A comparative study of H2S poisoning on electrode behavior of Ni/YSZ and Ni/GDC anodes of solid oxide fuel cells

Abstract The effect of sulfur poisoning on the activity and performance of Ni/Y2O3–ZrO2 (Ni/YSZ) and Ni/Gd2O3–CeO2 (Ni/GDC) cermet anodes of solid oxide fuel cells has been examined by polarization and electrochemical impedance spectroscopy (EIS) measurements at 800 °C. The anodes are alternately polarized in pure H2 and H2S-containing H2 fuels with H2S concentration gradually increased from 5 ppm to 700 ppm at 200 mA cm−2 for 2 h. The results show that the anode potential of Ni/YSZ electrodes measured in pure H2 decreases from 0.61 V to 0.34 V after exposure to H2S-containing H2 fuels with H2S concentration increased from 5 to 700 ppm. On the other hand, the anode potential of Ni/GDC electrodes measured in pure H2 decreases from 0.78 V to 0.72 V under identical test conditions. The degradation in performance for the hydrogen oxidation in H2S-containing H2 fuels is substantially smaller on Ni/GDC anodes, as compared to that on Ni/YSZ anodes. Similar trend is also observed for the change of the electrode polarization resistance for the hydrogen oxidation reaction on the Ni/YSZ and Ni/GDC anodes after exposure to H2S-containing H2 fuels. The SEM results indicate the structure modification of Ni/YSZ anodes only occurs on Ni particles, and in the case of Ni/GDC anodes, structural modification on both Ni and GDC phases occurs. The mixed ionic and electronic conductivity of GDC phase could be the primary reason for the high sulfur tolerance of the Ni/GDC cermet anodes.

[1]  Umit S. Ozkan,et al.  Effect of hydrogen sulfide on the catalytic activity of Ni-YSZ cermets , 2008 .

[2]  A. Hagen,et al.  The effect of H2S on the performance of Ni-YSZ anodes in solid oxide fuel cells , 2009 .

[3]  S. Singhal,et al.  Advanced anodes for high-temperature fuel cells , 2004, Nature materials.

[4]  N. Woudstra,et al.  Impact of biosyngas and its components on sofc anodes , 2005 .

[5]  Hongpeng He,et al.  Sulphur tolerant shift reaction catalysts for nickel-based SOFC anode , 2008 .

[6]  Jason P. Trembly,et al.  Effects of coal syngas and H2S on the performance of solid oxide fuel cells: Single-cell tests , 2006 .

[7]  S. Pejovnik,et al.  A Study of Metal (Ni, Pt, Au)/Yttria-Stabilized Zirconia Interface in Hydrogen Atmosphere at Elevated Temperature , 2001 .

[8]  Meilin Liu,et al.  Sulfur Poisoning and Regeneration of Ni-Based Anodes in Solid Oxide Fuel Cells , 2007 .

[9]  J. Vohs,et al.  Determining the Ce2O2S–CeOx phase boundary for conditions relevant to adsorption and catalysis , 2003 .

[10]  S. Jiang,et al.  Fabrication and characterization of anode-supported tubular solid-oxide fuel cells by slip casting and dip coating techniques , 2009 .

[11]  Y. Matsuzaki,et al.  The Poisoning Effect of Sulfur-Containing Impurity Gas on a SOFC Anode: Part I , 2000 .

[12]  S. Jiang,et al.  NiO/YSZ, anode-supported, thin-electrolyte, solid oxide fuel cells fabricated by gel casting , 2007 .

[13]  Catherine M. Grgicak,et al.  SOFC anodes for direct oxidation of hydrogen and methane fuels containing H2S , 2008 .

[14]  S. Jiang,et al.  A review of anode materials development in solid oxide fuel cells , 2004 .

[15]  Nigel P. Brandon,et al.  The effect of fuel composition and temperature on the interaction of H2S with nickel-ceria anodes for Solid Oxide Fuel Cells , 2008 .

[16]  V. Birss,et al.  Effect of hydrogen sulfide on the direct internal reforming of methane in solid oxide fuel cells , 2009 .

[17]  L. Gauckler,et al.  Reaction mechanism of Ni pattern anodes for solid oxide fuel cells , 2000 .

[18]  Vladislav V. Kharton,et al.  Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review , 2008 .

[19]  I. Celik,et al.  Effects of coal syngas impurities on anodes of solid oxide fuel cells , 2008 .

[20]  San Ping Jiang,et al.  Chromium deposition and poisoning in dry and humidified air at (La0.8Sr0.2)0.9MnO3+δ cathodes of solid oxide fuel cells , 2010 .

[21]  Meilin Liu,et al.  Influence of cell voltage and current on sulfur poisoning behavior of solid oxide fuel cells , 2007 .

[22]  Christopher S. Johnson,et al.  Sulfur-tolerant anode materials for solid oxide fuel cell application , 2007 .

[23]  K. Sasaki,et al.  H2S Poisoning of Solid Oxide Fuel Cells , 2006 .

[24]  S. Jiang,et al.  Hydrogen Oxidation at the Nickel and Platinum Electrodes on Yttria‐Tetragonal Zirconia Electrolyte , 1997 .

[25]  Y. Xiong,et al.  Materials and reaction mechanisms at anode/electrolyte interfaces for SOFCs , 2006 .

[26]  Meilin Liu,et al.  Identification of nickel sulfides on Ni-YSZ cermet exposed to H2 fuel containing H2S using Raman spectroscopy , 2006 .

[27]  Catherine M. Grgicak,et al.  Improved Performance of Ni- and Co-YSZ Anodes via Sulfidation to NiS- and CoS-YSZ. Effects of Temperature on Electrokinetic Parameters , 2007 .

[28]  G. Botte,et al.  Theoretical Investigations of NiYSZ in the Presence of H2S , 2006 .

[29]  S. Jiang,et al.  An electrode kinetics study of H2 oxidation on Ni/Y2O3–ZrO2 cermet electrode of the solid oxide fuel cell , 1999 .

[30]  J. Vohs,et al.  Highly Sulfur Tolerant Cu-Ceria Anodes for SOFCs , 2005 .

[31]  S. Jiang,et al.  Performance of GDC-Impregnated Ni Anodes of SOFCs , 2004 .

[32]  Zhe Cheng,et al.  Enhanced Sulfur and Coking Tolerance of a Mixed Ion Conductor for SOFCs: BaZr0.1Ce0.7Y0.2–xYbxO3–δ , 2009, Science.

[33]  S. Jiang,et al.  H2 oxidation on Ni/Y-TZP cermet electrodes – a comparison of electrode behaviour by GCI and EIS techniques , 1999 .

[34]  Catherine M. Grgicak,et al.  Synergistic effects of Ni1−xCox-YSZ and Ni1−xCux-YSZ alloyed cermet SOFC anodes for oxidation of hydrogen and methane fuels containing H2S , 2008 .

[35]  Vladislav V. Kharton,et al.  Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review , 2008 .

[36]  Meilin Liu,et al.  Characterization of sulfur poisoning of Ni–YSZ anodes for solid oxide fuel cells using in situ Raman microspectroscopy , 2007 .

[37]  N. Sammes,et al.  Physical, chemical and electrochemical properties of pure and doped ceria , 2000 .