Controlled Flight Maneuvers of a Flapping Wing Micro Air Vehicle: a Step Towards the Delfly II Identification

The Delfly II Flapping Wing Micro Air Vehicle was flown in an external tracking chamber. It was possible to perform controlled flight-test maneuvers with an ornithopter that is capable of hover and forward flight, for system identification purposes. This was achieved by programming its autopilot to deflect the a control surface, while keeping the other surfaces at trimmed condition. Step, doublet and triplet inputs of 1/3, 2/3 and 4/3 of a second on the elevator, rudder and flapping frequency actuators were performed to excite the Delfly’s eigenmodes. These tests were carried out at different flight speeds, ranging from -0.5 to 8 m/s and with the ornithopter’s center of gravity at 83%, 74%, 44% and 42% of the wing root chord. As a result, it was possible to cover the Delfly’s flight envelope and collect data that will be used to build a dynamic and aerodynamic model of the Delfly. The selected inputs have shown to excite the Delfly in dampened oscillatory modes that can be compared to phugoid and short period for the longitudinal dynamics. The Delfly is highly affected by the rudder deflections. The results also reveal an unstable lateral mode similar to a spiral.

[1]  Kevin Knowles,et al.  Insectlike Flapping Wings in the Hover Part II: Effect of Wing Geometry , 2008 .

[2]  Inderjit Chopra,et al.  Dynamics of Insect-Based Flapping Wings: Loads Validation , 2006 .

[3]  Shijun Guo,et al.  Design, Experiment and Aerodynamic Calculation of a Flapping Wing Rotor Micro Aerial Vehicle , 2011 .

[4]  Cornelis C. de Visser.  Global Nonlinear Model Identification with Multivariate Splines , 2011 .

[5]  Anouck Girard,et al.  Averaging of the Nonlinear Dynamics of Flapping Wing Micro Air Vehicles for Symmetrical Flapping , 2011 .

[6]  Peretz P. Friedmann,et al.  Approximate Aerodynamic and Aeroelastic Modeling of Flapping Wings in Hover and Forward Flight , 2011 .

[7]  Mayuresh J. Patil,et al.  Influence of Wing Flexibility on the Stability of Flapping Flight , 2010 .

[8]  Inderjit Chopra,et al.  Insect-Based Hover-Capable Flapping Wings for Micro Air Vehicles: Experiments and Analysis , 2008 .

[9]  A Morelli Eugene.  Flight Test Validation of Optimal Input Design and Comparison to Conventional Inputs , 1997 .

[10]  Anouck Girard,et al.  Modeling and Simulation of Nonlinear Dynamics of Flapping Wing Micro Air Vehicles , 2011 .

[11]  Sergey V Shkarayev,et al.  Kinematics of free-flight ornithopters , 2012 .

[12]  J. A. Mulder,et al.  Differential constraints for bounded recursive identification with multivariate splines , 2011, Autom..

[13]  C. C. de Visser,et al.  Rigid-Body Kinematics Versus Flapping Kinematics of a Flapping Wing Micro Air Vehicle , 2015 .

[14]  Christian Ghiaus,et al.  Gray-box state-space model and parameter identification of desiccant wheels , 2013 .

[15]  Effects of flexibility on the aerodynamic performance of flapping wings , 2011, Journal of Fluid Mechanics.

[16]  Jishnu Keshavan,et al.  Design and Development of a High Frequency Biologically Inspired Flapping Wing Mechanism , 2007 .

[17]  J. A. Mulder,et al.  A new approach to linear regression with multivariate splines , 2009, Autom..

[18]  Eugene A. Morelli,et al.  Optimal Input Design for Aircraft Parameter Estimation using Dynamic Programming Principles , 1990 .

[19]  Guido C. H. E. de Croon,et al.  Autonomous Wind Tunnel Free-Flight of a Flapping Wing MAV , 2013 .

[20]  R. Zbikowski,et al.  Insectlike Flapping Wings in the Hover Part I: Effect of Wing Kinematics , 2008 .