论文信息 - The action of lubricants in metal cutting

The action of lubricants in metal cutting

One important way in which cutting lubricants operate is by reducing the degree of adhesion between the tool rake-face and the freshly formed chip surface. It is suggested that processes of molecular transport within a network of interfacial capillaries play a dominant role in controlling the effectiveness of cutting fluids, providing that they are capable of reaction with, or adsorption into, the metal surfaces.

John A. Williams | John A. Williams

[1] M. C. Shaw. The Metal Cutting Process as a Means of Studying the Properties of Extreme Pressure Lubricants , 1951 .

[2] Hans Ernst,et al. Fundamental Aspects of Metal Cutting and Cutting Fluid Action , 1951 .

[3] F. P. Bowden,et al. The adhesion of clean metals , 1956, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[4] E. Usui,et al. A Photoelastic Analysis of Machining Stresses , 1960 .

[5] G. Boothroyd,et al. Lubricating Action of Cutting Fluids , 1965 .

[6] P. Barlow. Influence of Free Surface Environment on the Shear Zone in Metal Cutting , 1966 .

[7] T. H. C. Childs. Rake Face Action of Cutting Lubricants: An Analysis of, and Experiments on, the Machining of Iron Lubricated by Carbon Tetrachloride , 1972 .

[8] G. Rowe,et al. Physics in metal cutting , 1973 .

[9] David Tabor,et al. Adhesion between clean surfaces at light loads , 1974, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[10] J. A. Bailey,et al. Friction in metal machining—Mechanical aspects , 1975 .

[11] W. F. Hastings,et al. Minimum work as a possible criterion for determining the frictional conditions at the tool/chip interface in machining , 1976, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[12] David Tabor,et al. The role of lubricants in machining , 1977 .