Experimental investigation on the effects of cold expansion of fastener holes

A series of experimental investigations concerning the residual stress fields at cold-expanded fastener holes and of the behavior of fatigue cracks at such holes has been conducted. These studies have included measurement of the initial, cold-work-induced residual stress fields at both uncracked and cracked holes and the performance of both constant amplitude and spectrum fatigue crack growth tests.

[1]  R. Forman,et al.  Numerical Analysis of Crack Propagation in Cyclic-Loaded Structures , 1967 .

[2]  G. J. Petrak,et al.  Retardation of cracks emanating from fastener holes , 1974 .

[3]  R. G. Forman,et al.  Elastic-plastic analysis of an infinite sheet having a circular hole under pressure , 1975 .

[4]  P. Toor.  Cracks emanating from precracked coldworked holes , 1976 .

[5]  J. M. Potter,et al.  Stress Measurements on Cold-Worked Fastener Holes , 1976 .

[6]  Lf Impellizzeri,et al.  Fatigue Analysis of Cold-Worked and Interference Fit Fastener Holes , 1977 .

[7]  W. N. Sharpe,et al.  Measurement of the Elastic-Plastic Boundary Around Coldworked Fastener Holes , 1978 .

[8]  William N. Sharpe,et al.  An experimental study of fatigue crack initiation and growth from coldworked holes , 1979 .

[9]  D. P. Rooke,et al.  GREEN'S FUNCTIONS IN FRACTURE MECHANICS , 1979 .

[10]  R. Forman,et al.  Green's function for a crack emanating from a circular hole in an infinite sheet , 1980 .

[11]  W. H. Cathey,et al.  Fracture Mechanics Consideration of Residual Stresses Introduced by Coldworking Fastener Holes , 1980 .

[12]  C. Ruud,et al.  Nondestructive and Semidestructive Methods for Residual Stress Measurement , 1982 .

[13]  J. B. Chang,et al.  Improved damage-tolerance analysis methodology , 1984 .

[14]  Mw Ozelton,et al.  Fatigue Life Improvement by Cold Working Fastener Holes in 7050 Aluminum , 1986 .

[15]  Ma Landy,et al.  Enhanced Stop-Drill Repair Procedure for Cracked Structures , 1986 .

[16]  J. Y. Mann,et al.  FATIGUE OF THICK‐SECTION COLD‐EXPANDED HOLES WITH AND WITHOUT CRACKS , 1989 .

[17]  R. J. Sanford,et al.  Holographic measurement of the elastic–plastic boundary surrounding cold-expanded holes , 1989 .

[18]  J. F. Williams,et al.  Analysis of cold-expansion for cracked and uncracked fastener holes , 1991 .

[19]  B. Dattaguru,et al.  A method for estimation of the radius of elastic-plastic boundary around cold-worked holes , 1992 .

[20]  D. L. Ball,et al.  ELASTIC‐PLASTIC STRESS ANALYSIS OF COLD EXPANDED FASTENER HOLES , 1995 .