Is it time to embrace building integrated Photovoltaics? A review with particular focus on Australia

[1]  Hoda Akbari,et al.  Efficient energy storage technologies for photovoltaic systems , 2019, Solar Energy.

[2]  Martin A. Green,et al.  Solar cell efficiency tables (Version 53) , 2018, Progress in Photovoltaics: Research and Applications.

[3]  Meng Wang,et al.  A Review of the Energy Performance and Life-Cycle Assessment of Building-Integrated Photovoltaic (BIPV) Systems , 2018, Energies.

[4]  P. Ferrão,et al.  Putting rooftops to use – A Cost-Benefit Analysis of food production vs. energy generation under Mediterranean climates , 2018, Cities.

[5]  Patrick Criqui,et al.  After the Paris Agreement: Measuring the Global Decarbonization Wedges From National Energy Scenarios , 2018, Ecological Economics.

[6]  Vesna Kosorić,et al.  General model of Photovoltaic (PV) integration into existing public high-rise residential buildings in Singapore – Challenges and benefits , 2018, Renewable and Sustainable Energy Reviews.

[7]  Wilfried G.J.H.M. van Sark,et al.  A comparative review of building integrated photovoltaics ecosystems in selected European countries , 2018, Renewable and Sustainable Energy Reviews.

[8]  K. Sudhakar,et al.  Performance analysis of solar powered airport based on energy and exergy analysis , 2018 .

[9]  Nadia Maïzi,et al.  Contribution of global GHG reduction pledges to bioenergy expansion , 2018 .

[10]  Firas Obeidat,et al.  A comprehensive review of future photovoltaic systems , 2018 .

[11]  Alvaro Marucci,et al.  A combination of agricultural and energy purposes: Evaluation of a prototype of photovoltaic greenhouse tunnel , 2018 .

[12]  Amimul Ahsan,et al.  Solar panels: Real efficiencies, potential productions and payback periods for major Australian cities , 2018 .

[13]  M. Tripathy,et al.  Performance of building integrated photovoltaic thermal systems for the panels installed at optimum tilt angle , 2017 .

[14]  Richard R. Lunt,et al.  Emergence of highly transparent photovoltaics for distributed applications , 2017 .

[15]  Yiming Liu,et al.  Cooled solar PV panels for output energy efficiency optimisation , 2017 .

[16]  Y. Tripanagnostopoulos,et al.  Greenhouse performance results for roof installed photovoltaics , 2017 .

[17]  Manish Kumar,et al.  Performance assessment and degradation analysis of solar photovoltaic technologies: A review , 2017 .

[18]  Hongxing Yang,et al.  Comparison of energy performance between PV double skin facades and PV insulating glass units , 2017 .

[19]  Juan Luis Lechón,et al.  Experimental and numerical studies to assess the energy performance of naturally ventilated PV façade systems , 2017 .

[20]  Yuan Wang,et al.  Green building evaluation from a life-cycle perspective in Australia: A critical review , 2017 .

[21]  K. Yoshikawa,et al.  Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26% , 2017, Nature Energy.

[22]  Xiaohua Xia,et al.  A multi-objective optimization model for energy-efficiency building envelope retrofitting plan with rooftop PV system installation and maintenance , 2017 .

[23]  E. Benini,et al.  Thermal and electrical performance of an integrated PV-PCM system in double skin façades: A numerical study , 2016 .

[24]  K. J. Sreekanth,et al.  Review on integrated strategies for energy policy planning and evaluation of GHG mitigation alternatives , 2016 .

[25]  Tapas K. Mallick,et al.  Environmental assessment of a building-integrated linear dielectric-based concentrating photovoltaic according to multiple life-cycle indicators , 2016 .

[26]  F. Faria,et al.  Economic feasibility analysis of small scale PV systems in different countries , 2016 .

[27]  Sarat Kumar Sahoo,et al.  Renewable and sustainable energy reviews solar photovoltaic energy progress in India: A review , 2016 .

[28]  S. C. Kaushik,et al.  A review on modeling, design methodology and size optimization of photovoltaic based water pumping, standalone and grid connected system , 2016 .

