A Gene Expression Programming Model for Predicting Tunnel Convergence

Underground spaces have become increasingly important in recent decades in metropolises. In this regard, the demand for the use of underground spaces and, consequently, the excavation of these spaces has increased significantly. Excavation of an underground space is accompanied by risks and many uncertainties. Tunnel convergence, as the tendency for reduction of the excavated area due to change in the initial stresses, is frequently observed, in order to monitor the safety of construction and to evaluate the design and performance of the tunnel. This paper presents a model/equation obtained by a gene expression programming (GEP) algorithm, aiming to predict convergence of tunnels excavated in accordance to the New Austrian Tunneling Method (NATM). To obtain this goal, a database was prepared based on experimental datasets, consisting of six input and one output parameter. Namely, tunnel depth, cohesion, frictional angle, unit weight, Poisson’s ratio, and elasticity modulus were considered as model inputs, while the cumulative convergence was utilized as the model’s output. Configurations of the GEP model were determined through the trial-error technique and finally an optimum model is developed and presented. In addition, an equation has been extracted from the proposed GEP model. The comparison of the GEP-derived results with the experimental findings, which are in very good agreement, demonstrates the ability of GEP modeling to estimate the tunnel convergence in a reliable, robust, and practical manner.

[1]  Panagiotis G. Asteris,et al.  Supervised Machine Learning Techniques to the Prediction of Tunnel Boring Machine Penetration Rate , 2019, Applied Sciences.

[2]  Hao Wang,et al.  Predicting tunnel convergence using Multivariate Adaptive Regression Spline and Artificial Neural Network , 2013 .

[3]  Abbas Abbaszadeh Shahri,et al.  An Optimized Artificial Neural Network Structure to Predict Clay Sensitivity in a High Landslide Prone Area Using Piezocone Penetration Test (CPTu) Data: A Case Study in Southwest of Sweden , 2016 .

[4]  Hosein Rafiai,et al.  An approximate ANN-based solution for convergence of lined circular tunnels in elasto-plastic rock masses with anisotropic stresses , 2012 .

[5]  Satar Mahdevari,et al.  A dynamically approach based on SVM algorithm for prediction of tunnel convergence during excavation , 2013 .

[6]  Liborio Cavaleri,et al.  Modeling of surface roughness in electro-discharge machining using artificial neural networks , 2017 .

[7]  Liborio Cavaleri,et al.  Prediction of Surface Treatment Effects on the Tribological Performance of Tool Steels Using Artificial Neural Networks , 2019, Applied Sciences.

[8]  Iman Mansouri,et al.  Novel Predictive Model of the Debonding Strength for Masonry Members Retrofitted with FRP , 2016 .

[9]  Ahmad Fahimifar,et al.  Analytical approach for the design of active grouted rockbolts in tunnel stability based on convergence-confinement method , 2009 .

[10]  Qiuming Gong,et al.  Tunnelling through a frequently changing and mixed ground : a case history in Singapore , 2007 .

[11]  Panagiotis G. Asteris,et al.  Developing GEP tree-based, neuro-swarm, and whale optimization models for evaluation of bearing capacity of concrete-filled steel tube columns , 2019, Engineering with Computers.

[12]  Pierpaolo Oreste Analysis of the Interaction between the Lining of a TBM Tunnel and the Ground Using the Convergence-Confinement Method , 2015 .

[13]  Z. Eisenstein,et al.  Convergence—Confinement method in shallow tunnels , 1991 .

[14]  Hui Chen,et al.  Assessing Dynamic Conditions of the Retaining Wall: Developing Two Hybrid Intelligent Models , 2019, Applied Sciences.

[15]  Celestino Ordóñez,et al.  Measurement system with angular encoders for continuous monitoring of tunnel convergence , 2016 .

[16]  Masoud Monjezi,et al.  Application of artificial intelligence algorithms in predicting tunnel convergence to avoid TBM jamming phenomenon , 2012 .

[17]  M. Hajihassani,et al.  3D prediction of tunneling-induced ground movements based on a hybrid ANN and empirical methods , 2019, Engineering with Computers.

[18]  Panagiotis G. Asteris,et al.  Prediction of the compressive strength of self-compactingconcrete using surrogate models , 2019 .

[19]  Aminaton Marto,et al.  Neuro-fuzzy technique to predict air-overpressure induced by blasting , 2015, Arabian Journal of Geosciences.

[20]  P. G. Asteris,et al.  Compressive strength of natural hydraulic lime mortars using soft computing techniques , 2019, Procedia Structural Integrity.

[21]  Aminaton Marto,et al.  Prediction of airblast-overpressure induced by blasting using a hybrid artificial neural network and particle swarm optimization , 2014 .

