The dielectrophoretic attachment of nanotube fibres on tungsten needles

The dielectrophoretic attachment of multi-wall carbon nanotubes (MWNTs) on the apex of tungsten needles immersed in a suspension was investigated. Growth of branched nanotube fibrils out of the needle surface was observed when an ac bias with a frequency of 1 MHz was applied. The fibrils finally coagulate to a single nanotube fibre anchored at the tip's apex during a retraction of the tip from the suspension. Because of the very high dielectric constant of MWNTs, a moderate electric field intensity is sufficient for attaching nanotubes on the tip. The former was approximately two orders of magnitude lower than that reported in previous experiments. The diameter of the nanotube fibres can be controlled by the applied voltage.

[1]  Otto Zhou,et al.  Assembly of 1D Nanostructures into Sub‐micrometer Diameter Fibrils with Controlled and Variable Length by Dielectrophoresis , 2003 .

[2]  Xinqi Chen,et al.  Aligning single-wall carbon nanotubes with an alternating-current electric field , 2001 .

[3]  Jian Zhang,et al.  Efficient Fabrication of Carbon Nanotube Point Electron Sources by Dielectrophoresis , 2004 .

[4]  Otto Zhou,et al.  Rapid and reproducible fabrication of carbon nanotube AFM probes by dielectrophoresis. , 2005, Nano letters.

[5]  Boris Kozinsky,et al.  Static dielectric properties of carbon nanotubes from first principles. , 2006, Physical review letters.

[6]  I. Vattulainen,et al.  Dielectrophoresis of nanocolloids: A molecular dynamics study , 2005, The European physical journal. E, Soft matter.

[7]  June-Ki Park,et al.  Use of dielectrophoresis in the fabrication of an atomic force microscope tip with a carbon nanotube: experimental investigation , 2006 .

[8]  T. D. Yuzvinsky,et al.  Length control and sharpening of atomic force microscope carbon nanotube tips assisted by an electron beam , 2005 .

[9]  Benedict,et al.  Static polarizabilities of single-wall carbon nanotubes. , 1995, Physical review. B, Condensed matter.

[10]  D. A. Dunnett.  Classical Electrodynamics , 2020, Nature.

[11]  Hiroshi Kawarada,et al.  Enhancement of field emission characteristics of tungsten emitters by single-walled carbon nanotube modification , 2006 .

[12]  Larry A. Nagahara,et al.  Directed placement of suspended carbon nanotubes for nanometer-scale assembly , 2002 .

[13]  Hywel Morgan,et al.  Dielectrophoretic manipulation of rod-shaped viral particles , 1997 .

[14]  H. Morgan,et al.  Ac electrokinetics: a review of forces in microelectrode structures , 1998 .

[15]  Chang-Soo Han,et al.  Use of dielectrophoresis in the fabrication of an atomic force microscope tip with a carbon nanotube: a numerical analysis , 2005, Nanotechnology.

[16]  C. L. Cheung,et al.  Growth and fabrication with single-walled carbon nanotube probe microscopy tips , 2000 .

[17]  W. G. Matthews,et al.  Simple and efficient method for carbon nanotube attachment to scanning probes and other substrates , 2003 .

[18]  H. Dai,et al.  Nanotubes as nanoprobes in scanning probe microscopy , 1996, Nature.

[19]  Thomas B. Jones,et al.  Electromechanics of Particles , 1995 .

[20]  Seiji Akita,et al.  RAPID COMMUNICATION: Orientation and purification of carbon nanotubes using ac electrophoresis , 1998 .

[21]  Andrew G. Rinzler,et al.  Fibers of aligned single-walled carbon nanotubes: Polarized Raman spectroscopy , 2000 .

[22]  R. Annamalai,et al.  Electrophoretic drawing of continuous fibers of single-walled carbon nanotubes , 2005 .

[23]  R. Krupke,et al.  Probing dielectrophoretic force fields with metallic carbon nanotubes , 2006 .

[24]  Y. Saito,et al.  Dynamic behavior of carbon nanotube field emitters observed by in situ transmission electron microscopy , 2005 .

[25]  Yoon Keun Kwak,et al.  The effect of the shape of a tip's apex on the fabrication of an AFM tip with an attached single carbon nanotube , 2005 .

[26]  R. Hall.  The Application of Non‐Integral Legendre Functions to Potential Problems , 1949 .