Nonlinear Modeling and Decoupling Control of XY Micropositioning Stages With Piezoelectric Actuators
暂无分享,去创建一个
[1] G. Jayanth,et al. Modeling and Design of a Magnetically Actuated Two-Axis Compliant Micromanipulator for Nanomanipulation , 2010, IEEE/ASME Transactions on Mechatronics.
[2] Yonghong Tan,et al. Identification of sandwich systems with hysteresis based on two-stage method , 2010, Proceedings of the 2010 International Conference on Modelling, Identification and Control.
[3] John Dorsey. Continuous And Discrete Control Systems: Modeling, Identification, Design, And Implementation , 2001 .
[4] Ruoyu Li,et al. Recursive Identification of Sandwich Systems With Dead Zone and Application , 2009, IEEE Transactions on Control Systems Technology.
[5] Xinliang Zhang,et al. A hybrid model for rate-dependent hysteresis in piezoelectric actuators , 2010 .
[6] Qingsong Xu,et al. Development and Assessment of a Novel Decoupled XY Parallel Micropositioning Platform , 2010, IEEE/ASME Transactions on Mechatronics.
[7] Xinkai Chen. Adaptive control for systems preceded by hysteresis represented by Preisach model , 2010, ALCOSP.
[8] Masoud Tahani,et al. Higher-order coupled and uncoupled analyses of free edge effect in piezoelectric laminates under mechanical loadings , 2009 .
[9] Fouad Giri,et al. Identification of Hammerstein systems in presence of hysteresis-backlash and hysteresis-relay nonlinearities , 2008, Autom..
[10] B. Bhikkaji,et al. Integral Resonant Control of a Piezoelectric Tube Actuator for Fast Nanoscale Positioning , 2008, IEEE/ASME Transactions on Mechatronics.
[11] Yonghong Tan,et al. On-line identification algorithm and convergence analysis for sandwich systems with backlash , 2011 .
[12] Jozef Vörös,et al. Parameter identification of Wiener systems with multisegment piecewise-linear nonlinearities , 2007, Syst. Control. Lett..
[13] Yonghong Tan,et al. On-line modeling of sandwich systems with dead zone , 2007, 2007 International Conference on Control, Automation and Systems.
[14] Hui Chen,et al. A neural networks based model for rate-dependent hysteresis for piezoceramic actuators , 2008 .
[15] A.J. Fleming. Nanopositioning System With Force Feedback for High-Performance Tracking and Vibration Control , 2010, IEEE/ASME Transactions on Mechatronics.
[16] Qingsong Xu,et al. Design, Fabrication, and Visual Servo Control of an XY Parallel Micromanipulator With Piezo-Actuation , 2009, IEEE Transactions on Automation Science and Engineering.
[17] H.-Y. Chen,et al. Adaptive sliding control with self-tuning fuzzy compensation for a piezoelectrically actuated X–Y table , 2010 .
[18] Yonghong Tan,et al. Modeling Hysteresis and Its Inverse Model Using Neural Networks Based on Expanded Input Space Method , 2008, IEEE Transactions on Control Systems Technology.
[19] Shorya Awtar,et al. Constraint-based design of parallel kinematic XY flexure mechanisms , 2007 .
[20] R. Merry,et al. Using a Walking Piezo Actuator to Drive and Control a High-Precision Stage , 2009, IEEE/ASME Transactions on Mechatronics.
[21] Qingsong Xu,et al. Precise tracking control of a piezoactuated micropositioning stage based on modified Prandtl-Ishlinskii hysteresis model , 2010, 2010 IEEE International Conference on Automation Science and Engineering.
[22] Mohammad Bagher Menhaj,et al. Training feedforward networks with the Marquardt algorithm , 1994, IEEE Trans. Neural Networks.
[23] Jingyan Dong,et al. Development of a High-Bandwidth XY Nanopositioning Stage for High-Rate Micro-/Nanomanufacturing , 2011, IEEE/ASME Transactions on Mechatronics.
[24] Qingze Zou,et al. Iterative control of dynamics-coupling-caused errors in piezoscanners during high-speed AFM operation , 2005, IEEE Transactions on Control Systems Technology.
[25] Qingsong Xu,et al. Dahl Model-Based Hysteresis Compensation and Precise Positioning Control of an XY Parallel Micromanipulator With Piezoelectric Actuation , 2010 .
[26] Yuen Kuan Yong,et al. Design, Identification, and Control of a Flexure-Based XY Stage for Fast Nanoscale Positioning , 2009, IEEE Transactions on Nanotechnology.
[27] Gang Tao,et al. Adaptive control of plants with unknown hystereses , 1995 .
[28] S. E. Prasad,et al. Design, Modeling, and Closed-Loop Control of a Complementary Clamp Piezoworm Stage , 2009, IEEE/ASME Transactions on Mechatronics.
[29] Xiulan Bao,et al. Master and slave control of a dual-stage for precision positioning , 2008, 2008 3rd IEEE International Conference on Nano/Micro Engineered and Molecular Systems.
[30] C. Su,et al. An Analytical Generalized Prandtl–Ishlinskii Model Inversion for Hysteresis Compensation in Micropositioning Control , 2011, IEEE/ASME Transactions on Mechatronics.
[31] Murti V. Salapaka,et al. Piezoelectric scanners for atomic force microscopes: design of lateral sensors, identification and control , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).
[32] U-Xuan Tan,et al. A Low-Cost Flexure-Based Handheld Mechanism for Micromanipulation , 2011, IEEE/ASME Transactions on Mechatronics.
[33] Jinchuan Zheng,et al. Feedforward decoupling control design for dual-actuator system in hard disk drives , 2004 .
[34] Placid Mathew Ferreira,et al. Design analysis, fabrication and testing of a parallel-kinematic micropositioning XY stage , 2007 .
[35] Yonghong Tan,et al. Neural networks based identification and compensation of rate-dependent hysteresis in piezoelectric actuators , 2010 .
[36] Andrew J. Fleming,et al. Integrated strain and force feedback for high-performance control of piezoelectric actuators , 2010 .