[22]  Aminaton Marto,et al.  Blasting-induced flyrock and ground vibration prediction through an expert artificial neural network based on particle swarm optimization , 2014, Arabian Journal of Geosciences.

[23]  Hiromichi Shiroma,et al.  Study on design and construction method for the New Tomei–Meishin expressway tunnels , 2003 .

[24]  Stefan Larsson,et al.  An artificial neural network based model to predict spatial soil type distribution using piezocone penetration test data (CPTu) , 2018, Bulletin of Engineering Geology and the Environment.

[25]  Li Wu,et al.  A fuzzy model for high-speed railway tunnel convergence prediction in weak rock , 2011 .

[26]  Binh Thai Pham,et al.  Prediction of shear strength of soft soil using machine learning methods , 2018, CATENA.

[27]  Pierpaolo Oreste,et al.  The Convergence-Confinement Method: Roles and Limits in Modern Geomechanical Tunnel Design , 2009 .

[28]  Cândida Ferreira,et al.  Gene Expression Programming: A New Adaptive Algorithm for Solving Problems , 2001, Complex Syst..

[29]  Dieu Tien Bui,et al.  Development of a Novel Hybrid Intelligence Approach for Landslide Spatial Prediction , 2019, Applied Sciences.

[30]  R. S. Sinha Underground structures : design and instrumentation , 1989 .

[31]  Johan Spross,et al.  Landslide susceptibility hazard map in southwest Sweden using artificial neural network , 2019 .

[32]  Liborio Cavaleri,et al.  Prediction of the Fundamental Period of Infilled RC Frame Structures Using Artificial Neural Networks , 2015, Comput. Intell. Neurosci..

[33]  P. G. Asteris,et al.  Application of artificial neural networks for the predictionof the compressive strength of cement-based mortars , 2019 .

[34]  Panagiotis G. Asteris,et al.  Prediction of self-compacting concrete strength using artificial neural networks , 2016 .

[35]  Jie Dou,et al.  A Comparative Study of PSO-ANN, GA-ANN, ICA-ANN, and ABC-ANN in Estimating the Heating Load of Buildings’ Energy Efficiency for Smart City Planning , 2019, Applied Sciences.

[36]  Cândida Ferreira,et al.  Gene Expression Programming: Mathematical Modeling by an Artificial Intelligence , 2014, Studies in Computational Intelligence.

[37]  Panagiotis G. Asteris,et al.  Soft computing-based techniques for concrete beams shear strength , 2019, Procedia Structural Integrity.

[38]  Aminaton Marto,et al.  Prediction of building damage induced by tunnelling through an optimized artificial neural network , 2019, Eng. Comput..

[39]  Satar Mahdevari,et al.  Prediction of tunnel convergence using Artificial Neural Networks , 2012 .

[40]  Panagiotis G. Asteris,et al.  Artificial bee colony-based neural network for the prediction of the fundamental period of infilled frame structures , 2019, Neural Computing and Applications.

[41]  Panagiotis G. Asteris,et al.  Surface treatment of tool steels against galling failure , 2018 .

[42]  Li Wu,et al.  Estimation of convergence of a high-speed railway tunnel in weak rocks using an adaptive neuro-fuzzy inference system (ANFIS) approach , 2012 .

[43]  Aminaton Marto,et al.  Simulation of blasting-induced air overpressure by means of artificial neural networks , 2012 .

[44]  Aydın Özsan,et al.  Site investigations and convergence measurements for a twin metro tunnel driven in Ankara clay, Turkey , 2006 .

[45]  Zhang,et al.  Quantitative Analysis of Soil Displacement Induced by Ground Loss and Shield Machine Mechanical Effect in Metro Tunnel Construction , 2019 .

[46]  Dieu Tien Bui,et al.  Hybrid computational intelligence models for groundwater potential mapping , 2019, CATENA.

[47]  Amin Mohebkhah,et al.  Stochastic Vulnerability Assessment of Masonry Structures: Concepts, Modeling and Restoration Aspects , 2019, Applied Sciences.

[48]  Liborio Cavaleri,et al.  Krill herd algorithm-based neural network in structural seismic reliability evaluation , 2019 .

[49]  Panagiotis G. Asteris,et al.  Self-compacting concrete strength prediction using surrogate models , 2017, Neural Computing and Applications.

[50]  Panagiotis G. Asteris,et al.  Feed-Forward Neural Network Prediction of the Mechanical Properties of Sandcrete Materials , 2017, Sensors.

[51]  E. Alonso,et al.  Application of the convergence-confinement method to tunnels in rock masses exhibiting Hoek–Brown strain-softening behaviour , 2010 .

[52]  Daniel Dias,et al.  Convergence-confinement approach for designing tunnel face reinforcement by horizontal bolting , 2011 .

[53]  Danial Jahed Armaghani,et al.  Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances , 2015, Engineering with Computers.