[29]  Soteris A. Kalogirou,et al.  Double skin facades (DSF) and building integrated photovoltaics (BIPV): A review of configurations and heat transfer characteristics , 2016 .

[30]  Hongxing Yang,et al.  Numerical investigation of the energy saving potential of a semi-transparent photovoltaic double-skin facade in a cool-summer Mediterranean climate , 2016 .

[31]  Zechun Hu,et al.  Photovoltaic and solar power forecasting for smart grid energy management , 2015 .

[32]  Hiep Duc,et al.  Toward sustainable energy usage in the power generation and construction sectors—a case study of Australia , 2015 .

[33]  Chi-ming Lai,et al.  Solar façades: A review , 2015 .

[34]  Hyun-Yong Lee,et al.  Recent progress of high efficiency Si thin‐film solar cells in large area , 2015 .

[35]  S. Koh,et al.  Environmental and economic analysis of building integrated photovoltaic systems in Italian regions , 2015 .

[36]  Defne Apul,et al.  Energy payback time (EPBT) and energy return on energy invested (EROI) of solar photovoltaic systems: A systematic review and meta-analysis , 2015 .

[37]  Brian Norton,et al.  Phase change materials for photovoltaic thermal management , 2015 .

[38]  N. W. Alnaser,et al.  Building integrated renewable energy to achieve zero emission in Bahrain , 2015 .

[39]  R. Frischknecht,et al.  Life cycle assessment of future photovoltaic electricity production from residential-scale systems operated in Europe , 2015 .

[40]  Rebecca J. Yang,et al.  Overcoming technical barriers and risks in the application of building integrated photovoltaics (BIPV): hardware and software strategies , 2015 .

[41]  Nuri Gokmen,et al.  Analysis of spatial fixed PV arrays configurations to maximize energy harvesting in BIPV applications , 2015 .

[42]  Hongxing Yang,et al.  Using phase change materials in photovoltaic systems for thermal regulation and electrical efficiency improvement: A review and outlook , 2015 .

[43]  M. McGehee,et al.  Minimal Long-Term Intrinsic Degradation Observed in a Polymer Solar Cell Illuminated in an Oxygen-Free Environment , 2015 .

[44]  Alan S. Fung,et al.  Modeling, simulation and feasibility analysis of residential BIPV/T+ASHP system in cold climate—Canada , 2014 .

[45]  Ival O. Salyer,et al.  A review of phase change materials research for thermal energy storage in heating and cooling applications at the University of Dayton from 1982 to 1996 , 2014 .

[46]  Xudong Yang,et al.  High‐Performance, Transparent, Dye‐Sensitized Solar Cells for See‐Through Photovoltaic Windows , 2014 .

[47]  Christophe Menezo,et al.  Experimental evaluation of a naturally ventilated PV double-skin building envelope in real operating conditions , 2014 .

[48]  Nalanie Mithraratne,et al.  Lifetime performance of semi-transparent building-integrated photovoltaic (BIPV) glazing systems in the tropics , 2014 .

[49]  Katia Perini,et al.  Cost–benefit analysis for green façades and living wall systems , 2013 .

[50]  M. J. de Wild-Scholten,et al.  Energy payback time and carbon footprint of commercial photovoltaic systems , 2013 .

[51]  Jeyraj Selvaraj,et al.  Energy policy to promote photovoltaic generation , 2013 .

[52]  Steve Sharples,et al.  Assessing the technical and economic performance of building integrated photovoltaics and their value to the GCC society , 2013 .

[53]  Christophe Ballif,et al.  Building Integrated Photovoltaics (BIPV): Review, Potentials, Barriers and Myths , 2013 .

[54]  Huili Zhang,et al.  Concentrated solar power plants: Review and design methodology , 2013 .

[55]  Mohd Amran Mohd Radzi,et al.  A general approach toward building integrated photovoltaic systems and its implementation barriers: A review , 2013 .

[56]  Zongjin Li,et al.  Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage , 2013 .

[57]  Alfred Posch,et al.  "It Would Be a Shame if We Did Not Take Advantage of the Spirit of the Times …" An Analysis of Prospects and Barriers of Building Integrated Photovoltaics , 2013 .

