Autonomous surface inspection of wind turbine blades for quality assurance in production

This paper defines a method, and associated automated system, for production inline inspection of the surface geometry of wind turbine blades which can be plugged directly into existing production facilities without changing the setup. During current production, turbine blades are manually inspected, and this system aims at automating this process. Various geometrical defects can occur in the surface during production and these defects can lead to shortened life times and lowered power output of the turbine. Automating the inspection process requires a method which is at least as sensitive as the currently used manual process while significantly lowering the time consumption. It is shown that the proposed method is fast and has the potential to deliver the high precision and resolution needed to resolve both small and large scale surface defects.

[1]  Mariusz Pawlak,et al.  Optimisation of wind turbine blades , 2005 .

[2]  T. Luhmann,et al.  Measurement of Rotor Blade Deformations of Wind Energy Converters with Laser Scanners , 2013 .

[3]  William T. Estler,et al.  Advances in Large-Scale Metrology – Review and future trends , 2016 .

[4]  Paul J. Besl,et al.  A Method for Registration of 3-D Shapes , 1992, IEEE Trans. Pattern Anal. Mach. Intell..

[5]  Qing Wang,et al.  Investigating the measurement of offshore wind turbine blades using coherent laser radar , 2016 .

[6]  Yuri Petryna,et al.  Fault Detection and State Evaluation of Rotor Blades , 2014 .

[7]  Ronghua Liang,et al.  Hand-eye calibration with a new linear decomposition algorithm , 2008 .

[8]  Boris Otto,et al.  Design Principles for Industrie 4.0 Scenarios , 2016, 2016 49th Hawaii International Conference on System Sciences (HICSS).

[9]  Paul J. Besl,et al.  Method for registration of 3-D shapes , 1992, Other Conferences.

[10]  Milan Curkovic,et al.  Classification of 3D shape deviation using feature recognition operating on parameterization control points , 2014, Comput. Ind..

[11]  Kuang-Chao Fan,et al.  Innovative optical scanning technique and device for three-dimensional full-scale measurement of wind-turbine blades , 2014 .

[12]  André Voet,et al.  Optical measurement techniques for mobile and large scale dimensional metrology , 2007 .

[13]  Jakob Wilm,et al.  PRECISION AND ACCURACY PARAMETERS IN STRUCTURED LIGHT 3-D SCANNING , 2016 .

[14]  Steven D. Hand,et al.  Dimensional Measurement of a Composite Ship Hull Using Coherent Laser Radar Yielding Submillimeter Results , 2004 .

[15]  Frank Dellaert,et al.  Out-of-Core Bundle Adjustment for Large-Scale 3D Reconstruction , 2007, 2007 IEEE 11th International Conference on Computer Vision.

[16]  Paul G. Maropoulos,et al.  Recent developments in large-scale dimensional metrology , 2009 .

[17]  Kaspar Althoefer,et al.  An Integrated Method for the Geometric Inspection of Wind Turbine Hubs with Industrial Robot , 2016 .

[18]  Hongling Wang,et al.  Arc-Length Parameterized Spline Curves for Real-Time Simulation , 2003 .

[19]  Roger Holden,et al.  Offshore wind turbine blades measurement using Coherent Laser Radar , 2016 .

[20]  Enrico Savio,et al.  Geometrical metrology and machine testing , 2015 .

[21]  William T. Estler,et al.  Large-Scale Metrology – An Update , 2002 .

[22]  Peter J. Schubel,et al.  Cost modelling in polymer composite applications: Case study – Analysis of existing and automated manufacturing processes for a large wind turbine blade , 2012 .