Exploring "Internet+Recycling": Mass balance and life cycle assessment of a waste management system associated with a mobile application.

Individual users cannot readily access the collection channels is a persistent problem in municipal solid waste (MSW) management, resulting in low MSW collection rates. A new waste management model, "Internet+Recycling", has come into being; this model enables individuals to arrange collection appointment through various online platforms, then the collectors pick up the waste on-site. It is believed that "Internet+Recycling" can be a solution to mitigate the collection barrier in MSW management, as it provides individuals a convenient access to formal waste management systems. However, whether this emerging MSW collection model would bring environmental benefits is yet unknown. We here quantitatively examine the mass balance and environmental performance of MSW recycling associated with the use of such a "Internet+Recycling" mobile application - Aibolv. All transactions occurred on the mobile application within a period of six monthare included, and all related activities are modeled using the methodology that combines material flow analysis (MFA) and life cycle assessment (LCA). According to the extant MSW management legislation in China, we classify the collected MSW into three categories, subsidized waste electric and electronic equipment (WEEE) like television and refrigerator - T1, unsubsidized WEEE like mobile phone - T2, and other recyclables like paper and fabric - T3. The MFA results show that plastics and common metals are the dominate secondary material streams, and glass, precious metals and battery metals are mainly recovered from WEEE. The LCA results indicate that the disposal of the T2 waste has the highest environmental savings, due to the recovery of precious metals. Increased remanufacturing rates impart negative impacts, while increments in the quantity of spent mobile phones could significantly improve overall environmental performance. Based on the acquired results, recommendations are provided for facilitating the future development of "Internet+Recycling", and limitations of this work are identified as well.

[1]  Colin Fitzpatrick,et al.  Repurposing end of life notebook computers from consumer WEEE as thin client computers – A hybrid end of life strategy for the Circular Economy in electronics , 2018, Journal of Cleaner Production.

[2]  Jinhui Li,et al.  On the sustainability of cobalt utilization in China , 2015 .

[3]  Roland Weber,et al.  An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling. , 2018, Journal of hazardous materials.

[4]  Wei Wang,et al.  An evaluation of the potential yield of indium recycled from end-of-life LCDs: A case study in China. , 2015, Waste management.

[5]  Yu Miao,et al.  Remanufacturing strategies: a solution for WEEE problem , 2017 .

[6]  Massimo Pizzol,et al.  Normalisation and weighting in life cycle assessment: quo vadis? , 2017, The International Journal of Life Cycle Assessment.

[7]  John P. Rice,et al.  Extended Producer Responsibility for waste televisions and computers: A regulatory evaluation of the Australian experience , 2017 .

[8]  E. Iacovidou,et al.  Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity? , 2018, The Science of the total environment.

[9]  Chang Wang,et al.  Digital empowerment in a WEEE collection business ecosystem: a comparative study of two typical cases in China , 2018 .

[10]  R. Thaler,et al.  Nudge: Improving Decisions About Health, Wealth, and Happiness , 2008 .

[11]  Nick J. Miles,et al.  Development of composites based on recycled polypropylene for injection moulding automobile parts using hierarchical clustering analysis and principal component estimate , 2016 .

[12]  Jinhui Li,et al.  Implications for the carrying capacity of lithium reserve in China , 2013 .

[13]  Jinhui Li,et al.  Management of electrical and electronic waste: A comparative evaluation of China and India , 2017 .

[14]  Paulo A. Ribeiro,et al.  Extended producer responsibility policy in Portugal: a strategy towards improving waste management performance , 2014 .

[15]  Xianlai Zeng,et al.  Uncovering the Recycling Potential of "New" WEEE in China. , 2016, Environmental science & technology.

[16]  X. Yao,et al.  Can bamboo fibres be an alternative to flax fibres as materials for plastic reinforcement? A comparative life cycle study on polypropylene/flax/bamboo laminates , 2018, Industrial Crops and Products.

[17]  Donald Huisingh,et al.  Consumer behavior and perspectives concerning spent household battery collection and recycling in China: a case study , 2015 .

[18]  Dabo Guan,et al.  China's toxic informal e-waste recycling:Local approaches to a global environmental problem , 2016 .

[19]  Costas A. Velis,et al.  Metrics for optimising the multi-dimensional value of resources recovered from waste in a circular economy: A critical review , 2017 .

[20]  Fan Fei,et al.  How to integrate the informal recycling system into municipal solid waste management in developing countries: Based on a China’s case in Suzhou urban area , 2016 .

[21]  Roland Hischier,et al.  Life cycle assessment of post-consumer plastics production from waste electrical and electronic equipment (WEEE) treatment residues in a Central European plastics recycling plant. , 2015, The Science of the total environment.

[22]  Xianlai Zeng,et al.  Global responses for recycling waste CRTs in e-waste. , 2016, Waste management.

[23]  J. Millward-Hopkins,et al.  A pathway to circular economy: Developing a conceptual framework for complex value assessment of resources recovered from waste , 2017 .

[24]  Xianlai Zeng,et al.  Innovating e-waste management: From macroscopic to microscopic scales. , 2017, The Science of the total environment.

[25]  Fu Gu,et al.  From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study. , 2017, The Science of the total environment.

[26]  Tianzhu Zhang,et al.  Comparisons of four categories of waste recycling in China's paper industry based on physical input-output life-cycle assessment model. , 2012, Waste management.

