Silicon Micro-probe Card Using Porous Silicon Micromachining Technology

We present a new type of silicon micro-probe card using a three-dimensional probe beam of the cantilever type. It was fabricated using KOH and dry etching, a porous silicon micromachining technique, and an Au electroplating process. The cantilever-type probe beam had a thickness of 5 μm, a width of 50 μm, and a length of 800 μm. The probe beam for pad contact was formed by the thermal expansion coefficient difference between the films. The maximum height of the curled probe beam was 170 pm, and an annealing process was performed for 20 min at 500°C. The contact resistance of the newly fabricated probe card was less than 2 Ω, and its lifetime was more than 20,000 turns.

[1]  Dong-il Cho,et al.  A novel MEMS silicon probe card , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[2]  Dan Higgins,et al.  P4 probe card-a solution for at-speed, high density, wafer probing , 1998, Proceedings International Test Conference 1998 (IEEE Cat. No.98CH36270).

[3]  T. Itoh,et al.  Low contact-force and compliant MEMS probe card utilizing fritting contact , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[4]  R. B. Marcus,et al.  Thermally actuated microprobes for a new wafer probe card , 1999 .

[5]  M. Zargari,et al.  Active substrate membrane probe card , 1995, Proceedings of International Electron Devices Meeting.

[6]  Young-Min Kim,et al.  Characteristics of cantilever beam fabricated by silicon micromachining for flow sensor application , 2003, Proceedings of IEEE Sensors 2003 (IEEE Cat. No.03CH37498).

[7]  C. Barsotti,et al.  Very high density probing , 1988, International Test Conference 1988 Proceeding@m_New Frontiers in Testing.

[8]  Jong-Hyun Lee,et al.  Fabrication of a Silicon Micro-Probe for Vertical Probe Card Application , 1998, Digest of Papers. Microprocesses and Nanotechnology'98. 198 International Microprocesses and Nanotechnology Conference (Cat. No.98EX135).

[9]  Kazuo Kato,et al.  Probe card with probe pins grown by the vapor-liquid-solid (VLS) method , 1996 .

[10]  M. Beiley,et al.  A micromachined array probe card-fabrication process , 1995 .

[11]  M. Ueda,et al.  A fine pitch probe technology for VLSI wafer testing , 1990, Proceedings. International Test Conference 1990.

[12]  Jong-Hyun Lee,et al.  Characterization of an Oxidized Porous Silicon Layer by Complex Process Using RTO and the Fabrication of CPW-Type Stubs on an OPSL for RF Application , 2004 .