Simulation on transportation safety of ice slurry in ice cooling system of buildings

Abstract Ice storage systems are capable of shifting the electricity demand from on-peak hours to off-peak hours, and ice slurry becomes more widely used as an efficient cooling medium for replacing the traditional ice-on-coil system. However, ice blockage is a severe problem threatening the transportation safety of ice cooling systems. In this paper, a method for determining the critical velocity for safe transportation is proposed. Moreover, mechanical analysis is carried out to find out the stratification mechanism. This paper focuses on numerical simulation of ice slurry flow, and aims to find out influences of the following factors on transportation safety: ice packing fractions, ice particle size, additive concentrations and pipe size. According to the simulation, the IPF is suggested to be 20–25%; ice particle diameters are suggested to be within 100 μm; ethanol concentrations are suggested to be in the range of 5–10 wt%. In addition, reducing pipe diameters is beneficial to transportation safety. The results and proposed guidelines are of significance for predicting the critical velocity for safe transportation and guiding the safety design and operation of ice cooling systems.

[1]  Qiqi Tian,et al.  Experimental study of the supercooling heat exchanger coated with fluorocarbon coating , 2012 .

[2]  Moncef Krarti,et al.  Guidelines for improved performance of ice storage systems , 2003 .

[3]  Dvora Barnea,et al.  Flow pattern maps for solid-liquid flow in pipes , 1996 .

[4]  G. Quarini,et al.  The anomalous pressure drop behaviour of ice slurries flowing through constrictions , 2008 .

[5]  Ni Liu,et al.  Optimization of ice making period for ice storage system with flake ice maker , 2008 .

[6]  M. Kawaji,et al.  Thermal and flow behavior of ice slurries in a vertical rectangular channel. Part I: Local distribution measurements in adiabatic flow , 2005 .

[7]  Denis Flick,et al.  Modelling and numerical simulation of ice slurry storage tank , 2007 .

[8]  Saifur Rahman,et al.  Impacts of ice storage on electrical energy consumptions in office buildings , 2012 .

[9]  P. Egolf,et al.  The fluid dynamics of ice slurry , 2005 .

[10]  J. Jurng,et al.  Study on ice slurry production by water spray , 1998 .

[11]  M Kauffeld,et al.  ICE SLURRY APPLICATIONS. , 2010, Revue internationale du froid.

[12]  G L Quarini,et al.  Pressure drop of flowing ice slurries in industrial heat exchangers , 2009 .

[13]  Å. Melinder.  PROPERTIES AND OTHER ASPECTS OF AQUEOUS SOLUTIONS USED FOR SINGLE-PHASE AND ICE SLURRY APPLICATIONS , 2010 .

[14]  Xiaosong Zhang,et al.  A novel ice slurry producing system: Producing ice by utilizing inner waste heat , 2009 .

[15]  Qiqi Tian,et al.  Effects of nano-fluorocarbon coating on icing , 2012 .

[16]  Michael J. Benz,et al.  Cost-optimal design of an ice-storage cooling system using mixed-integer linear programming techniques under various electricity tariff schemes , 2012 .

[18]  Savvas A. Tassou,et al.  Present and future applications of ice slurries , 2005 .

[19]  T. Newell,et al.  Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux , 2007 .

[20]  H. Barnes,et al.  An introduction to rheology , 1989 .

[21]  Effects of storage on flow and heat transfer characteristics of ice slurry , 2012 .

[22]  V. Ayel,et al.  Rheology, flow behaviour and heat transfer of ice slurries: a review of the state of the art , 2003 .

[23]  M. Kawaji,et al.  Thermal and flow behavior of ice slurries in a vertical rectangular channel—Part II. Forced convective melting heat transfer , 2005 .