Space Vector Modulation for a 4-Leg Matrix Converter

This paper describes the design of space vector modulation strategy for a 4-leg matrix converter. In the chosen modulation technique the input and output current/voltage spaces are used separately to allow control over both the output voltage and input current. The paper presents results verifying the operation of the space vector modulation technique

[1]  Luca Zarri,et al.  Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state , 2002, IEEE Trans. Ind. Electron..

[2]  D. Borojevic,et al.  Space vector modulated three-phase to three-phase matrix converter with input power factor correction , 1995 .

[3]  Zhao Yu,et al.  A three-phase four-line soft switched inverter for UPS applications , 1992, [1992] Proceedings of the IEEE International Symposium on Industrial Electronics.

[4]  Domenico Casadei,et al.  Reduction of the input current harmonic content in matrix converters under input/output unbalance , 1998, IEEE Trans. Ind. Electron..

[5]  Frequency-Changer Systems Using the Cycloconverter Principle , 1963, IEEE Transactions on Applications and Industry.

[6]  P.W. Wheeler,et al.  A Novel Four-leg Matrix Converter , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[7]  D. Borojevic,et al.  Analysis and comparison of space vector modulation schemes for a four-leg voltage source inverter , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[8]  P.W. Wheeler,et al.  Indirect Space Vector Modulation for a 4-Leg Matrix Converter , 2007, 2007 IEEE Power Electronics Specialists Conference.

[9]  P.W. Wheeler,et al.  A new control method of single-stage 4-leg matrix converter , 2007, 2007 European Conference on Power Electronics and Applications.

[10]  F. Blaabjerg,et al.  A new modulation method for matrix converters , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[11]  D. Boroyevich,et al.  A three-phase inverter with a neutral leg with space vector modulation , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[12]  M.P. Kazmierkowski,et al.  PWM voltage and current control of four-leg VSI , 1998, IEEE International Symposium on Industrial Electronics. Proceedings. ISIE'98 (Cat. No.98TH8357).

[13]  A. Alesina,et al.  Intrinsic amplitude limits and optimum design of 9-switches direct PWM AC-AC converters , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[14]  Thomas A. Lipo,et al.  New control strategy for matrix converter , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[15]  P.W. Wheeler,et al.  A Utility Power Supply Based on a Four-Output Leg Matrix Converter , 2008, IEEE Transactions on Industry Applications.

[16]  Pericle Zanchetta,et al.  A three-phase utility power supply based on the matrix converter , 2004 .

[17]  Robert D. Lorenz,et al.  Modeling of multileg sine-wave inverters: a geometric approach , 1999, IEEE Trans. Ind. Electron..

[18]  R.W. De Doncker,et al.  Decoupled control of a 4-leg inverter via a new 4/spl times/4 transformation matrix , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[19]  Sangshin Kwak,et al.  Four-leg based Matrix Converter with Fault Resilient Structures and Controls for Electric Vehicle and Propulsion Systems , 2007, 2007 IEEE Vehicle Power and Propulsion Conference.

[20]  Dushan Boroyevich,et al.  Three-dimensional space vector modulation for four-leg voltage-source converters , 2002 .

[21]  Lee Empringham,et al.  Intelligent commutation of matrix converter bi-directional switch cells using novel gate drive techniques , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[22]  Robert D. Lorenz,et al.  Decoupled control of a four-leg inverter via a new 4/spl times/4 transformation matrix , 2001 .

[23]  D. Borojevic,et al.  Space vector modulation with unity input power factor for forced commutated cycloconverters , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[24]  A. Alesina,et al.  Analysis and design of optimum-amplitude nine-switch direct AC-AC converters , 1989 .

[25]  Thomas A. Lipo,et al.  A new space vector modulation strategy for common mode voltage reduction [in PWM invertors] , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[26]  M. Venturini,et al.  Solid-state power conversion: A Fourier analysis approach to generalized transformer synthesis , 1981 .

[27]  R. Hagmann,et al.  AC-cycloconverter drives for cold and hot rolling mill applications , 1991, Conference Record of the 1991 IEEE Industry Applications Society Annual Meeting.

[28]  L. Huber,et al.  Space vector modulator for forced commutated cycloconverters , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[29]  T.A. Lipo,et al.  A novel matrix converter topology with simple commutation , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[30]  C. D. Manning,et al.  Transformerless four-wire PWM rectifier and its application in AC-DC-AC converters , 1995 .

[31]  W. Hofmann,et al.  Digital control of a four leg inverter for standalone photovoltaic systems with unbalanced load , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[32]  L. J. Lawson,et al.  The Practical Cycloconverter , 1968 .

[33]  Seung-Ki Sul,et al.  A carrier-based PWM method for three-phase four-leg voltage source converters , 2004, IEEE Transactions on Power Electronics.