Energy and exergy analyses of a mixed fuel-fired grate–kiln for iron ore pellet induration

Abstract Many models of iron ore pellet induration have been developed on the basis of the first law of thermodynamics. However, the exergy analysis, well grounded on the first and second law, of the process is rare. Therefore, exergy balance test was systematically carried out on a grate–kiln, and energy and exergy analyses have been conducted to investigate irreversibility of the process. A model of iron oxide pellet exergy (IOPEM) is presented according to oxidation kinetic characteristics. It is found that the maximum effect (−6.8%) of the characteristics on the pellet exergy appears in the raised end of the kiln. The exergy efficiency of the system is determined to be 10.7% whereas its energy efficiency 59.9%, indicating a great potential for energy-saving improvements. The exergy analysis reveals exergy destruction ratio of kiln and cooler is 14.1%, and 7.7% respectively, and the largest exergy destruction (74.2%) results from the grate. No violent effect of reference environment temperature on exergy efficiency of major components is observed, indicating the grate is the major source of irreversibility. In a word, this study provides a better understanding of the energy and exergy flows of iron ore pellet induration in the grate–kiln and helps to economize energy.

[1]  Yi Zhang,et al.  Micro-analysis of high-temperature oxidation-resistance of a new kind of heat-resistant grid plate in grate-kiln , 2009 .

[2]  James Manuel,et al.  Thermal Implications of Phase Transformations during Induration of Iron Ore Pellets Produced from Hematite , 2005 .

[3]  Mark Cross,et al.  GASFLO—Airflow distribution evaluation software tool for ducting systems of pellet induration processes , 1994 .

[4]  Christopher J. Koroneos,et al.  Exergy analysis of renewable energy sources , 2003 .

[5]  A. K. Slone,et al.  CFD analysis of an induration cooler on an iron ore grate-kiln pelletising process , 2009 .

[6]  Daniel Hodouin,et al.  On the drying rates of individual iron oxide pellets , 2007 .

[7]  N. S. Sundarmurti,et al.  Thermal Conductivity and Diffusivity of Iron Ore Pellet Having Low Porosity , 2002 .

[8]  J. A. Thurlby,et al.  Energy cost minimization in grate/kiln induration , 1988 .

[9]  J. A. Thurlby.  Gas flow and pressure balancing in modeling grate/kiln induration , 1988 .

[10]  J. A. Thurlby.  A dynamic mathematical model of the complete grate/kiln iron–ore pellet induration process , 1988 .

[11]  Jules Thibault,et al.  Modelling of a Pilot Scale Iron Ore Pellet Induration Furnace , 1994 .

[12]  R. J. Batterham.  Modeling the development of strength in pellets , 1986 .

[13]  Éric Poulin,et al.  A procedure for the design and evaluation of decentralised and model-based predictive multivariable controllers for a pellet cooling process , 2003, Comput. Chem. Eng..

[14]  Taiji Nishizawa,et al.  Thermodynamics of Microstructures , 2008 .

[15]  Jan Szargut,et al.  Exergy Analysis of Thermal, Chemical, and Metallurgical Processes , 1988 .

[16]  Bo Björkman,et al.  Mechanisms in oxidation and sintering of magnetite iron ore green pellets , 2008 .

[17]  Ünal Çamdali,et al.  Energy and exergy analyses in a rotary burner with pre-calcinations in cement production , 2004 .

[18]  M. W. Chase.  NIST-JANAF thermochemical tables , 1998 .

[19]  Srinivas Dwarapudi,et al.  Prediction of Iron Ore Pellet Strength Using Artificial Neural Network Model , 2007 .