A numerical study of latent thermal energy storage in a phase change material/carbon panel

To reduce the energetic dependence of building, it has become necessary to explore and develop new materials promoting energy conservation. Because of their high storage capacity, phase change materials (PCMs) are efficient to store thermal energy. In this paper, a 3D model was studied for simulation of energy storing cycles to predict the performances of PCM loaded panels. Carbon was used as supporting material for the PCM. The simulation was based on the enthalpy method using Ansys Fluent software. The panel was exposed to a daily heat flow including the effects of convection and radiation. The results show that the temperature decreased of approximately 2.5°C with a time shift about 2 hours. The steady state was reached after four cycles. Thus, after four cycles the PCM showed its effects on the temperature conditioning.

[1]  Frédéric Kuznik,et al.  Numerical study of the influence of the convective heat transfer on the dynamical behaviour of a phase change material wall , 2011 .

[2]  A. Bontemps,et al.  Experimental and modelling study of twin cells with latent heat storage walls , 2011 .

[3]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[4]  Yvan Dutil,et al.  A review on phase-change materials: Mathematical modeling and simulations , 2011 .

[5]  R. K. Sharma,et al.  Developments in organic solid–liquid phase change materials and their applications in thermal energy storage , 2015 .

[6]  Shuli Liu,et al.  A work procedure of utilising PCMs as thermal storage systems based on air-TES systems , 2014 .

[7]  Halime Ö Paksoy,et al.  Thermal energy storage for sustainable energy consumption : fundamentals, case studies and design , 2006 .

[8]  X. Py,et al.  Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material , 2001 .

[9]  Luigi Marletta,et al.  A methodology for investigating the effectiveness of PCM wallboards for summer thermal comfort in buildings , 2013 .

[10]  L. Drzal,et al.  High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets , 2009 .

[11]  Alparslan Oztekin,et al.  Effect of internal void placement on the heat transfer performance – Encapsulated phase change material for energy storage , 2015 .

[12]  Kamal Abdel Radi Ismail,et al.  Experimentally validated two dimensional numerical model for the solidification of PCM along a horizontal long tube , 2014 .

[13]  Xiaodong Wang,et al.  Design and synthesis of magnetic microcapsules based on n-eicosane core and Fe3O4/SiO2 hybrid shell for dual-functional phase change materials , 2014 .

[14]  A. Sari.  Fabrication and thermal characterization of kaolin-based composite phase change materials for latent heat storage in buildings , 2015 .

[15]  Xianxu Hu,et al.  Theoretical analysis of convective heat transfer enhancement of microencapsulated phase change material slurries , 2003 .

[16]  Yongsheng Lian,et al.  Numerical simulation of phase change material composite wallboard in a multi-layered building envelope , 2012 .