Characteristic of silica nanoparticles on mechanical performance and microstructure of sulphoaluminate cement/ordinary Portland cement binary blends

[1]  Qiang Wang,et al.  Investigation on the poor fluidity of electrically conductive cement-graphite paste: Experiment and simulation , 2019, Materials & Design.

[2]  M. Yam,et al.  1-Year development trend of concrete compressive strength using Calcium Sulfoaluminate cement blended with OPC, PFA and GGBS , 2019, Construction and Building Materials.

[3]  Min Liu,et al.  Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system , 2019, Construction and Building Materials.

[4]  Xingyang He,et al.  Utilization of lithium slag by wet-grinding process to improve the early strength of sulphoaluminate cement paste , 2018, Journal of Cleaner Production.

[5]  Xiaojian Gao,et al.  Potential application of Portland cement-calcium sulfoaluminate cement blends to avoid early age frost damage , 2018, Construction and Building Materials.

[6]  Junjie Zhang,et al.  Effects of ordinary Portland cement on the early properties and hydration of calcium sulfoaluminate cement , 2018, Construction and Building Materials.

[7]  T. Pastore,et al.  CSA-based Portland-free binders to manufacture sustainable concretes for jointless slabs on ground , 2018, Construction and Building Materials.

[8]  I. Mehdipour,et al.  Effect of shrinkage reducing admixture on early expansion and strength evolution of calcium sulfoaluminate blended cement , 2018, Cement and Concrete Composites.

[9]  Alireza Joshaghani,et al.  Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review , 2018, Construction and Building Materials.

[10]  M. Sheikh,et al.  Mechanical behaviour of micro-fine steel fibre reinforced sulphoaluminate cement composite , 2018 .

[11]  Zhen Li,et al.  Novel low cost and durable rapid-repair material derived from industrial and agricultural by-products , 2017 .

[12]  Dengquan Wang,et al.  The role of fly ash microsphere in the microstructure and macroscopic properties of high-strength concrete , 2017 .

[13]  Z. Shui,et al.  Effect of coral filler on the hydration and properties of calcium sulfoaluminate cement based materials , 2017 .

[14]  Mohd Zamin Jumaat,et al.  Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review , 2017 .

[15]  Xiao-dong Shen,et al.  Effect of Nano-SiO2 on the Early Hydration of Alite-Sulphoaluminate Cement , 2017, Nanomaterials.

[16]  Xiaopeng Shang,et al.  Effects of amorphous AH3 phase on mechanical properties and hydration process of C4A3S¯-CS¯H2-CH-H2O system , 2017 .

[17]  D. Gastaldi,et al.  Hydration products in sulfoaluminate cements: Evaluation of amorphous phases by XRD/solid-state NMR , 2016 .

[18]  Anwar M. Mohamed,et al.  Influence of nano materials on flexural behavior and compressive strength of concrete , 2016 .

[19]  Guang Ye,et al.  Cement hydration and microstructure in concrete repairs with cementitious repair materials , 2016 .

[20]  Paramita Mondal,et al.  Physico-chemical interaction between mineral admixtures and OPC–calcium sulfoaluminate (CSA) cements and its influence on early-age expansion , 2016 .

[21]  K. Hossain,et al.  Effects of the addition of nanosilica on the rheology, hydration and development of the compressive strength of cement mortars , 2015 .

[22]  Paramita Mondal,et al.  Influence of Calcium Sulfoaluminate (CSA) Cement Content on Expansion and Hydration Behavior of Various Ordinary Portland Cement‐CSA Blends , 2015 .

[23]  André Lecomte,et al.  Hydration of ordinary Portland cement and calcium sulfoaluminate cement blends , 2015 .

[24]  A. Shalaby,et al.  Characterizing the performance of cementitious partial-depth repair materials in cold climates , 2014 .

[25]  Karen L. Scrivener,et al.  Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate , 2014 .

[26]  Hjh Jos Brouwers,et al.  SCC modification by use of amorphous nano-silica , 2014 .

[27]  D. Damidot,et al.  Leaching of calcium sulfoaluminate cement pastes by water at regulated pH and temperature: Experimental investigation and modeling , 2013 .

[28]  M. Oltulu,et al.  Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: A comparative study , 2013 .

[29]  G. Saoût,et al.  Hydration of Portland cement with additions of calcium sulfoaluminates , 2013 .

[30]  Hesam Madani,et al.  The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement , 2012 .

[31]  Frank Winnefeld,et al.  Beneficial use of limestone filler with calcium sulphoaluminate cement , 2012 .

[32]  Guoxin Li,et al.  Effects of two retarders on the fluidity of pastes plasticized with aminosulfonic acid-based superplasticizers , 2011 .

[33]  Florence Sanchez,et al.  Nanotechnology in concrete – A review , 2010 .

[34]  Frank Winnefeld,et al.  The ternary system Portland cement–calcium sulphoaluminate clinker–anhydrite: Hydration mechanism and mortar properties , 2010 .

[35]  Céline Cau Dit Coumes,et al.  Calcium sulfoaluminate cement blended with OPC: A potential binder to encapsulate low-level radioactive slurries of complex chemistry , 2009 .

[36]  Jong-Bin Park,et al.  Characteristics of cement mortar with nano-SiO2 particles , 2007 .

[37]  E. Gartner.  Industrially interesting approaches to “low-CO2” cements ☆ , 2004 .

[38]  J. Ou,et al.  Microstructure of cement mortar with nano-particles , 2004 .

[39]  C. B. Srinivasan,et al.  Development of rapid-set high-strength cement using statistical experimental design , 2003 .

[40]  N. Kouloumbi,et al.  Performance of silica fume-calcium hydroxide mixture as a repair material , 2001 .

[41]  Liang Zhang,et al.  Development of the use of sulfo- and ferroaluminate cements in China , 1999 .