Zinc basic benzoate as eco-friendly steel corrosion inhibitor pigment for anticorrosive epoxy-coatings

Abstract The inhibitive properties of benzoate anion were known from many years ago but the employment of soluble compounds in anticorrosive paints is limited because their lixiviation would greatly increase coating permeability. However, it is possible to prepare insoluble metallic benzoates with certain cations. This paper describes the experimental procedure to prepare zinc basic benzoate to be employed in anticorrosive paints. The anticorrosive properties of zinc basic benzoate were assessed by electrochemical techniques (corrosion potential and linear polarization measurements). The nature of the compounds forming the protective layer was determined by different techniques, including spectroscopic ones. In a second stage, the anticorrosive properties of the pigment were evaluated by incorporating it in epoxy anticorrosive paints which, in turn, were evaluated by accelerated (salt spray and humidity tests) and electrochemical measurements (electrochemical impedance spectroscopy). The morphology and the nature of the protective layer grown under the paint film in the salt spray chamber was assessed by scanning electron microscopy (SEM) and UV–vis diffuse reflectance spectroscopy. Experimental results showed that basic zinc benzoate was adequate to formulate epoxy anticorrosive paints with improved anticorrosive performance, especially with the water-borne binder.

[1]  T. Szauer Impedance measurements for the evaluation of protective nonmetallic coatings , 1982 .

[2]  I. Chet,et al.  Repulsion of bacteria from marine surfaces. , 1975, Applied microbiology.

[3]  C. Monticelli,et al.  A study on corrosion inhibitors for concrete application , 2000 .

[4]  D. Landolt,et al.  Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steel , 2002 .

[5]  M. Ergun,et al.  Pitting potential and protection potential of carbon steel for chloride ion and the effectiveness of different inhibiting anions , 1991 .

[6]  Mónica García,et al.  Non-toxic alternative compounds for marine antifouling paints , 2003 .

[7]  K. Aramaki Effects of organic inhibitors on corrosion of zinc in an aerated 0.5 M NaCl solution , 2001 .

[8]  G. Blustein,et al.  Inhibition of steel corrosion by calcium benzoate adsorption in nitrate solutions: theoretical and experimental approaches , 2004 .

[9]  R. Kahraman,et al.  A study of corrosion control of carbon steel using inhibitors in a simulated environment , 2002 .

[10]  A. Bittner Advanced phosphate anticorrosive pigments for compliant primers , 1989 .

[11]  Daniel C. Harris,et al.  Quantitative Chemical Analysis , 1968, Nature.

[12]  B. Amo,et al.  Three generations of inorganic phosphates in solvent and water-borne paints: A synergism case , 2005 .

[13]  J. Mankowski,et al.  Cathodic inhibition of the corrosion of mild steel in phosphate, tungstate, arsenate and silicate solutions containing Ca2+ions , 1969 .

[14]  O. Ferraz,et al.  Characterization of protective properties for some naval steel / polymeric coating / 3% nacl solution systems by eis and visual assessment , 1995 .

[15]  H. Nishihara,et al.  The inhibition of passive film breakdown on iron in a borate buffer solution containing chloride ions by organic anion inhibitors , 1994 .

[16]  T. Szauer Electrical and electrochemical resistances for the evaluation of protective nonmetallic coatings , 1982 .

[17]  D. Landolt,et al.  Adsorption of organic corrosion inhibitors on iron in the active and passive state. A replacement reaction between inhibitor and water studied with the rotating quartz crystal microbalance , 2001 .

[18]  James M. Gaidis,et al.  Chemistry of corrosion inhibitors , 2004 .

[19]  G. Larramona,et al.  The Passive Film on Iron at pH 1–14 A Potential‐Modulated Reflectance Study , 1989 .

[20]  A. R. Di Sarli,et al.  The influence of the method of application of the paint on the corrosion of the substrate as assessed by ASTM and electrochemical method , 1998 .

[21]  P. Seré,et al.  Evaluation of the surface treatment effect on the corrosion performance of paint coated carbon steel , 1998 .

[22]  Q. Slaiman,et al.  Mechanism of the corrosion inhibition of iron by sodium benzoate—III. The role of oxygen , 1973 .

[23]  Werner Stumm,et al.  The reactivity of Fe(III) (hydr)oxides : effects of ligands in inhibiting the dissolution , 1993 .

[24]  R. Kahraman Inhibition of atmospheric corrosion of mild steel by sodium benzoate treatment , 2002 .

[25]  C. Piatnicki,et al.  Electrochemical behaviour of iron in neutral solutions of acetate and benzoate anions , 1999 .

[26]  Q. Slaiman,et al.  Mechanism of the corrosion inhibition of Fe by sodium benzoate—I. The influence of concentration and pH in air-saturated solutions of sodium benzoate , 1971 .

[27]  H. Leidheiser Electrical and electrochemical measurements as predictors of corrosion at the metal—organic coating interface , 1979 .

[28]  R. Kahraman,et al.  Effect of inhibitor treatment on corrosion of steel in a salt solution , 2003 .

[29]  J. C. Scully,et al.  The function of the repassivation process in the inhibition of pitting corrosion on aluminium , 1980 .

[30]  A. Kalendová Methods for testing and evaluating the flash corrosion , 2002 .

[31]  H. Flitt,et al.  The effect of potential scan rate on the parameters used to synthesize anodic polarization curves , 1992 .

[32]  G. Blustein,et al.  Inhibition of steel corrosion by calcium benzoate adsorption in nitrate solutions: theoretical and experimental approaches. , 2005, Journal of colloid and interface science.

[33]  D. Landolt,et al.  Effect of anions on the efficiency of aromatic carboxylic acid corrosion inhibitors in near neutral media: Experimental investigation and theoretical modeling , 1998 .

[34]  W. Brushwell Water-borne coatings , 1984 .

[35]  J. Bardwell,et al.  Mechanism of anodic dissolution and passivation of iron—II. Comparison of the behavior in neutral benzoate and acetate buffer solutions , 1992 .

[36]  C. Elsner,et al.  Comparison between electrochemical impedance and salt spray tests in evaluating the barrier effect of epoxy paints , 1994 .