Effects of water vapor and oxygen on non-fullerene small molecule acceptors

Tolerance of non-fullerene acceptors to water vapor, oxygen and thermal stress was investigated by photoelectron spectroscopy via the in situ method.

[1]  Yong Cao,et al.  Organic and solution-processed tandem solar cells with 17.3% efficiency , 2018, Science.

[2]  Yang Yang,et al.  Next-generation organic photovoltaics based on non-fullerene acceptors , 2018 .

[3]  Xianjie Liu,et al.  Relationship of Ionization Potential and Oxidation Potential of Organic Semiconductor Films Used in Photovoltaics , 2018, Solar RRL.

[4]  Stephen R. Forrest,et al.  High fabrication yield organic tandem photovoltaics combining vacuum- and solution-processed subcells with 15% efficiency , 2018 .

[5]  Hui Li,et al.  Thermostable single-junction organic solar cells with a power conversion efficiency of 14.62. , 2018, Science bulletin.

[6]  Yang Yang,et al.  Low-bandgap conjugated polymers enabling solution-processable tandem solar cells , 2017 .

[7]  Xianjie Liu,et al.  Ternary organic solar cells with enhanced open circuit voltage , 2017 .

[8]  H. Sirringhaus,et al.  High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives. , 2017, Nature materials.

[9]  C. J. M. Emmott,et al.  Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells. , 2017, Nature materials.

[10]  Fuzhi Huang,et al.  Print flexible solar cells , 2016, Nature.

[11]  Yongfang Li,et al.  Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells. , 2016, Journal of the American Chemical Society.

[12]  Long Ye,et al.  Energy‐Level Modulation of Small‐Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells , 2016, Advanced materials.

[13]  Alberto Salleo,et al.  High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor , 2016, Nature Communications.

[14]  Luping Yu,et al.  Covalently Bound Clusters of Alpha-Substituted PDI-Rival Electron Acceptors to Fullerene for Organic Solar Cells. , 2016, Journal of the American Chemical Society.

[15]  K. Svensson,et al.  Photodegradation of the electronic structure of PCBM and C60 films in air , 2016 .

[16]  Pei Cheng,et al.  Stability of organic solar cells: challenges and strategies. , 2016, Chemical Society reviews.

[17]  Yongfang Li,et al.  Non-Fullerene Polymer Solar Cells Based on Alkylthio and Fluorine Substituted 2D-Conjugated Polymers Reach 9.5% Efficiency. , 2016, Journal of the American Chemical Society.

[18]  Yanming Sun,et al.  A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency. , 2016, Journal of the American Chemical Society.

[19]  Matthew Y. Sfeir,et al.  Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells , 2015, Nature Communications.

[20]  Itaru Osaka,et al.  Efficient inverted polymer solar cells employing favourable molecular orientation , 2015, Nature Photonics.

[21]  Feng Liu,et al.  Single-junction polymer solar cells with high efficiency and photovoltage , 2015, Nature Photonics.

[22]  O. Eriksson,et al.  The influence of oxygen adsorption on the NEXAFS and core-level XPS spectra of the C60 derivative PCBM. , 2015, The Journal of chemical physics.

[23]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[24]  Yu-Shan Cheng,et al.  Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer , 2014, Scientific Reports.

[25]  T. Nagai,et al.  Arl3 and LC8 regulate dissociation of dynactin from dynein , 2014, Nature Communications.

[26]  Oskar J. Sandberg,et al.  Trap‐Assisted Recombination via Integer Charge Transfer States in Organic Bulk Heterojunction Photovoltaics , 2014 .

[27]  Norbert Koch,et al.  Organic semiconductor density of states controls the energy level alignment at electrode interfaces , 2014, Nature Communications.

[28]  Xianjie Liu,et al.  Oxygen‐ and Water‐Based Degradation in [6,6]‐Phenyl‐C61‐Butyric Acid Methyl Ester (PCBM) Films , 2014 .

[29]  Wendimagegn Mammo,et al.  25th Anniversary Article: Isoindigo‐Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors , 2014, Advanced materials.

[30]  Yu-Shan Cheng,et al.  Fullerene Derivative‐Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low‐Bandgap Polymer (PTB7‐Th) for High Performance , 2013, Advanced materials.

[31]  L. Ley,et al.  Calculating the Universal Energy‐Level Alignment of Organic Molecules on Metal Oxides , 2013 .

[32]  Won Ho Jo,et al.  Degradation and stability of polymer-based solar cells , 2012 .

[33]  P. Blom,et al.  Unification of trap-limited electron transport in semiconducting polymers. , 2012, Nature materials.

[34]  Henning Sirringhaus,et al.  Spectroscopic investigation of oxygen- and water-induced electron trapping and charge transport instabilities in n-type polymer semiconductors. , 2012, Journal of the American Chemical Society.

[35]  Suren A. Gevorgyan,et al.  Stability of Polymer Solar Cells , 2012, Advanced materials.

[36]  Yongfang Li.  Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[37]  R. Österbacka,et al.  Spontaneous Charge Transfer and Dipole Formation at the Interface Between P3HT and PCBM , 2011 .

[38]  Ying Wang,et al.  Effect of oxygen on the electronic structure of highly crystalline picene films. , 2011, Journal of the American Chemical Society.

[39]  G. Brocks,et al.  Fermi level pinning by integer charge transfer at electrode-organic semiconductor interfaces , 2011 .

[40]  Mario Leclerc,et al.  Processable Low-Bandgap Polymers for Photovoltaic Applications† , 2011 .

[41]  Garry Rumbles,et al.  Photoinduced Degradation of Polymer and Polymer–Fullerene Active Layers: Experiment and Theory , 2010 .

[42]  Chain‐Shu Hsu,et al.  Synthesis of conjugated polymers for organic solar cell applications. , 2009, Chemical reviews.

[43]  William R. Salaneck,et al.  Energy‐Level Alignment at Organic/Metal and Organic/Organic Interfaces , 2009 .

[44]  A. Facchetti,et al.  Design, synthesis, and characterization of ladder-type molecules and polymers. Air-stable, solution-processable n-channel and ambipolar semiconductors for thin-film transistors via experiment and theory. , 2009, Journal of the American Chemical Society.

[45]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[46]  W. R. Salaneck,et al.  Electronic structure of hybrid interfaces for polymer-based electronics , 2007, Journal of physics. Condensed matter : an Institute of Physics journal.

[47]  J. Gardette,et al.  Photo- and thermal degradation of MDMO-PPV:PCBM blends , 2007 .

[48]  W. R. Salaneck,et al.  The interaction of poly (p-phenylenevinylene) with air† , 1996 .

[49]  G. Granucci,et al.  Benzene—O2 interaction potential from ab initio calculations , 1993 .

[50]  S. Jenekhe,et al.  Nonfullerene Polymer Solar Cells with 8.5% Efficiency Enabled by a New Highly Twisted Electron Acceptor Dimer , 2016, Advanced materials.

[51]  Eric J. Sawyer,et al.  Mechanical degradation and stability of organic solar cells: molecular and microstructural determinants , 2015 .

[52]  W. R. Salaneck,et al.  Photo‐oxidation of poly(p‐phenylenevinylene) , 1997 .