Reconfiguring and ramping-up ventilator production in the face of COVID-19: Can robots help?

As the COVID-19 pandemic expands, the shortening of medical equipment is swelling. A key piece of equipment getting far-out attention has been ventilators. The difference between supply and demand is substantial to be handled with normal production techniques, especially under social distancing measures in place. The study explores the rationale of human-robot teams to ramp up production using advantages of both the ease of integration and maintaining social distancing. The paper presents a model for faster integration of collaborative robots and design guidelines for workstations. The scenario is evaluated for an open source ventilator through continuous human-robot simulation and amplification of results in a discrete event simulation. One Sentence Summary Using robot-human teams for production ramp up to address the demand and maintain social distancing during COVID-19

[1]  John W. Fowler,et al.  How simulation modelling can help reduce the impact of COVID-19 , 2020, J. Simulation.

[2]  Maximo A. Roa,et al.  SMErobotics: Smart Robots for Flexible Manufacturing , 2019, IEEE Robotics & Automation Magazine.

[3]  Shimon Y. Nof,et al.  Springer Handbook of Automation , 2009, Handbook of Automation.

[4]  Tariq Masood,et al.  Virtual reality in manufacturing: immersive and collaborative artificial-reality in design of human-robot workspace , 2019, Int. J. Comput. Integr. Manuf..

[5]  Z. Memish,et al.  Covid-19 and community mitigation strategies in a pandemic , 2020, BMJ.

[6]  Mats Jackson,et al.  Factory-In-a-Box – Mobile Production Capacity on Demand , 2007 .

[7]  Ch. Srinivasa Rao,et al.  Development of modular manufacturing systems—a review , 2015 .

[8]  Erwin Rauch,et al.  A human-in-the-loop cyber-physical system for collaborative assembly in smart manufacturing , 2019, Procedia CIRP.

[9]  Marco Bortolini,et al.  Reconfigurable manufacturing systems: Literature review and research trend , 2018, Journal of Manufacturing Systems.

[10]  Laura M. Glass,et al.  Targeted Social Distancing Designs for Pandemic Influenza , 2006, Emerging infectious diseases.

[11]  Benoît Eynard,et al.  SME-oriented flexible design approach for robotic manufacturing systems , 2019, Journal of Manufacturing Systems.

[12]  Francesco Leali,et al.  Survey on human–robot collaboration in industrial settings: Safety, intuitive interfaces and applications , 2018, Mechatronics.

[13]  Konstantinos Salonitis.  Modular design for increasing assembly automation , 2014 .

[14]  Alexander Verl,et al.  Cooperation of human and machines in assembly lines , 2009 .

[15]  Kevin Kelly,et al.  Framework for Assessing Robotic Dexterity within Flexible Manufacturing , 2017, J. Intell. Robotic Syst..

[16]  Jiafan Zhang,et al.  Challenges and key technologies in robotic cell layout design and optimization , 2017 .

[17]  Christopher D. Wickens,et al.  Humans: Still Vital After All These Years of Automation , 2008, Hum. Factors.

[18]  John Ahmet Erkoyuncu,et al.  Enterprise systems’ life cycle in pursuit of resilient smart factory for emerging aircraft industry: a synthesis of Critical Success Factors’(CSFs), theory, knowledge gaps, and implications , 2018, Enterp. Inf. Syst..

[19]  Arne Bilberg,et al.  Framework to Implement Collaborative Robots in Manual Assembly: A Lean Automation Approach , 2017 .

[20]  Richard H. Weston,et al.  A computer integrated unified modelling approach to responsive manufacturing , 2010 .

[21]  Arne Bilberg,et al.  Digital twin driven human–robot collaborative assembly , 2019, CIRP Annals.

[22]  Robert X. Gao,et al.  Symbiotic human-robot collaborative assembly , 2019, CIRP Annals.

[23]  Dorota Stadnicka,et al.  Multiple System Dynamics and Discrete Event Simulation for manufacturing system performance evaluation , 2018 .

[24]  M. Nishimura,et al.  Critical Care Bed Capacity in Asian Countries and Regions , 2020, Critical care medicine.

[25]  Yoram Koren,et al.  Reconfigurable manufacturing systems: Principles, design, and future trends , 2017, Frontiers of Mechanical Engineering.

[26]  Zude Zhou,et al.  Digital twin-based industrial cloud robotics: Framework, control approach and implementation , 2020 .

[27]  Arne Bilberg,et al.  Complexity-based task allocation in human-robot collaborative assembly , 2019, Ind. Robot.

[28]  Jochen Deuse,et al.  Development of a sociotechnical planning system for human-robot interaction in assembly systems focusing on small and medium-sized enterprises , 2019, Procedia CIRP.

[29]  Alfonso J. Rodriguez-Morales,et al.  Coronavirus Disease 2019–COVID-19 , 2020, Clinical Microbiology Reviews.

