论文信息 - Tracking control of piezoelectric actuator based on a new mathematical model

Tracking control of piezoelectric actuator based on a new mathematical model

A major deficiency of piezoelectric actuators is that their open-loop control accuracy is seriously limited by hysteresis. In this paper, a novel mathematical model is proposed to describe hysteresis precisely and a new parameter called turning voltage is introduced. It was found experimentally that the shapes of hysteresis curves are decided by the value of the turning voltage. A computer-based inverse control approach under open-loop operation based on the mathematical model was applied to suppress the inherent hysteresis to within ±1% full span range of a stack piezoelectric actuator and the performance of the piezoelectric actuator is noticeably improved.

S. Li-ning | Ru Chang-hai | Rong Weibin | C. Liguo | Kong Minxiu

[1] C. Newcomb,et al. Improving the linearity of piezoelectric ceramic actuators , 1982 .

[2] H. Kaizuka,et al. A Simple Way to Reduce Hysteresis and Creep When Using Piezoelectric Actuators , 1988 .

[3] J-D Kim,et al. Development of a Micro-Positioning Grinding Table Using Piezoelectric Voltage Feedback , 1995 .

[4] Musa Jouaneh,et al. Modeling hysteresis in piezoceramic actuators , 1995 .

[5] Hartmut Janocha,et al. Compensation of hysteresis in solid-state actuators , 1995 .

[6] Michael Goldfarb,et al. A Lumped Parameter Electromechanical Model for Describing the Nonlinear Behavior of Piezoelectric Actuators , 1997 .

[7] Musa Jouaneh,et al. Generalized preisach model for hysteresis nonlinearity of piezoceramic actuators , 1997 .

[8] K. Furutani,et al. Displacement control of piezoelectric element by feedback of induced charge , 1998 .

[9] Y. Stepanenko,et al. Intelligent control of piezoelectric actuators , 1998, Proceedings of the 37th IEEE Conference on Decision and Control (Cat. No.98CH36171).