Dynamic analysis of energy storage unit of the hydraulic hybrid vehicle

A new configuration of hydraulic hybrid vehicle (HHV) was presented, which mainly consists of an engine, high-pressure accumulator, lower-pressure reservoir and hydraulic transformer (HT) connected to common pressure rail (CPR), and the working principle of hydraulic hybrid vehicle has been described to extend its energy-regenerated potential. Moreover, the mathematical models of the instantaneous pressure ratio of HT and the characteristic parameters of parallel and series accumulator (i.e. effective volume, specific energy, and charge-discharge efficiency) based on lumped parameters method were built, respectively. The simulation and experimental tests of dynamic characteristics of HT and accumulator were done, the result shows that the theoretical analysis was the same as the experimental results by comparing them in the curve trend, and the series accumulator was much superior to parallel accumulator in terms of pulsation damping of hydraulic transformer, that is the simulation results reasonably and appropriately.

[1]  Rosemary Chapin,et al.  Changing the Paradigm , 2002 .

[2]  Brian L. Van Batavia.  Hydraulic Hybrid Vehicle Energy Management System , 2009 .

[3]  Michael A. Kluger,et al.  An Overview of Current Automatic, Manual and Continuously Variable Transmission Efficiencies and Their Projected Future Improvements , 1999 .

[4]  Zhao Fu,et al.  The Innas Hydraulic Transformer The Key to the Hydrostatic Common Pressure Rail , 2000 .

[5]  Huayong Yang.  DEVELOPMENT OF HYDRAULIC TRANSFORMER , 2003 .

[6]  Torsten Kohmäscher,et al.  DESIGN AND FUEL ECONOMY OF A SERIES HYDRAULIC HYBRID VEHICLE , 2008 .

[7]  Peter A. J. Achten.  The Hydrid Transmission , 2007 .

[8]  Bing Xu.  Analysis of instantaneous flow rate character of hydraulic transformer , 2007 .

[9]  Guoqing Liu,et al.  Parameter matchin and optimization for a hydraulic power-assistant system , 2010 .

[10]  Zoran Filipi,et al.  Series Hydraulic Hybrid Propulsion for a Light Truck - Optimizing the Thermostatic Power Management , 2007 .

[11]  Dong Peng,et al.  Advanced Braking Control System for Hybrid Electric Vehicle Using Fuzzy Control Logic , 2006 .

[12]  P.A.J. Achten,et al.  Transforming future hydraulics : a new design of a hydraulic transformer , 1997 .

[13]  Bing Xu.  DISPLACEMENT OF HYDRAULIC TRANSFORMER , 2006 .

[14]  Tao Shang,et al.  Characteristic analysis of hydraulic hybrid vehicle based on limit cycle , 2012 .

[15]  Peter A. J. Achten,et al.  Design of Dynamic and Efficient Hydraulic Systems Around a Simple Hydraulic Grid , 2002 .

[16]  Yang Song.  Research on Optimization Energy-saving Control Algorithm of the Hydraulic Hybrid Vehicle , 2010 .

[17]  Ronnie Werndin,et al.  Efficiency performance and control aspects of a Hydraulic Transformer , 1999 .

[18]  S. Ikeo,et al.  Study on Hybrid Vehicle Using Constant Pressure Hydraulic System with Flywheel for Energy Storage , 2004 .

[19]  Zoran Filipi,et al.  Optimal Power Management for a Hydraulic Hybrid Delivery Truck , 2004 .

[20]  Sun Hui,et al.  Multi-objective optimization for hydraulic hybrid vehicle based on adaptive simulated annealing genetic algorithm , 2010, Eng. Appl. Artif. Intell..

[21]  Sun Hui,et al.  Research on the system configuration and energy control strategy for parallel hydraulic hybrid loader , 2010 .

[22]  Heather Gruenewald,et al.  Design and Control Considerations for a Series Heavy Duty Hybrid Hydraulic Vehicle , 2009 .