[30]  Robert Harrison,et al.  Product to process lifecycle management in assembly automation systems , 2011 .

[31]  Richard H. Weston,et al.  An integrated modelling approach in support of next generation reconfigurable manufacturing systems , 2011, Int. J. Comput. Aided Eng. Technol..

[32]  Nancy M. Amato,et al.  A Roadmap for US Robotics - From Internet to Robotics 2020 Edition , 2021, Found. Trends Robotics.

[33]  Wenjun Xu,et al.  A function block based cyber-physical production system for physical human–robot interaction , 2018, Journal of Manufacturing Systems.

[34]  László Monostori,et al.  Capacity management of modular assembly systems , 2017 .

[35]  Eli P. Fenichel,et al.  Economic considerations for social distancing and behavioral based policies during an epidemic. , 2013, Journal of health economics.

[36]  Hoda A. ElMaraghy,et al.  Smart Adaptable Assembly Systems , 2016 .

[37]  Elisabeth Mahase,et al.  Covid-19: UK starts social distancing after new model points to 260 000 potential deaths , 2020, BMJ.

[38]  Tariq Masood,et al.  Industry 4.0: Adoption challenges and benefits for SMEs , 2020, Comput. Ind..

[39]  Ana Paiva,et al.  “I Choose... YOU!” Membership preferences in human–robot teams , 2018, Autonomous Robots.

[40]  Ole Madsen,et al.  Designing modular manufacturing systems using mass customisation theories and methods , 2012 .

[41]  Tariq Masood,et al.  Characteristics of changeable systems across value chains , 2020 .

[42]  Hans-Peter Wiendahl,et al.  Handbook Factory Planning and Design , 2015 .

[43]  Robert L Chatburn,et al.  Understanding mechanical ventilators , 2010, Expert review of respiratory medicine.

[44]  D. Holdstock.  Past, present--and future? , 2005, Medicine, conflict, and survival.

[45]  Sotiris Makris,et al.  On a human–robot workplace design and task allocation system , 2017, Int. J. Comput. Integr. Manuf..

[46]  P. Ferdinande,et al.  The variability of critical care bed numbers in Europe , 2012, Intensive Care Medicine.

[47]  Konrad Wegener,et al.  Optimizing human–robot task allocation using a simulation tool based on standardized work descriptions , 2020, J. Intell. Manuf..

[48]  Jeffrey Too Chuan Tan,et al.  Collaboration Planning by Task Analysis in Human-Robot Collaborative Manufacturing System , 2010 .

[49]  Arne Bilberg,et al.  Advances in machine vision for flexible feeding of assembly parts , 2019 .

[50]  Yoram Koren,et al.  Design of reconfigurable manufacturing systems , 2010 .

[51]  Robert M Kacmarek,et al.  The Mechanical Ventilator: Past, Present, and Future , 2011, Respiratory Care.

[52]  Federico Vicentini,et al.  Collaborative Robotics: A Survey , 2020 .

[53]  Florian Jentsch,et al.  Building Appropriate Trust in Human-Robot Teams , 2013, AAAI Spring Symposium: Trust and Autonomous Systems.

[54]  G. Thomson.  COVID‐19: Social distancing, ACE 2 receptors, protease inhibitors and beyond? , 2020, International journal of clinical practice.

[55]  J. Hageman.  The Coronavirus Disease 2019 (COVID-19). , 2020, Pediatric annals.

[56]  Sudha R. Raman,et al.  Early reflection on the global impact of COVID19, and implications for physiotherapy , 2020, Physiotherapy.

[57]  Åsa Fast-Berglund,et al.  Development of virtual reality support to factory layout planning , 2019, International Journal on Interactive Design and Manufacturing (IJIDeM).

[58]  Robert Bogue.  What future for humans in assembly , 2014 .

[59]  Ana Paiva,et al.  Membership Preferences in Human-Robot Teams , 2019 .

[60]  Maurizio Faccio,et al.  Collaborative and traditional robotic assembly: a comparison model , 2019, The International Journal of Advanced Manufacturing Technology.

[61]  Juhani Heilala,et al.  Modular reconfigurable flexible final assembly systems , 2001 .

[62]  Svilen Dimitrov,et al.  Hybrid Teams of Humans, Robots, and Virtual Agents in a Production Setting , 2016, 2016 12th International Conference on Intelligent Environments (IE).

[63]  S. Collins,et al.  Anesthesia and critical care ventilator modes: past, present, and future. , 2014, AANA journal.

[64]  T. Masood,et al.  Augmented reality in support of Industry 4.0 - Implementation challenges and success factors , 2019, Robotics Comput. Integr. Manuf..

[65]  A. H. Redford,et al.  Generic flexible assembly system design , 2002 .