An experimental and numerical study on the mechanical properties of carbon nanotube-latex thin films

Abstract Multi-walled carbon nanotube (MWNT)-latex composite thin films of different MWNT concentrations were fabricated by spraying. Post-fabrication thermal annealing was then conducted on sample sets of different MWNT concentrations, and their microstructure, morphology, and mechanical properties were compared to non-annealed sample sets. The incorporation of MWNTs significantly enhanced the mechanical properties of these nanocomposites at least up to 3 wt%. In addition, annealing altered the microstructure and morphology of the latex matrix, which enhanced the interactions between MWNTs and the polymer, significantly increasing the composite ultimate failure strain and tensile strength. Furthermore, the reinforcing effects of MWNTs on the polymer matrix were investigated using numerical simulations. Stress concentrations were found to initiate at MWNT ends, thus giving rise to yielding fronts that tend to coalesce and propagate across the entire film. The enhancement of the mechanical properties of MWNT-latex nanocomposites, also verified numerically, makes them more suitable for field application as multifunctional coatings or sensors.

[1]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[2]  R. Ruoff,et al.  Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties , 2000, Physical review letters.

[3]  H. Lezec,et al.  Electrical conductivity of individual carbon nanotubes , 1996, Nature.

[4]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[5]  N. Pugno,et al.  A computational model for large deformations of composites with a 2D soft matrix and 1D anticracks , 2015 .

[6]  N. Pugno,et al.  A Hierarchical Lattice Spring Model to Simulate the Mechanics of 2-D Materials-Based Composites , 2015, Front. Mater..

[7]  Oren Regev,et al.  Toolbox for Dispersing Carbon Nanotubes into Polymers To Get Conductive Nanocomposites , 2006 .

[8]  N. Pugno,et al.  Structural reinforcement and failure analysis in composite nanofibers of graphene oxide and gelatin , 2014 .

[9]  Haihui Ye,et al.  Electrospinning of Continuous Carbon Nanotube‐Filled Nanofiber Yarns , 2003 .

[10]  Beale,et al.  Elastic fracture in random materials. , 1988, Physical review. B, Condensed matter.

[11]  Ji Liang,et al.  X-ray diffraction characterization on the alignment degree of carbon nanotubes , 2001 .

[12]  Satish Nagarajaiah,et al.  Nanotube film based on single-wall carbon nanotubes for strain sensing , 2004 .

[13]  Meijie Tang,et al.  Reversible electromechanical characteristics of carbon nanotubes underlocal-probe manipulation , 2000, Nature.

[14]  Zhi‐Kang Xu,et al.  Preparation and properties of the polyimide/multi-walled carbon nanotubes (MWNTs) nanocomposites , 2006 .

[15]  Yongming Liu,et al.  A novel Volume-Compensated Particle method for 2D elasticity and plasticity analysis , 2014 .

[16]  Otto Zhou,et al.  Alignment of carbon nanotubes in a polymer matrix by mechanical stretching , 1998 .

[17]  Kendall E. Atkinson.  An introduction to numerical analysis , 1978 .

[18]  S. Tans,et al.  Room-temperature transistor based on a single carbon nanotube , 1998, Nature.

[19]  Deron A. Walters,et al.  Elastic strain of freely suspended single-wall carbon nanotube ropes , 1999 .

[20]  Qian Wang,et al.  Piezoresistance of carbon nanotubes on deformable thin-film membranes , 2005 .

[21]  G. A. D. Briggs,et al.  Elastic and shear moduli of single-walled carbon nanotube ropes , 1999 .

[22]  H. Dai,et al.  Electromechanical properties of metallic, quasimetallic, and semiconducting carbon nanotubes under stretching. , 2003, Physical review letters.

[23]  J. Coleman,et al.  Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites , 2006 .

[24]  Jonathan N. Coleman,et al.  Mechanical Reinforcement of Polymers Using Carbon Nanotubes , 2006 .

[25]  Huaqing Xie,et al.  Measuring the thermal conductivity of a single carbon nanotube. , 2005, Physical review letters.

[26]  M. Dresselhaus,et al.  Stacking nature of graphene layers in carbon nanotubes and nanofibres , 1997 .

[27]  David Hui,et al.  The revolutionary creation of new advanced materials - Carbon nanotube composites , 2002 .

[28]  N. Kotov,et al.  Multifunctional layer-by-layer carbon nanotube–polyelectrolyte thin films for strain and corrosion sensing , 2007 .

[29]  K. Schulte,et al.  Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content , 2004 .