Wavelength dependency of optical 3D measurements at translucent objects using fringe pattern projection

The requirement for a non-transparent Lambertian like surface in optical 3D measurements with fringe pattern projection cannot be satisfied at translucent objects. The translucency causes artifacts and systematic errors in the pattern decoding, which could lead to measurement errors and a decrease of measurement stability. In this work, the influence of light wavelength on 3D measurements was investigated at a stereoscopic system consisting of two filter wheel cameras with narrowband bandpass filters and a projector with a wide-band light source. The experimental results show a significant wavelength dependency of the systematic measurement deviation and the measurement stability.

[1]  Christian Bräuer-Burchardt,et al.  3D shape measurement with phase correlation based fringe projection , 2007, SPIE Optical Metrology.

[2]  Andreas Tünnermann,et al.  Theoretical considerations on aperiodic sinusoidal fringes in comparison to phase-shifted sinusoidal fringes for high-speed three-dimensional shape measurement. , 2015, Applied optics.

[3]  Sai Siva Gorthi,et al.  Fringe projection techniques: Whither we are? , 2010 .

[4]  Peter Kühmstedt,et al.  Fast error simulation of optical 3D measurements at translucent objects , 2012, Other Conferences.

[5]  Peter Kühmstedt,et al.  Monte Carlo simulation of three-dimensional measurements of translucent objects , 2015 .

[6]  Peter Kühmstedt,et al.  Array projection of aperiodic sinusoidal fringes for high-speed three-dimensional shape measurement , 2014 .

[7]  Martin Schaffer,et al.  High-speed pattern projection for three-dimensional shape measurement using laser speckles. , 2010, Applied optics.

[8]  Manuel Rubiño,et al.  Scattering and absorption properties of biomaterials for dental restorative applications , 2013 .

[9]  Gunther Notni,et al.  Accurate Irritation-Free 3D Scanning of Human Face and Body Sequences , 2016 .

[10]  Chen Zhang,et al.  Development and characterization of a high speed linear- moving-stage for multispectral measurements , 2016 .

[11]  Peter Kühmstedt,et al.  GOBO projection-based high-speed three-dimensional shape measurement , 2016, Commercial + Scientific Sensing and Imaging.

[12]  G. Notni,et al.  Measuring error compensation on three-dimensional scans of translucent objects , 2011 .

[13]  Gunther Notni,et al.  A novel 3D multispectral vision system based on filter wheel cameras , 2016, 2016 IEEE International Conference on Imaging Systems and Techniques (IST).

[14]  Zhengyou Zhang,et al.  A Flexible New Technique for Camera Calibration , 2000, IEEE Trans. Pattern Anal. Mach. Intell..

[15]  Bo Fu,et al.  Robust near-infrared structured light scanning for 3D human model reconstruction , 2014, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.