Formability of dual phase steels in electrohydraulic forming

Abstract Electrohydraulic forming (EHF) is based upon the electro-hydraulic effect: a complex phenomenon related to the discharge of high voltage electrical current through a liquid. In EHF, electrical energy is stored in a bank of capacitors and is converted into the kinetic energy needed to form sheet metal by rapidly discharging that energy across a pair of electrodes submerged in a fluid. The objective of this paper is to report the results of formability testing of dual phase steels in EHF conditions and to provide an explanation of the observed formability improvement based on analysis of the experimental results and through the use of a modeling technique developed as part of this work for simulating the EHF process. Comparison of the maximum strains resulting from EHF into a conical die and a v-shape die to the maximum strains resulting from quasistatic LDH testing (limiting dome height) indicated that substantially higher strains can be accomplished in the EHF process. In order to obtain the maximum benefits of increased formability with EHF technology, it is necessary to get to the high strain rate regime and the accompanying high hydrostatic stresses in the sheet, which occurs mostly in the contact area between the blank and the die. If the blank decelerates and gets to quasistatic forming conditions before filling the die cavity completely, very limited improvement in formability can be anticipated. A numerical model of the EHF process has been developed, incorporating four distinct models that are integrated into one: (1) an electrical model of the discharge channel, (2) a model of the plasma channel, (3) a model for the liquid as a pressure-transmitting medium, and (4) a deformable sheet metal blank in contact with a rigid die. The relative improvement in plane strain formability in EHF conditions was between 63% and 190%, depending on the grade of dual phase steel. Numerical modeling showed that the peak strain rates occurring in EHF are approximately 20,000 units per second.

[1]  A. Tekkaya,et al.  Electromagnetic forming—A review , 2011 .

[2]  D. C. Drucker,et al.  A DEFINITION OF STABLE INELASTIC MATERIAL , 1957 .

[3]  G. V. Stepanov,et al.  Influence of loading rate on the mechanical properties of steels of different strength levels , 1989 .

[4]  E. J. Bruno,et al.  High-velocity forming of metals , 1968 .

[5]  Glenn S. Daehn,et al.  Effect of velocity on flow localization in tension , 1996 .

[6]  Richard W. Davies,et al.  Electro-hydraulic forming of sheet metals: Free-forming vs. conical-die forming , 2012 .

[7]  M. Finn,et al.  Electromagnetic forming of aluminum alloy sheet: Free-form and cavity fill experiments and model , 2005 .

[8]  Glenn S. Daehn,et al.  Hyperplasticity: Increased forming limits at high workpiece velocity , 1994 .

[9]  Richard W. Davies,et al.  Experimental Characterization of Sheet Metal Deformation During Electro-Hydraulic Forming , 2011 .

[10]  Javad Samei,et al.  Quantitative Microstructural Analysis of Formability Enhancement in Dual Phase Steels Subject to Electrohydraulic Forming , 2013, Journal of materials engineering and performance (Print).

[11]  A. A. Ezra,et al.  Principles and practice of explosive metalworking , 1973 .

[12]  Sergey Fedorovich Golovashchenko,et al.  The Effect of Tool–Sheet Interaction on Damage Evolution in Electromagnetic Forming of Aluminum Alloy Sheet , 2005 .

[13]  Lorenzo M. Smith,et al.  A new experimental approach for obtaining diffuse-strain flow stress curves , 2009 .

[14]  D. Mynors,et al.  Applications and capabilities of explosive forming , 2002 .

[15]  A Visual Technique to Determine the Forming Limit for Sheet Materials , 2002 .

[16]  Bijan Mollaei Dariani,et al.  Experimental investigation of sheet metal formability under various strain rates , 2009 .

[17]  G. Hudson.  A Theory of the Dynamic Plastic Deformation of a Thin Diaphragm , 1951 .

[18]  Enhanced formability of interstitial free iron at high strain rates , 1992 .

[19]  K. S. Raghavan,et al.  Recent Progress in the Development of Forming Limit Curves for Automotive Sheet Steels , 1992 .

[20]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[21]  Glenn S. Daehn,et al.  Formability of steel sheet in high velocity impact , 2005 .

[22]  Sergey Fedorovich Golovashchenko,et al.  Two-step method of forming complex shapes from sheet metal , 2011 .

[23]  Lynette Cheah,et al.  Meeting U.S. passenger vehicle fuel economy standards in 2016 and beyond , 2011 .

[24]  Sergey Fedorovich Golovashchenko,et al.  Material Formability and Coil Design in Electromagnetic Forming , 2007 .