Statistics for the strength and size effects of microcomposites with four carbon fibers in epoxy resin

Abstract Experimental results are presented for the strength distribution and length effects of carbon/epoxy microcomposites consisting of four carbon fibers (Hercules AS4) embedded in one of two different epoxies approximately in a square array at a fiber volume fraction of about 0.7. One epoxy (Dow DER 331 with Dow DEH 26 hardener) was stiff in bulk with a strain to failure of less than 10%, and the other (50% by weight of Dow DER 331 blended with 50% Dow DER 732 and Dow DEH 26 hardener) was very flexible in bulk with large apparent ductility and a strain to failure of 40%. Individual fibers tested at two gauge lengths, 1 and 20 cm, yielded a Weibull shape parameter of about 5 at each length, but the strength versus length plot for the scale parameter on log-log coordinates suggested a Weibull shape parameter of about 8.3. Therefore, the ratio a was about 0.6 rather than unity as in previous work in microcomposites. Thus a modified statistical theory for microcomposite strength as a function of length was developed to incorporate this a effect. Experimental verification of both the size effect and a effect are the two major advantages of the present model over previous Weibull fiber composite models. Strength data for microcomposites at two gauge lengths, 1 and 20 cm, for both epoxies were generated and plotted on Weibull coordinates, where both the expected doubling and tripling of the Weibull shape parameter as compared to that of the fiber and the predicted a effect for microcomposite length were observed. The stiff epoxy produced stronger composites at both gauge lengths. On the other hand, the length effect was more severe than predicted in the 20 cm flexible epoxy microcomposite apparently due to a combination of epoxy yielding in shear and fiber/matrix debonding at fiber breaks, and a lower matrix ultimate strength, leading to longer effective load transfer lengths, δ.

[1]  H. W. Herring,et al.  Selected mechanical and physical properties of boron filaments , 1966 .

[2]  Peter Schwartz,et al.  Statistics for the strength and lifetime in creep-rupture of model carbon/epoxy composites , 1988 .

[3]  S. L. Phoenix,et al.  The Chain-of-Bundles Probability Model For the Strength of Fibrous Materials I: Analysis and Conjectures , 1978 .

[4]  Richard L. Smith,et al.  An examination of statistical theories for fibrous materials in the light of experimental data , 1985 .

[5]  M. G. Bader,et al.  Failure micromechanisms in continuous carbon-fibre/epoxy-resin composites , 1993 .

[6]  G. Dvorak,et al.  Analysis of first ply failure in composite laminates , 1986 .

[7]  S. Phoenix,et al.  Interfacial Shear Strength Studies Using the Single-Filament-Composite Test. I: Experiments on Graphite Fibers in Epoxy , 1989 .

[8]  R. E. Bullock,et al.  Strength Ratios of Composite Materials in Flexure and in Tension , 1974 .

[9]  J. Schultz,et al.  Effect of elastic moduli and interfacial adhesion energy on the critical fibre aspect ratio in single-fibre composites , 1993 .

[10]  S. L. Phoenix,et al.  Lower-tail approximations for the probability of failure of three-dimensional fibrous composites with hexagonal geometry , 1983, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[11]  Y. Qiu,et al.  A new method for study of the fiber-matrix interface in composites: single fiber pull-out from a microcomposite , 1991 .

[12]  Y. Termonia.  Dependence of fibre critical length on modulus in single-fibre composites , 1993 .

[13]  H. Herrmann,et al.  Statistical models for the fracture of disordered media. North‐Holland, 1990, 353 p., ISBN 0444 88551x (hardbound) US $ 92.25, 0444 885501 (paperback) US $ 41.00 , 1990 .

[14]  Michael R Wisnom,et al.  The effect of specimen size on the bending strength of unidirectional carbon fibre-epoxy , 1991 .

[15]  R. L. Smith,et al.  A comparison of probabilistic techniques for the strength of fibrous materials under local load-sharing among fibers☆ , 1983 .

[16]  J. Eisenmann,et al.  Macroscopic Fracture Mechanics of Advanced Composite Materials , 1971 .

[17]  P. Petrina,et al.  Matrix effects on lifetime statistics for carbon fibre-epoxy microcomposites in creep rupture , 1991, Journal of Materials Science.

[18]  Y. Mai,et al.  Stress transfer in the fibre fragmentation test , 1993, Journal of Materials Science.

[19]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[20]  D. C. Phillips,et al.  The effect of specimen size on the strength of cfrp , 1978 .

[21]  Y. Mai,et al.  Stress transfer in the fibre fragmentation test , 1995 .

[22]  Peter Schwartz,et al.  A Study of Statistical Variability in the Strength of Single Aramid Filaments , 1984 .

[23]  Robert Croman,et al.  Scale Effect in Fatigue Of Composite Materials* , 1979 .

[24]  2.5D fabrics for delamination resistant composite structures , 1994 .

[25]  Carl Zweben,et al.  Test Methods for Fiber Tensile Strength, Composite Flexural Modulus, and Properties of Fabric-Reinforced Laminates , 1979 .