[27]  Matthew Cook,et al.  Producer responsibility, waste minimisation and the WEEE Directive: case studies in eco-design from the European lighting sector. , 2006, The Science of the total environment.

[28]  Alessia Amato,et al.  Printed circuit board recycling: A patent review , 2018 .

[29]  Jinhui Li,et al.  Resource conservation approached with an appropriate collection and upgrade-remanufacturing for used electronic products. , 2017, Waste management.

[30]  Gustav A Sandin,et al.  Environmental impact of textile reuse and recycling – A review , 2018 .

[31]  Reid Lifset,et al.  Varieties of business models for post-consumer recycling in China , 2018 .

[32]  H. Wenzel,et al.  Potential for circular economy in household WEEE management , 2017 .

[33]  Tommi Mikkonen,et al.  Early analysis of resource consumption patterns in mobile applications , 2017, Pervasive Mob. Comput..

[34]  Jessika Luth Richter,et al.  Extended Producer Responsibility for Lamps in Nordic Countries: best practices and challenges in closing material loops , 2016 .

[35]  P A Wäger,et al.  Environmental impacts of the Swiss collection and recovery systems for Waste Electrical and Electronic Equipment (WEEE): a follow-up. , 2011, The Science of the total environment.

[36]  Sergio Ulgiati,et al.  The relevance of site-specific data in Life Cycle Assessment (LCA). The case of the municipal solid waste management in the metropolitan city of Naples (Italy) , 2017 .

[37]  Nicholas J. Miles,et al.  Improvement of mechanical properties of recycled plastic blends via optimizing processing parameters using the Taguchi method and principal component analysis , 2014 .

[38]  Chong Du,et al.  Carbon footprint of textile throughout its life cycle: a case study of Chinese cotton shirts , 2015 .

[39]  Dong Yan,et al.  Lightweight energy consumption analysis and prediction for Android applications , 2018, Sci. Comput. Program..

[40]  Bo Liu,et al.  Supply and demand of some critical metals and present status of their recycling in WEEE. , 2017, Waste management.

[41]  L Biganzoli,et al.  Mass balance and life cycle assessment of the waste electrical and electronic equipment management system implemented in Lombardia Region (Italy). , 2015, The Science of the total environment.

[42]  He Xu,et al.  Survey and analysis of consumers' behaviour of waste mobile phone recycling in China , 2014 .

[43]  Lucia Rigamonti,et al.  Life cycle assessment of sub-units composing a MSW management system , 2010 .

[44]  Magdalena Svanström,et al.  A Carbon Footprint of Textile Recycling: A Case Study in Sweden , 2015 .

[45]  Beverley Thorpe,et al.  Advancing Extended Producer Responsibility in Canada , 2006 .

[46]  Andrew Brown,et al.  Fully integrated modelling for sustainability assessment of resource recovery from waste. , 2018, The Science of the total environment.

[47]  Garth T. Hickle.  Comparative Analysis of Extended Producer Responsibility Policy in the United States and Canada , 2013 .

[48]  E. Iacovidou,et al.  Post-consumer plastic packaging waste in England: Assessing the yield of multiple collection-recycling schemes. , 2018, Waste management.

[49]  Jinhui Li,et al.  Urban Mining of E-Waste is Becoming More Cost-Effective Than Virgin Mining. , 2018, Environmental science & technology.

[50]  Mingjiang Ni,et al.  Life cycle assessment of pyrolysis, gasification and incineration waste-to-energy technologies: Theoretical analysis and case study of commercial plants. , 2018, The Science of the total environment.

[51]  Bangyi Li,et al.  Trade-off between remanufacturing and recycling of WEEE and the environmental implication under the Chinese Fund Policy , 2017 .

[52]  Fu Gu,et al.  An integrated architecture for implementing extended producer responsibility in the context of Industry 4.0 , 2018, Int. J. Prod. Res..

[53]  Marco Frey,et al.  Extended producer responsibility: The impact of organizational dimensions on WEEE collection from households. , 2017, Waste management.

[54]  Zhenming Xu,et al.  Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process. , 2012, Environmental science & technology.

[55]  Fabián Echegaray,et al.  Assessing the Intention-Behavior Gap in Electronic Waste Recycling: The Case of Brazil , 2016 .

[56]  Ming Xu,et al.  “Internet +” recyclable resources: A new recycling mode in China , 2018, Resources, Conservation and Recycling.

[57]  Fu Gu,et al.  An investigation of the current status of recycling spent lithium-ion batteries from consumer electronics in China , 2017 .

[58]  Elena Maria Iannicelli-Zubiani,et al.  Environmental impacts of a hydrometallurgical process for electronic waste treatment: A life cycle assessment case study , 2017 .

[59]  Laura Talens Peiró,et al.  Material flow analysis and energy requirements of mobile phone material recovery processes , 2013, The International Journal of Life Cycle Assessment.

[60]  Jinbo Song,et al.  PESTEL analysis of the development of the waste-to-energy incineration industry in China , 2017 .

[61]  Fu Gu,et al.  Performance evaluation for composites based on recycled polypropylene using principal component analysis and cluster analysis , 2016 .

[62]  Xianlai Zeng,et al.  Examining environmental management of e-waste: China's experience and lessons , 2017 .

[63]  Fu Gu,et al.  Internet of things and Big Data as potential solutions to the problems in waste electrical and electronic equipment management: An exploratory study. , 2017, Waste management.

[64]  John P Giesy,et al.  End-of-life (EoL) mobile phone management in Hong Kong households. , 2017, Journal of environmental management.