[58]  K. Bhattacharya,et al.  System Stability Impact of Large-Scale and Distributed Solar Photovoltaic Generation: The Case of Ontario, Canada , 2013, IEEE Transactions on Sustainable Energy.

[59]  A. Haque,et al.  Building Integrated Photovoltaic system: Cost effectiveness , 2012, 2012 7th International Conference on Electrical and Computer Engineering.

[60]  Mohammad Masud Kamal. Khan,et al.  Techno-economic simulation and optimization of residential grid-connected PV system for the Queensland climate , 2012 .

[61]  Daniel R. Rousse,et al.  A comprehensive review of solar facades. Transparent and translucent solar facades , 2012 .

[62]  Bjørn Petter Jelle,et al.  Building integrated photovoltaic products: A state-of-the-art review and future research opportunities , 2012 .

[63]  Gülşah Y. Uzunoğlu,et al.  Investigation of the degradation mechanisms of a variety of organic photovoltaic devices by combination of imaging techniques—the ISOS-3 inter-laboratory collaboration , 2012 .

[64]  Ying Huang,et al.  Building-integrated photovoltaics (BIPV) in architectural design in China , 2011 .

[65]  R. V. Zaitsev,et al.  The influence of prolonged storage and forward-polarity voltage on the efficiency of CdS/CdTe-based film solar cells , 2011 .

[66]  K F Katiraei,et al.  Solar PV Integration Challenges , 2011, IEEE Power and Energy Magazine.

[67]  Herricos Stapountzis,et al.  Energy analysis of an improved concept of integrated PV panels in an office building in central Greece , 2011 .

[68]  M M A Salama,et al.  Investigation of Methods for Reduction of Power Fluctuations Generated From Large Grid-Connected Photovoltaic Systems , 2011, IEEE Transactions on Energy Conversion.

[69]  Lin Lu,et al.  Environmental payback time analysis of a roof-mounted building-integrated photovoltaic (BIPV) system in Hong Kong , 2010 .

[70]  Ruijiang Hong,et al.  Application of phosphorus diffusion gettering process on upgraded metallurgical grade Si wafers and solar cells , 2010 .

[71]  Brian Norton,et al.  Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics , 2010 .

[72]  Mark Diesendorf,et al.  Design limitations in Australian renewable electricity policies , 2010 .

[73]  G. J. Yu,et al.  Analysis of thermal and electrical performance of semi-transparent photovoltaic (PV) module , 2010 .

[74]  Keiichiro Sakurai,et al.  Development of high-efficiency flexible Cu(In,Ga)Se2 solar cells: A study of alkali doping effects on CIS, CIGS, and CGS using alkali-silicate glass thin layers , 2010 .

[75]  Rosaria Ciriminna,et al.  BIPV: merging the photovoltaic with the construction industry , 2010 .

[76]  G. Garnero,et al.  The territorial and landscape impacts of photovoltaic systems: Definition of impacts and assessment of the glare risk , 2009 .

[77]  M. J. Huang,et al.  The effect of using two PCMs on the thermal regulation performance of BIPV systems , 2009 .

[78]  R. Martínez-Béjar,et al.  Life cycle assessment study of a 4.2 kWp stand-alone photovoltaic system , 2009 .

[79]  Danny H.W. Li,et al.  Energy and cost analysis of semi-transparent photovoltaic in office buildings , 2009 .

[80]  K. C. Divya,et al.  Battery Energy Storage Technology for power systems-An overview , 2009 .

[81]  Adrian Pitts,et al.  The potential to exploit use of building-integrated photovoltaics in countries of the Gulf Cooperation Council , 2009 .

[82]  John A Rogers,et al.  Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designs. , 2008, Nature materials.

[83]  L. Y. Seng,et al.  Economical, environmental and technical analysis of building integrated photovoltaic systems in Malaysia , 2008 .

[84]  Christophe Menezo,et al.  Experimental natural convection on vertical surfaces for building integrated photovoltaic (BIPV) applications , 2008 .

[85]  Tariq Muneer,et al.  Optimal sizing and life cycle assessment of residential photovoltaic energy systems with battery storage , 2008 .

