Estimating energy savings from retrofitting existing building systems is traditionally a time intensive process, accomplished by developing a detailed building simulation model, running the model with actual weather data, calibrating the model to actual energy use data, modifying the model to include the proposed changes, then running the base and proposed models with typical weather data to estimate typical energy savings. This paper describes a less time-intensive method of estimating energy savings in industrial buildings using actual monthly energy consumption and weather data. The method begins by developing a multivariate three-parameter changepoint regression model of facility energy use. Next, the change in model parameters is estimated to reflect the proposed energy saving measure. Energy savings are then estimated as the difference between the base and proposed models driven with typical weather data. Use of this method eliminates the need for estimating building parameters, system performance, and operating practices since they are included in the inverse simulation model. It also eliminates the need for model calibration since the inverse model is derived from actual energy use data. The paper describes the development of statistical inverse energy signature models and how to modify the models to estimate savings. Expected savings from inverse simulation are compared to savings predicted by detailed hourly simulation, and sources of error are discussed. Finally, the method is demonstrated in a case study example from the industrial sector. Limitations of the approach for complex building systems and the uncertainty of estimated savings are discussed.
[1]
Kelly Kissock,et al.
Understanding Industrial Energy Use through Sliding Regression Analysis
,
2007
.
[2]
Margaret F. Fels,et al.
Refraction of PRISM results into components of saved energy
,
1986
.
[3]
Ari Rabl.
Parameter estimation in buildings: Methods for dynamic analysis of measured energy use
,
1988
.
[4]
David E. Claridge,et al.
Inverse Model Toolkit: Application and Testing
,
2003
.
[5]
T. A. Reddy,et al.
Uncertainty in baseline regression modeling and in determination of retrofit savings
,
1998
.
[6]
David E. Claridge,et al.
Ambient-temperature regression analysis for estimating retrofit savings in commercial buildings
,
1998
.
[7]
David E. Claridge,et al.
A Change-Point Principal Component Analysis (CP/PCA) Method for Predicting Energy Usage in Commercial Buildings: The PCA Model
,
1993
.
[8]
David E. Claridge,et al.
Inverse Modeling Toolkit: Numerical Algorithms for Best-Fit Variable-Base Degree Day and Change Point Models
,
2003
.