Improving spray coated organic photodetectors performance by using 1,8-diiodooctane as processing additive

[1]  Arnaud Curutchet,et al.  Long-Term Stable Organic Photodetectors with Ultra Low Dark Currents for High Detectivity Applications , 2016, Scientific Reports.

[2]  Hongbin Wu,et al.  High Sensitivity Polymer Visible-Near Infrared Photodetectors via an Inverted Device Structure and Manipulation of Injection Barrier Height. , 2016, Small.

[3]  Y. Rim,et al.  Recent Progress in Materials and Devices toward Printable and Flexible Sensors , 2016, Advanced materials.

[4]  Bertrand J. Tremolet de Villers,et al.  Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers , 2016 .

[5]  Kris Myny,et al.  X-Ray Detector-on-Plastic With High Sensitivity Using Low Cost, Solution-Processed Organic Photodiodes , 2016, IEEE Transactions on Electron Devices.

[6]  M. Toney,et al.  Effect of Solvent Additives on the Solution Aggregation of Phenyl-C61–Butyl Acid Methyl Ester (PCBM) , 2015 .

[7]  Dezhi Yang,et al.  Extremely Low Dark Current, High Responsivity, All‐Polymer Photodetectors with Spectral Response from 300 nm to 1000 nm , 2015 .

[8]  Q. Qiao,et al.  Versatile Role of Solvent Additive for Tailoring Morphology in Polymer Solar Cells for Efficient Charge Transport. , 2015, Journal of nanoscience and nanotechnology.

[9]  Jianhui Hou,et al.  Toward efficient non-fullerene polymer solar cells: Selection of donor polymers , 2015 .

[10]  U. Jeng,et al.  Complementary solvent additives tune the orientation of polymer lamellae, reduce the sizes of aggregated fullerene domains, and enhance the performance of bulk heterojunction solar cells , 2014 .

[11]  Manfred Burghammer,et al.  A customizable software for fast reduction and analysis of large X-ray scattering data sets: applications of the new DPDAK package to small-angle X-ray scattering and grazing-incidence small-angle X-ray scattering , 2014, Journal of applied crystallography.

[12]  Fujun Zhang,et al.  The underlying reason of DIO additive on the improvement polymer solar cells performance , 2014 .

[13]  Ashish Dubey,et al.  Interplay of nanoscale domain purity and size on charge transport and recombination dynamics in polymer solar cells. , 2014, Nanoscale.

[14]  Hany Aziz,et al.  Formulation strategies for optimizing the morphology of polymeric bulk heterojunction organic solar cells: a brief review , 2014 .

[15]  Jayanta K. Baral,et al.  Relating chemical structure to device performance via morphology control in diketopyrrolopyrrole-based low band gap polymers. , 2013, Journal of the American Chemical Society.

[16]  Weiwei Li,et al.  Universal correlation between fibril width and quantum efficiency in diketopyrrolopyrrole-based polymer solar cells. , 2013, Journal of the American Chemical Society.

[17]  Nicolas Chevalier,et al.  Work Function Tuning for High‐Performance Solution‐Processed Organic Photodetectors with Inverted Structure , 2013, Advanced materials.

[18]  Meng-Huan Jao,et al.  Additives for morphology control in high-efficiency organic solar cells , 2013 .

[19]  M. Wienk,et al.  High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. , 2013, Angewandte Chemie.

[20]  Long Ye,et al.  Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells , 2013 .

[21]  Paolo Lugli,et al.  Large Active Area Organic Photodiodes for Short-Pulse X-Ray Detection , 2013, IEEE Transactions on Electron Devices.

[22]  Long Ye,et al.  From Binary to Ternary Solvent: Morphology Fine‐tuning of D/A Blends in PDPP3T‐based Polymer Solar Cells , 2012, Advanced materials.

[23]  C. Deibel,et al.  A New Approach for Probing the Mobility and Lifetime of Photogenerated Charge Carriers in Organic Solar Cells Under Real Operating Conditions , 2012, Advanced materials.

[24]  Yongfang Li,et al.  High efficiency polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisadduct with solvent additive , 2012 .

[25]  R. Street,et al.  Radiation induced recombination centers in organic solar cells , 2012 .

[26]  T. Russell,et al.  A high mobility conjugated polymer based on dithienothiophene and diketopyrrolopyrrole for organic photovoltaics , 2012 .

[27]  R. A. Street,et al.  Localized state distribution and its effect on recombination in organic solar cells , 2011 .

[28]  Robert A. Street,et al.  Photoconductivity measurements of the electronic structure of organic solar cells , 2011 .

[29]  C. Brabec,et al.  Influence of blend microstructure on bulk heterojunction organic photovoltaic performance. , 2011, Chemical Society reviews.

[30]  Robert A. Street,et al.  Transient photoconductivity in polymer bulk heterojunction solar cells: Competition between sweep-out and recombination , 2011 .

[31]  Claire H. Woo,et al.  Incorporation of furan into low band-gap polymers for efficient solar cells. , 2010, Journal of the American Chemical Society.

[32]  D. D. de Leeuw,et al.  Efficient Solar Cells Based on an Easily Accessible Diketopyrrolopyrrole Polymer , 2010, Advanced materials.

[33]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[34]  D. D. de Leeuw,et al.  Poly(diketopyrrolopyrrole-terthiophene) for ambipolar logic and photovoltaics. , 2009, Journal of the American Chemical Society.

[35]  Christoph J. Brabec,et al.  Topographical and morphological aspects of spray coated organic photovoltaics , 2009 .

[36]  Paolo Lugli,et al.  Fully spray coated organic photodiodes. , 2009, Nano letters.

[37]  Juhwan Kim,et al.  Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation , 2007 .

[38]  J. Kǒcka,et al.  Extraction current transients: new method of study of charge transport in microcrystalline silicon , 2000, Physical review letters.