An Input Shaping Method Based on System Output

In this paper, an input shaping method is proposed. This method only requires the system output, and doesn't need the system model information. In the application of this method, the basic form of an input shaping filter is first decided, then according to the form of the filter, the system output is decomposed into several weighted signals. Based on the decomposition, the least square method is applied to minimize the difference between the actual system output and the reference system output. In this way, the vibration in the system output is eliminated and the desired bandwidth of the whole system can be fulfilled. Copyright © 2014 IFSA Publishing, S. L.

[1]  Wu Li.  OPTIMAL TRAJECTORY PLANNING OF FLEXIBLE SPACE ROBOT FOR VIBRATION REDUCING , 2003 .

[2]  Miguel Ayala Botto,et al.  Vibration control of a very flexible manipulator system , 2005 .

[3]  Liu Hong.  Vibration Suppression for the Flexible Joint with Torque Sensor , 2011 .

[4]  E. Bautista,et al.  Input shaping reference commands for trajectory following Cartesian machines , 2005 .

[5]  Anthony Tzes,et al.  Experiments on Rigid Body Based Controllers with Input Preshaping for a Two-Link Flexible Manipulator , 1992 .

[6]  Mustafa Arafa,et al.  Design and optimization of input shapers for liquid slosh suppression , 2009 .

[7]  Lucy Y. Pao,et al.  Input shaping and time-optimal control of flexible structures , 2003, Autom..

[8]  Paolo Pennacchi,et al.  Pre-shaping motion input for a rotating flexible link , 2001 .

[9]  Kuo-Shen Chen,et al.  Design of command shapers for residual vibration suppression in Duffing nonlinear systems , 2009 .

[10]  Matthew O. T. Cole,et al.  Optimal FIR input shaper designs for motion control with zero residual vibration , 2011 .

[11]  Warren P. Seering,et al.  Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs , 1994 .

[12]  Matthew O. T. Cole.  A class of low-pass FIR input shaping filters achieving exact residual vibration cancelation , 2012, Autom..

[13]  Warren P. Seering,et al.  Preshaping Command Inputs to Reduce System Vibration , 1990 .

[14]  S. Skogestad.  Simple analytic rules for model reduction and PID controller tuning , 2004 .

[15]  J. G. Ziegler,et al.  Optimum Settings for Automatic Controllers , 1942, Journal of Fluids Engineering.

[16]  Li Chen,et al.  Robust Backstepping Control Based on State Observer and Elastic Vibration Suppressing of Free-Floating Space Manipulator with Flexible Joints , 2012 .

[17]  Lucy Y. Pao,et al.  Discrete time-optimal command shaping , 2007, Autom..

[18]  Ioannis Antoniadis,et al.  Maximally Robust Input Preconditioning for Residual Vibration Suppression Using Low-Pass FIR Digital Filters , 2002 .

[19]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[20]  William E. Singhose,et al.  Command-induced vibration analysis using input shaping principles , 2008, Autom..