[86]  Mahjoub Elnimeiri,et al.  Critical Factors in Reducing the Cost of Building Integrated Photovoltaic (BIPV) Systems , 2007 .

[87]  Gregory A. Keoleian,et al.  Parameters affecting the life cycle performance of PV technologies and systems , 2007 .

[88]  Brian Norton,et al.  Phase change materials for limiting temperature rise in building integrated photovoltaics , 2006 .

[89]  Huey Pang,et al.  From PILOT to ROLLOUT: Capacity building and stakeholder engagement to promote a territory-wide BIPV programme , 2006, 2006 IEEE 4th World Conference on Photovoltaic Energy Conference.

[90]  Jinli Zhang,et al.  Interactions between Building Integrated Photovoltaics and Microclimate in Urban Environments , 2006 .

[91]  Helmut Neugebauer,et al.  Flexible encapsulation for organic solar cells , 2006, SPIE Photonics Europe.

[92]  Danny H.W. Li,et al.  Study of models for predicting the diffuse irradiance on inclined surfaces , 2005 .

[93]  Philip C. Eames,et al.  Thermal regulation of building-integrated photovoltaics using phase change materials , 2004 .

[94]  T. Nordmann,et al.  Understanding temperature effects on PV system performance , 2003, 3rd World Conference onPhotovoltaic Energy Conversion, 2003. Proceedings of.

[95]  Gregory A. Keoleian,et al.  Modeling the life cycle energy and environmental performance of amorphous silicon BIPV roofing in the US , 2003 .

[96]  Thomas Jackson,et al.  Energy and economic evaluation of building-integrated photovoltaics , 2001 .

[97]  Evert Nieuwlaar,et al.  Energy viability of photovoltaic systems , 2000 .

[98]  D. Feldman,et al.  Fatty acids and their mixtures as phase-change materials for thermal energy storage , 1989 .

[99]  Nebojša Jakica,et al.  State-of-the-art review of solar design tools and methods for assessing daylighting and solar potential for building-integrated photovoltaics , 2018 .

[100]  Byungil Kim,et al.  Determining the optimal installation timing of building integrated photovoltaic systems , 2017 .

[101]  N. Rajasekar,et al.  A comprehensive review on solar PV maximum power point tracking techniques , 2017 .

[102]  Ramesh C. Bansal,et al.  A review of key power system stability challenges for large-scale PV integration , 2015 .

[103]  Bharath Seshadri,et al.  Temperature Dependent Photovoltaic (PV) Efficiency and Its Effect on PV Production in the World – A Review☆ , 2013 .

[104]  H. Y. Rahman,et al.  Building Integrated Photovoltaic (BIPV) in Malaysia: An Economic Feasibility Study , 2012 .

[105]  Patrick A. Narbel,et al.  Solar energy: Markets, economics and policies , 2012 .

[106]  Geoffrey P. Hammond,et al.  Whole systems appraisal of a UK Building Integrated Photovoltaic (BIPV) system: Energy, environmental, and economic evaluations , 2012 .

[107]  Jo Dewulf,et al.  Life Cycle Analysis to estimate the environmental impact of residential photovoltaic systems in regions with a low solar irradiation , 2011 .

[108]  Jörg Müller,et al.  Latest Trends in Development and Manufacturing of Industrial, Crystalline Silicon Solar-Cells , 2011 .

[109]  Majid Dehghani,et al.  The Effect of Temperature on Photovoltaic Cell Efficiency , 2011 .

[110]  Miwa Tominaga,et al.  Opportunities for thin film photovoltaics in Building Integrated photovoltaics (BIPV)with a focus on Australia , 2009 .

[111]  Roger Flanagan,et al.  The need of sustainable buildings construction in the Kingdom of Bahrain , 2007 .

[112]  E. Radziemska.  The effect of temperature on the power drop in crystalline silicon solar cells , 2003 .

[113]  J. Michalsky,et al.  Modeling daylight availability and irradiance components from direct and global irradiance , 1990 .

[114]  Hiroshi Kimura,et al.  Mixtures of calcium chloride hexahydrate with some salt hydrates or anhydrous salts as latent heat storage materials , 1988 .