Precipitation mechanism and microstructural evolution of Al2O3/ZrO2(CeO2) solid solution powders consolidated by spark plasma sintering

[1]  Yongting Zheng,et al.  Microstructural evolution of supra‐nanostructure Al 2 O 3 /ZrO 2 eutectic powders by combustion synthesis‐spray cooling , 2019, Journal of the American Ceramic Society.

[2]  Yongting Zheng,et al.  Combustion synthesis assisted water atomization-solid solution precipitation: A new guidance for nano-ZTA ceramics , 2019, Journal of the European Ceramic Society.

[3]  Yongting Zheng,et al.  The reaction mechanism analysis and mechanical properties of large-size Al2O3/ZrO2 eutectic ceramics prepared by a novel combustion synthesis , 2018, Ceramics International.

[4]  Zhi-Peng Xie,et al.  A novel approach to improve flexural strength of Al2O3‐20 wt% ZrO2 composites by oscillatory pressure sintering , 2018 .

[5]  Haidong Wu,et al.  Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method , 2018 .

[6]  R. Krüger,et al.  The effect of microstructure and chromia content on the properties of zirconia toughened alumina , 2018 .

[7]  Zhi-Peng Xie,et al.  Microstructure and mechanical properties of ZTA composites fabricated by oscillatory pressure sintering , 2018 .

[8]  M. Hoque,et al.  Effect of MgO on the physical, mechanical and microstructural properties of ZTA-TiO2 composites , 2017 .

[9]  E. C. Abdullah,et al.  Microwave sintering of zirconia-toughened alumina (ZTA)-TiO2-Cr2O3 ceramic composite: The effects on microstructure and properties , 2017 .

[10]  Anze Shui,et al.  Investigation on the preparation and properties of monodispersed Al2O3ZrO2 nanopowder via Co-precipitation method , 2016 .

[11]  W. Han,et al.  ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders , 2016 .

[12]  Haiyan Du,et al.  Fine grained Al2O3–ZrO2 (Y2O3) ceramics by controlled crystallization of amorphous phase , 2016 .

[13]  H. Yan,et al.  Toughening of zirconia/alumina composites by the addition of graphene platelets , 2012 .

[14]  K. Kakegawa,et al.  HR-TEM and FIB-SEM characterization of formation of eutectic-like structure from amorphous GdAlO3−Al2O3 system , 2012 .

[15]  Guanghua Liu,et al.  Controlled amorphous crystallization: An easy way to make transparent nanoceramics , 2012 .

[16]  Cheng Liu,et al.  Densification and mechanical properties of fine-grained Al2O3–ZrO2 composites consolidated by spark plasma sintering , 2012 .

[17]  H. Nersisyan,et al.  Preparation of zirconium-based ceramic and composite fine-grained powders , 2012 .

[18]  Guanghua Liu,et al.  Fabrication of transparent LaAlO3/t-ZrO2 nanoceramics through controlled amorphous crystallization , 2011 .

[19]  C. Bindal,et al.  An evaluation of Al2O3-ZrO2 composites produced by coprecipitation method , 2011 .

[20]  A. Mukhopadhyay,et al.  Achieving uniform microstructure and superior mechanical properties in ultrafine grained TiB2–TiSi2 composites using innovative multi stage spark plasma sintering , 2010 .

[21]  Y. Han,et al.  Eutectic structure from amorphous Al2O3-ZrO2-Y2O3 system by rapid quenching technique for potential hybrid solar cell application , 2010 .

[22]  Antonio Mario Locci,et al.  Consolidation via spark plasma sintering of HfB2/SiC and HfB2/HfC/SiC composite powders obtained by self-propagating high-temperature synthesis , 2009 .

[23]  W. Tian,et al.  Reinforcing and toughening alumina/titania ceramic composites with nano-dopants from nanostructured composite powders , 2009 .

[24]  T. Kojima,et al.  Formation of ultrafine eutectic-like microstructures of various rare earth oxide-Al_2O_3 systems by use of amorphous phases , 2008 .

[25]  J. Binner,et al.  Processing of bulk nanostructured ceramics , 2008 .

[26]  Bala Vaidhyanathan,et al.  Dense nanostructured zirconia by two stage conventional/hybrid microwave sintering , 2008 .

[27]  Jose Ygnacio Pastor,et al.  Alumina/Zirconia Micro/Nanocomposites: A New Material for Biomedical Applications With Superior Sliding Wear Resistance , 2007 .

[28]  M. Chu,et al.  Influence of ZrO2 on the thermo-mechanical response of nano-ZTA , 2007 .

[29]  D. Sarkar,et al.  Preparation and characterization of an Al2O3–ZrO2 nanocomposite, Part I: Powder synthesis and transformation behavior during fracture , 2007 .

[30]  S. Kim,et al.  High-Frequency Induction Heat Sintering of Mechanically Alloyed Alumina–Yttria-Stabilized Zirconia Nano-Bioceramics , 2006 .

[31]  B. Jang.  Microstructure of nano SiC dispersed Al2O3–ZrO2 composites , 2005 .

[32]  B. Kear,et al.  Metastable Phase Formation in Plasma‐Sprayed ZrO2 (Y2O3)–Al2O3 , 2003 .

[33]  R. Torrecillas,et al.  Alumina nanocomposites from powder–alkoxide mixtures , 2002 .

[34]  Jingkun Guo,et al.  Fabrication and microstructure of Al2O3–ZrO2(3Y)–SiC nanocomposites , 1999 .