Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis

Abstract The influence of inherent imperfections should be systematically investigated to ensure the safety and utilization of additive manufacturing-fabricated multi-scale parts and structures. Herein, two different types of multi-layer lattice sandwich panels, BCC and BCCZ, are prepared by selective laser melting (SLM) using the AlSi10Mg material. X-ray micro-computed tomography (μ-CT) is employed to capture the realistic geometrical information of lattice struts. Based on the statistical characteristics, a novel finite element model is established, which considers the specific non-uniform distribution of geometrical imperfection. Uniaxial compressive tests are performed to evaluate the influence of defects and number of layers on the overall mechanical performance and energy absorption capability. The results reveal that the diameter deviation of struts is changed with the change of strut location and built angle. In terms of compressive modulus and initial crushing strength, the prediction results of the reconstruction model are consistent with experimental results as compared to the as-designed and statistical average models. The layer-by-layer crushing behavior is the main failure mode for the multi-layer lattice panels. With the increase of layers number, the densification strain and crash load efficiency increased, whereas the specific energy absorption gradually decreased due to the impact of boundary conditions and failure modes.

[1]  M. Smith,et al.  Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique , 2013 .

[2]  F. Scarpa,et al.  3D Printed Hierarchical Honeycombs with Shape Integrity under Large Compressive Deformations , 2018 .

[3]  Fu Minghui,et al.  A novel category of 3D chiral material with negative Poisson's ratio , 2018 .

[4]  Damiano Pasini,et al.  Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting , 2017 .

[5]  Xi-Qiao Feng,et al.  Hierarchical chirality transfer in the growth of Towel Gourd tendrils , 2013, Scientific Reports.

[6]  N. Nuño,et al.  Finite element modelling approaches for well-ordered porous metallic materials for orthopaedic applications: cost effectiveness and geometrical considerations , 2016, Computer methods in biomechanics and biomedical engineering.

[7]  A. Tyas,et al.  Energy absorption in lattice structures in dynamics: Experiments , 2016 .

[8]  M. Nikzad,et al.  Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology , 2018, Materials & Design.

[9]  Patrick Hébert,et al.  Median Filtering in Constant Time , 2007, IEEE Transactions on Image Processing.

[10]  Wen Feng Lu,et al.  Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading , 2018, Additive Manufacturing.

[11]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[12]  D. Fang,et al.  Crushing behavior of multi-layer metal lattice panel fabricated by selective laser melting , 2018, International Journal of Mechanical Sciences.

[13]  M. Ashby,et al.  The topological design of multifunctional cellular metals , 2001 .

[14]  I. Ashcroft,et al.  Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading , 2018, Materials & Design.

[15]  Lawrence E Murr,et al.  Compressive and fatigue behavior of functionally graded Ti-6Al-4V meshes fabricated by electron beam melting , 2018 .

[16]  Wesley J. Cantwell,et al.  The Mechanical Properties of Sandwich Structures Based on Metal Lattice Architectures , 2010 .

[17]  Yonggang Huang,et al.  Printing, folding and assembly methods for forming 3D mesostructures in advanced materials , 2017 .

[18]  J. Grotowski,et al.  High specific strength and stiffness structures produced using selective laser melting , 2014 .

[19]  Yongle Sun,et al.  Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling , 2018 .

[20]  D. Gu,et al.  Structural optimization of re-entrant negative Poisson's ratio structure fabricated by selective laser melting , 2017 .

[21]  A. A. Zadpoor,et al.  Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing , 2013 .

[22]  Thierry Pun,et al.  A new method for grey-level picture thresholding using the entropy of the histogram , 1980 .

[23]  L. Hitzler,et al.  Direction and location dependency of selective laser melted AlSi10Mg specimens , 2017 .

[24]  Lai‐Chang Zhang,et al.  Selective Laser Melting of Titanium Alloys and Titanium Matrix Composites for Biomedical Applications: A Review   , 2016 .

[25]  D. Fang,et al.  Macroscopic mechanical response of chiral-type cylindrical metastructures under axial compression loading , 2018, Materials & Design.

[26]  J. Papadopoulos,et al.  Compression and impact testing of two-layer composite pyramidal-core sandwich panels , 2012 .

[27]  Umar Ansari,et al.  Review of Mechanics and Applications of Auxetic Structures , 2014 .

[28]  Vincenzo Crupi,et al.  Static behavior of lattice structures produced via direct metal laser sintering technology , 2017 .

[29]  L. Valdevit,et al.  Ultralight Metallic Microlattices , 2011, Science.

[30]  Douglas T. Queheillalt,et al.  Pyramidal lattice truss structures with hollow trusses , 2005 .

[31]  Thomas S. Huang,et al.  A fast two-dimensional median filtering algorithm , 1979 .

[32]  J. Harrigan,et al.  Compressive Strain at the Onset of Densification of Cellular Solids , 2006 .

[33]  H. Zarei,et al.  Crashworthiness optimization of empty and filled aluminum crash boxes , 2007 .

[34]  Seung-Kyum Choi,et al.  Uncertainty quantification and validation of 3D lattice scaffolds for computer-aided biomedical applications. , 2017, Journal of the mechanical behavior of biomedical materials.

[35]  Recep Gümrük,et al.  Static mechanical behaviours of stainless steel micro-lattice structures under different loading conditions , 2013 .

[36]  Naoki Takano,et al.  Stochastic prediction of apparent compressive stiffness of selective laser sintered lattice structure with geometrical imperfection and uncertainty in material property , 2017 .

[37]  L. Gibson.  Biomechanics of cellular solids. , 2005, Journal of biomechanics.

[38]  Liya Zhu,et al.  A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering , 2018, Scientific Reports.

[39]  H. Wadley,et al.  Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness , 2017, Nature.

[40]  Ahmed Hussein,et al.  Evaluations of cellular lattice structures manufactured using selective laser melting , 2012 .

[41]  Zhenyu Yang,et al.  Effective elastic properties and initial yield surfaces of two 3D lattice structures , 2018 .

[42]  Rashid K. Abu Al-Rub,et al.  Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials , 2018 .

[43]  Martin Leary,et al.  Selective laser melting (SLM) of AlSi12Mg lattice structures , 2016 .

[44]  Li Ma,et al.  Mechanical properties of 3D re-entrant auxetic cellular structures , 2017 .

[45]  D Pasini,et al.  Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants. , 2017, Acta biomaterialia.

[46]  Di Wang,et al.  Evaluation of topology-optimized lattice structures manufactured via selective laser melting , 2018 .

[47]  J. Kruth,et al.  Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures , 2015 .

[48]  E. Maire,et al.  Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches , 2018, Acta Materialia.

[49]  Seung Chul Han,et al.  A New Type of Low Density Material: Shellular , 2015, Advanced materials.

[50]  Haydn N. G. Wadley,et al.  On the performance of truss panels with Kagomé cores , 2003 .

[51]  Qifa Zhou,et al.  Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.

[52]  Hui-ping Tang,et al.  Mechanical behavior of open-cell rhombic dodecahedron Ti–6Al–4V lattice structure , 2015 .

[53]  D. Fang,et al.  Macroscopic response of carbon-fiber pyramidal truss core panel taking account of local defect , 2015 .

[54]  T. Tancogne-Dejean,et al.  Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading , 2016 .

[55]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[56]  S. Masood,et al.  Mechanical properties and energy absorption capability of functionally graded F2BCC lattice fabricated by SLM , 2018 .