Poly(vinylidene fluoride)-based hybrid gel polymer electrolytes for additive-free lithium sulfur batteries

The permeation of dissolved lithium polysulfides across the porous polyolefin-based commercial separator is a major hindrance for using lithium sulfur batteries (LSBs). In this work, the poly(vinylidene fluoride) (PVDF)-based gel polymer electrolyte (GPE) with a compact morphology to block polysulfide penetration is prepared using a simple solution-casting method, and the strategy of incorporating poly(ethylene oxide) and nano zirconium dioxide is applied to guarantee electrolyte uptake and Li+ mobility. Superior to the commercial separator with liquid electrolyte, the LSB assembled with additive-free GPE exhibits a high initial capacity of 1429 mA h g−1, coulombic efficiency of 96% at 0.2C and improved rate performance. After 500 cycles at 1C, the LSB could still deliver a capacity of 847.2 mA h g−1, with a low fading rate of 0.05%. The LSB with high sulfur loading (5.2 mg cm−2) could attain a high areal capacity of 4.6 mA h cm−2. Results of scanning electron microscopy suggest that such a hybrid GPE could effectively protect the lithium anode from polysulfide corrosion. Therefore, this novel membrane of hybrid PVDF-based GPE provides a simple and effective method to establish high-performance LSBs.

[1]  A. Stephan,et al.  Review on gel polymer electrolytes for lithium batteries , 2006 .

[2]  Diana Golodnitsky,et al.  Lithium ion transport of solid electrolytes based on PEO/CF3SO3Li and aluminum carboxylate , 2007 .

[3]  Zhen-liang Xu,et al.  Preparation and characterization of PVDF-SiO2 composite hollow fiber UF membrane by sol-gel method , 2009 .

[4]  Xiao Xing Liang,et al.  Improved cycling performances of lithium sulfur batteries with LiNO 3-modified electrolyte , 2011 .

[5]  Shengbo Zhang,et al.  How a gel polymer electrolyte affects performance of lithium/sulfur batteries , 2013 .

[6]  Xiaogang Zhang,et al.  High performance lithium–sulfur batteries: advances and challenges , 2014 .

[7]  Donald R. Sadoway,et al.  Lithium–antimony–lead liquid metal battery for grid-level energy storage , 2014, Nature.

[8]  Hong‐Jie Peng,et al.  Permselective graphene oxide membrane for highly stable and anti-self-discharge lithium-sulfur batteries. , 2015, ACS nano.

[9]  Hao Wang,et al.  High performance composite polymer electrolytes using polymeric ionic liquid-functionalized graphene molecular brushes , 2015 .

[10]  Xiaoen Wang,et al.  Microporous polymer electrolyte based on PVDF/PEO star polymer blends for lithium ion batteries , 2015 .

[11]  Kangli Wang,et al.  A high performance sulfur-doped disordered carbon anode for sodium ion batteries , 2015 .

[12]  B. Tang,et al.  Study the effect of ion-complex on the properties of composite gel polymer electrolyte based on Electrospun PVdF nanofibrous membrane , 2015 .

[13]  B. Scrosati,et al.  Novel configuration of poly(vinylidenedifluoride)-based gel polymer electrolyte for application in lithium-ion batteries , 2015 .

[14]  Kai Xie,et al.  A 3D nanostructure of graphene interconnected with hollow carbon spheres for high performance lithium–sulfur batteries , 2015 .

[15]  A. Chinnappan,et al.  Zirconium dioxide nanofilled poly(vinylidene fluoride-hexafluoropropylene) complexed with lithium trifluoromethanesulfonate as composite polymer electrolyte for electrochromic devices , 2015 .

[16]  Dong Zhou,et al.  In-situ Fabrication of a Freestanding Acrylate-based Hierarchical Electrolyte for Lithium-sulfur Batteries , 2016 .

[17]  Z. Wen,et al.  A gel-ceramic multi-layer electrolyte for long-life lithium sulfur batteries. , 2016, Chemical communications.

[18]  Yi Cui,et al.  Entrapment of Polysulfides by a Black‐Phosphorus‐Modified Separator for Lithium–Sulfur Batteries , 2016, Advanced materials.

[19]  S. Ramesh,et al.  Novel poly(vinylidene fluoride-co-hexafluoro propylene)/polyethylene oxide based gel polymer electrolyte containing fumed silica (SiO2) nanofiller for high performance dye-sensitized solar cell , 2016 .

[20]  G. Silva,et al.  Improving supercapacitor capacitance by using a novel gel nanocomposite polymer electrolyte based on nanostructured SiO2, PVDF and imidazolium ionic liquid , 2016 .

[21]  Shijie Cheng,et al.  Liquid Metal Electrodes for Energy Storage Batteries , 2016 .

[22]  Z. Wen,et al.  Electronic and ionic co-conductive coating on the separator towards high-performance lithium–sulfur batteries , 2016 .

[23]  Kangli Wang,et al.  High Performance Liquid Metal Battery with Environmentally Friendly Antimony-Tin Positive Electrode. , 2016, ACS applied materials & interfaces.

[24]  Ming Liu,et al.  Novel gel polymer electrolyte for high- performance lithium-sulfur batteries , 2016 .

[25]  Kai Xi,et al.  Nitrogen, sulfur-codoped graphene sponge as electroactive carbon interlayer for high-energy and -power lithium–sulfur batteries , 2016 .

[26]  Guangjie Shao,et al.  High capacity and cycle stability Rechargeable Lithium–Sulfur batteries by sandwiched gel polymer electrolyte , 2016 .

[27]  Ming Liu,et al.  Recent innovative configurations in high-energy lithium–sulfur batteries , 2017 .

[28]  Wu Yang,et al.  Pyrrole as a promising electrolyte additive to trap polysulfides for lithium-sulfur batteries , 2017 .

[29]  L. M. Rodriguez-Martinez,et al.  Lithium Bis(fluorosulfonyl)imide/Poly(ethylene oxide) Polymer Electrolyte for All Solid-State Li-S Cell. , 2017, The journal of physical chemistry letters.

[30]  Hanwen Liu,et al.  Ultrafine nano-sulfur particles anchored on in situ exfoliated graphene for lithium–sulfur batteries , 2017 .

[31]  Zhongqiang Shan,et al.  A nitrogen-doped 3D hierarchical carbon/sulfur composite for advanced lithium sulfur batteries , 2017 .

[32]  Yusheng Yang,et al.  Strategies of constructing stable and high sulfur loading cathodes based on the blade-casting technique , 2017 .

[33]  Shuru Chen,et al.  High capacity of lithium-sulfur batteries at low electrolyte/sulfur ratio enabled by an organosulfide containing electrolyte , 2017 .