Performance evaluation and nanofluid using capability study of a solar parabolic trough collector

The aim of present work is to prepare a standard pilot of trough collector to investigate the ways of its performance enhancement. In this paper, a pilot of trough collector was designed and manufactured in a simple way with a 0.7 m width and 2 m in height reflector, which was made of steel mirror. The design, construction procedure and the new shape of receiver coupling are defined by details in the manuscript. The transient response and the optical and thermal performances of the collector were compared using four kinds of receivers: a black painted vacuumed steel tube, a copper bare tube with black chrome coating, a glass enveloped non-evacuated copper tube with black chrome coating, and a vacuumed copper tube with black chrome coating. Then 0.2% and 0.3% carbon nanotube/oil based nanofluids were prepared as working fluid and tested in the pilot with the black chrome coated vacuumed copper absorber tube. All the operating conditions were considered according to ASHRAE Standard 93 (2010) in all steps of test procedure. The results show that the global efficiency of vacuumed tube is averagely 11% higher than the bare tube efficiency, which is in good agreement with the previous works. Also, the nanofluid shows high thermal potential for further and more complete examinations. At last, a model of global efficiency is curve fitted for present prototype and compared with the previous models.

[1]  C. P. Cameron,et al.  Solar Kinetics, Incorporated, Modular Industrial Solar Retrofit qualification test results , 1987 .

[2]  Jun Wang,et al.  An optimized model and test of the China’s first high temperature parabolic trough solar receiver , 2010 .

[3]  Feng Zhao,et al.  Thermal performance of an open thermosyphon using nanofluid for evacuated tubular high temperature air solar collector , 2013 .

[4]  E. A. Arinze,et al.  Thermal performance evaluation of active and passive water heat-storage schemes for solar energy applications , 1985 .

[5]  Marco Sotte.  Design, test and mathematical modeling of parabolic trough solar collectors , 2012 .

[6]  T. Yousefi,et al.  An experimental investigation on the effect of MWCNT-H2O nanofluid on the efficiency of flat-plate solar collectors , 2012 .

[7]  Eduardo Zarza,et al.  Parabolic-trough solar collectors and their applications , 2010 .

[8]  C. P. Cameron,et al.  Foster Wheeler Solar Development Corporation Modular Industrial Solar Retrofit qualification test results , 1987 .

[9]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .

[10]  A. E. Kabeel,et al.  Improving the performance of solar still by using nanofluids and providing vacuum , 2014 .

[11]  Yulong Ding,et al.  Heat transfer of aqueous suspensions of carbon nanotubes (CNT nanofluids) , 2006 .

[12]  Nidal Abu-Hamdeh,et al.  Design and performance characteristics of solar adsorption refrigeration system using parabolic trough collector: Experimental and statistical optimization technique , 2013 .

[13]  Polyvios Eleftheriou,et al.  Design and performance characteristics of a parabolic-trough solar-collector system , 1994 .

[14]  T. Yousefi,et al.  An experimental investigation on the effect of Al2O3–H2O nanofluid on the efficiency of flat-plate solar collectors , 2012 .

[15]  T. Sornakumar,et al.  Design, manufacture and testing of fiberglass reinforced parabola trough for parabolic trough solar collectors , 2007 .

[16]  Eckhard Lüpfert,et al.  Advances in Parabolic Trough Solar Power Technology , 2002 .

[17]  D. Wen,et al.  Experimental investigation of a silver nanoparticle-based direct absorption solar thermal system , 2014 .

[18]  Eduardo Zarza,et al.  Concentrating Solar Thermal Power , 2017 .

[19]  Robert A. Taylor,et al.  Applicability of nanofluids in high flux solar collectors , 2011 .

[20]  G. Kumaresan,et al.  Performance studies of a solar parabolic trough collector with a thermal energy storage system , 2012 .

[21]  S. Quoilin,et al.  Performance and design optimization of a low-cost solar organic Rankine cycle for remote power generation , 2011 .

[22]  A. Rashidi,et al.  Experimental study on the heat transfer enhancement of MWNT-water nanofluid in a shell and tube heat exchanger , 2012 .

[23]  Alibakhsh Kasaeian,et al.  Heat transfer enhancement in parabolic trough collector tube using Al2O3/synthetic oil nanofluid , 2014 .

[24]  Todd Otanicar,et al.  Solar Energy Harvesting Using Nanofluids-Based Concentrating Solar Collector , 2012 .