Optimal design of deteriorating timber components under climate variations

The mechanical and physical properties of timber structures could be affected by a combination of loading, moisture content, temperature, biological activity, etc. This paper focuses on the optimal design of new timber structures subjected to fungal decay. Among the optimization methods available in the literature, this study considers a Time-Dependent Reliability Based-Design Optimization (TD-RBDO) approach. The TD-RBDO aims at ensuring a target reliability level during the operational life by considering deterioration and the uncertainties related inherent to materials properties, models and climate. This approach is applied to design optimization of a timber truss subjected to an aggressive (very humid) French climate. The performance of the optimized solution is compared, in terms of safety, with solutions estimated from Deterministic Design Optimization (DDO) and Reliability-Based Design Optimization (RBDO) approaches. The overall results indicate that the optimized solution of TD-RBDO reduces ensures a target reliability level during the whole structural lifetime.

[1]  Chi-Hsiang Wang,et al.  Design of Exposed Timber Structures , 2009 .

[2]  Sven Thelandersson,et al.  Modelling the outdoor performance of wood products - A review on existing approaches , 2014 .

[3]  Carlito Calil Junior,et al.  Mathematical model for timber decay in contact with the ground adjusted for the state of São Paulo, Brazil , 2010 .

[4]  Xiaoping Du,et al.  Sequential Optimization and Reliability Assessment Method for Efficient Probabilistic Design , 2004, DAC 2002.

[5]  P. Méausoone,et al.  FE analysis and geometrical optimization of timber beech finger-joint under bending test , 2014 .

[6]  Simon Šilih,et al.  Optimum design of plane timber trusses considering joint flexibility , 2005 .

[7]  Yue Li,et al.  Reliability assessment of power pole infrastructure incorporating deterioration and network maintenance , 2014, Reliab. Eng. Syst. Saf..

[8]  Emilio Bastidas-Arteaga,et al.  Optimal design of corroded reinforced concrete structures by using time-variant reliability analysis , 2009 .

[9]  Paulo B. Lourenço,et al.  In situ measured cross section geometry of old timber structures and its influence on structural safety , 2013 .

[10]  Alaa Chateauneuf,et al.  Benchmark study of numerical methods for reliability-based design optimization , 2010 .

[11]  Sven Thelandersson,et al.  Development of decay performance models for outdoor timber structures , 2013 .

[12]  Alaa Chateauneuf,et al.  Reliability-Based Design of Structures Under Seismic Loading: Application to Timber Structures , 2011 .

[13]  H. Viitanen,et al.  Towards modelling of decay risk of wooden materials , 2010, European Journal of Wood and Wood Products.

[14]  Simon Šilih,et al.  Optimal design of single-story steel building structures based on parametric MINLP optimization , 2013 .

[15]  Paulo B. Lourenço,et al.  Characterization of Cross-Sections from Old Chestnut Beams Weakened by Decay , 2014 .

[16]  Michael Havbro Faber,et al.  Probabilistic modeling of timber structures , 2005 .

[17]  Paulo B. Lourenço,et al.  Reliability analysis of a timber truss system subjected to decay , 2013 .

[18]  Antonio Tomás,et al.  Shape and size optimisation of concrete shells , 2010 .