An in situ dual-modification strategy for O3-NaNi1/3Fe1/3Mn1/3O2 towards high-performance sodium-ion batteries

The V-modified NFM that couples broader Na+ diffusion layer with interface shielding is successfully in situ synthesized to exhibit a high rate capacity and excellent cycling stability with 75.8% capacity retention for 500 cycles for SIBs.

[1]  Xiaobo Ji,et al.  Novel Nonstoichiometric Niobium Oxide Anode Material with Rich Oxygen Vacancies for Advanced Lithium-Ion Capacitors. , 2023, ACS applied materials & interfaces.

[2]  J. Marco,et al.  High-Voltage Stabilization of O3-Type Layered Oxide for Sodium-Ion Batteries by Simultaneous Tin Dual Modification , 2022, Chemistry of materials : a publication of the American Chemical Society.

[3]  Qi Liu,et al.  Unblocking Oxygen Charge Compensation for Stabilized High‐Voltage Structure in P2‐Type Sodium‐Ion Cathode , 2022, Advanced science.

[4]  Xiaobo Ji,et al.  Crack-free single-crystalline Co-free Ni-rich LiNi0.95Mn0.05O2 layered cathode , 2022, eScience.

[5]  J. Xie,et al.  Atomical Reconstruction and Cationic Reordering for Nickel‐Rich Layered Cathodes , 2022, Advanced Energy Materials.

[6]  Hui-Xia Zhao,et al.  Unraveling Anionic Redox for Sodium Layered Oxide Cathodes: Breakthroughs and Perspectives , 2021, Advanced materials.

[7]  Jianxing Shen,et al.  Sodium superionic conductor NaTi2(PO4)3 surface layer modified P2-type Na2/3Ni1/3Mn2/3O2 as high-performance cathode for sodium-ion batteries , 2021 .

[8]  I. Belharouak,et al.  Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials , 2021 .

[9]  Xiangfeng Liu,et al.  Revealing the anionic redox chemistry in O3-type layered oxide cathode for sodium-ion batteries , 2021 .

[10]  Chenglong Zhao,et al.  Rational design of layered oxide materials for sodium-ion batteries , 2020, Science.

[11]  Guofeng Jia,et al.  Improved High Rate Performance and Cycle Performance of Al-Doped O3-Type NaNi0.5Mn0.5O2 Cathode Materials for Sodium-Ion Batteries , 2020 .

[12]  K. Chung,et al.  Multiple effects of Mg1–xNixO coating on P2-type Na0.67Ni0.33Mn0.67O2 to generate highly stable cathodes for sodium-ion batteries , 2020 .

[13]  Changyu Shen,et al.  PAANa-induced ductile SEI of bare micro-sized FeS enables high sodium-ion storage performance , 2020, Science China Materials.

[14]  J. Tarascon.  Na-ion versus Li-ion Batteries: Complementarity Rather than Competitiveness , 2020, Joule.

[15]  Xiaoping Yang,et al.  Ionic‐Conducting and Robust Multilayered Solid Electrolyte Interphases for Greatly Improved Rate and Cycling Capabilities of Sodium Ion Full Cells , 2020, Advanced Energy Materials.

[16]  Yong Yang,et al.  Highly-stable P2–Na0.67MnO2 electrode enabled by lattice tailoring and surface engineering , 2020 .

[17]  Xiangfeng Liu,et al.  Understanding the Multiple Effects of TiO2 Coating on NaMn0.33Fe0.33Ni0.33O2 Cathode Material for Na-Ion Batteries , 2020, ACS Applied Energy Materials.

[18]  Yong Yang,et al.  P2-Na0.67AlxMn1-xO2: cost-effective, stable and high-rate sodium electrodes by suppressing phase transitions and enhancing Na+ mobility. , 2019, Angewandte Chemie.

[19]  Zhongwei Chen,et al.  An ion conductive polyimide encapsulation: New insight and significant performance enhancement of sodium based P2 layered cathodes , 2019, Energy Storage Materials.

[20]  W. Yoon,et al.  O3-type NaNi1/3Fe1/3Mn1/3O2 layered cathode for Na-ion batteries: Structural evolution and redox mechanism upon Na (de) intercalation , 2019, Journal of Power Sources.

[21]  Sreekumar Kurungot,et al.  Dendrite Growth Suppression by Zn 2+ ‐Integrated Nafion Ionomer Membranes: Beyond Porous Separators toward Aqueous Zn/V 2 O 5 Batteries with Extended Cycle Life , 2019, Energy Technology.

[22]  Ya‐Xia Yin,et al.  Suppression of Monoclinic Phase Transitions of O3-Type Cathodes Based on Electronic Delocalization for Na-Ion Batteries. , 2019, ACS applied materials & interfaces.

[23]  Huiling Zhao,et al.  One-Step Integrated Surface Modification To Build a Stable Interface on High-Voltage Cathode for Lithium-Ion Batteries. , 2019, ACS applied materials & interfaces.

[24]  Yan Yu,et al.  High-Safety Nonaqueous Electrolytes and Interphases for Sodium-Ion Batteries. , 2019, Small.

[25]  R. Hu,et al.  Co-Substitution Enhances the Rate Capability and Stabilizes the Cyclic Performance of O3-Type Cathode NaNi0.45- xMn0.25Ti0.3Co xO2 for Sodium-Ion Storage at High Voltage. , 2019, ACS applied materials & interfaces.

[26]  H. Xin,et al.  Deciphering the Cathode–Electrolyte Interfacial Chemistry in Sodium Layered Cathode Materials , 2018, Advanced Energy Materials.

[27]  Junhua Song,et al.  Interphases in Sodium‐Ion Batteries , 2018 .

[28]  Zonghai Chen,et al.  Insight into Ca-Substitution Effects on O3-Type NaNi1/3 Fe1/3 Mn1/3 O2 Cathode Materials for Sodium-Ion Batteries Application. , 2018, Small.

[29]  J. Tarascon,et al.  A Chemical Approach to Raise Cell Voltage and Suppress Phase Transition in O3 Sodium Layered Oxide Electrodes , 2018 .

[30]  Yu-Guo Guo,et al.  Layered Oxide Cathodes for Sodium‐Ion Batteries: Phase Transition, Air Stability, and Performance , 2018 .

[31]  Prasant Kumar Nayak,et al.  From Lithium-Ion to Sodium-Ion Batteries: Advantages, Challenges, and Surprises. , 2018, Angewandte Chemie.

[32]  Ya‐Xia Yin,et al.  Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries. , 2017, Journal of the American Chemical Society.

[33]  Chongwu Zhou,et al.  Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: The capacity decay mechanism and Al2O3 surface modification , 2016 .

[34]  Chenglong Zhao,et al.  Sodium‐Deficient O3‐Na0.9[Ni0.4Mn xTi0.6−x]O2 Layered‐Oxide Cathode Materials for Sodium‐Ion Batteries , 2016 .

[35]  Kai Zhang,et al.  Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries , 2015, Advanced materials.

[36]  Ilias Belharouak,et al.  Radially aligned hierarchical columnar structure as a cathode material for high energy density sodium-ion batteries , 2015, Nature Communications.

[37]  Zi‐Feng Ma,et al.  Large-Scale Synthesis of NaNi1/3Fe1/3Mn1/3O2 as High Performance Cathode Materials for Sodium Ion Batteries , 2016 .

[38]  Donghan Kim,et al.  Layered Na[Ni1/3Fe1/3Mn1/3]O2 cathodes for Na-ion battery application , 2012 .