Preparation and evaluation of thermal enhanced silica fume by incorporating organic PCM, for application to concrete
暂无分享,去创建一个
Jisoo Jeon | Junghoon Cha | Sumin Kim | Jisoo Jeon | Sumin Kim | S. Jeong | Su-Gwang Jeong | Junhyun Kim | Junhyun Kim | Junghoon Cha
[1] Yi Wang,et al. Stearic acid/silica fume composite as form-stable phase change material for thermal energy storage , 2011 .
[2] Ahmet Sarı,et al. Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .
[3] A. Sari,et al. Capric–myristic acid/expanded perlite composite as form-stable phase change material for latent heat thermal energy storage , 2008 .
[4] Sumin Kim,et al. The effect of types of maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites , 2007 .
[5] Zhengguo Zhang,et al. Study on paraffin/expanded graphite composite phase change thermal energy storage material , 2006 .
[6] Renbin Lin,et al. Characteristics and reactivities of Ca(OH)2/silica fume sorbents for low-temperature flue gas desulfurization , 2003 .
[7] Peter Schossig,et al. Micro-encapsulated phase-change materials integrated into construction materials , 2005 .
[8] Jianlei Niu,et al. Raising evaporative cooling potentials using combined cooled ceiling and mPCM slurry storage , 2008 .
[9] Luisa F. Cabeza,et al. Materials used as PCM in thermal energy storage in buildings: A review , 2011 .
[10] L. Drzal,et al. High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets , 2009 .
[11] Xu Xu,et al. Modeling and simulation on the thermal performance of shape-stabilized phase change material floor used in passive solar buildings , 2005 .
[12] A. Sari,et al. Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage , 2009 .
[13] Yuan Hu,et al. Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material , 2010 .
[14] Xin Wang,et al. Influence of additives on thermal conductivity of shape-stabilized phase change material , 2006 .
[15] A. Abhat. Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .
[16] G. Sezer. Compressive strength and sulfate resistance of limestone and/or silica fume mortars , 2012 .
[17] Bogdan Diaconu,et al. Transient thermal response of a PCS heat storage system , 2009 .
[18] M. Amin,et al. Hydration characteristics of hydrothermal treated cement kiln dust–sludge–silica fume pastes , 2011 .
[19] K. Sagara,et al. Latent Heat Storage Materials and Systems: A Review , 2005 .
[20] Luisa F. Cabeza,et al. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .
[21] Velu Saraswathy,et al. Estimation of the permeability of silica fume cement concrete , 2010 .
[22] A. Chaipanich,et al. Compressive strength, microstructure and thermal analysis of autoclaved and air cured structural lightweight concrete made with coal bottom ash and silica fume , 2010 .
[23] Jian Song,et al. Novel gelatinous shape-stabilized phase change materials with high heat storage density , 2011 .
[24] Lu Zhang,et al. RETRACTED: Preparation and thermal properties of form stable paraffin phase change material encapsulation , 2006 .
[25] A. Mclean,et al. Recovery of silicon from silica fume , 2011 .
[26] J. J. Brooks,et al. Effect of silica fume on mechanical properties of high-strength concrete , 2004 .
[27] Jungki Seo,et al. Performance evaluation of the microencapsulated PCM for wood-based flooring application , 2012 .
[28] Byoungho Lee,et al. Polymerization of aniline on bacterial cellulose and characterization of bacterial cellulose/polyaniline nanocomposite films , 2012 .