Determination of heat transfer coefficients at metal/chill interface in the casting solidification process

[1]  Parviz Davami,et al.  Effect of pressure on heat transfer coefficient at the metal/mold interface of A356 aluminum alloy☆ , 2012 .

[2]  Luoxing Li,et al.  Inverse identification of interfacial heat transfer coefficient between the casting and metal mold using neural network , 2010 .

[3]  Jacek Smolka,et al.  An effective 3-D inverse procedure to retrieve cooling conditions in an aluminium alloy continuous casting problem , 2010 .

[4]  Z. Cui,et al.  Application of orthogonal experimental design and Tikhonov regularization method for the identification of parameters in the casting solidification process , 2009 .

[5]  Daan M. Maijer,et al.  Development of a 3-D thermal model of the low-pressure die-cast (LPDC) process of A356 aluminum alloy wheels , 2007 .

[6]  A. Hamasaiid,et al.  Effect of Mold Coating Materials and Thickness on Heat Transfer in Permanent Mold Casting of Aluminum Alloys , 2007 .

[7]  L. Chao,et al.  Analysis of interfacial heat transfer coefficient of green sand mold casting for aluminum and tin-lead alloys by using a lump capacitance method , 2007 .

[8]  M. D. Ciano,et al.  Measurement of primary region heat transfer in horizontal direct chill continuous casting of aluminum alloy re-melt ingots , 2007 .

[9]  S.M.H. Mirbagheri,et al.  Modeling of metalo-static pressure on the metal–mould interface thermal resistance in the casting process , 2007 .

[10]  Abdel Magid Hamouda,et al.  Numerical simulation of casting solidification in permanent metallic molds , 2006 .

[11]  Mohamed S. Gadala,et al.  An FE‐based sequential inverse algorithm for heat flux calculation during impingement water cooling , 2006 .

[12]  H. Şahin,et al.  Determination of unidirectional heat transfer coefficient during unsteady-state solidification at metal casting-chill interface , 2006 .

[13]  Anthony T. Patera,et al.  Inverse identification of thermal parameters using reduced-basis method , 2005 .

[14]  T. Kumar,et al.  Estimation of multiple heat-flux components at the metal/mold interface in bar and plate aluminum alloy castings , 2004 .

[15]  Marcelo de Aquino Martorano,et al.  Heat transfer coefficient at the metal–mould interface in the unidirectional solidification of Cu–8%Sn alloys , 2000 .

[16]  Bai Pu.  MEASUREMENT OF HEAT TRANSFER COEFFICIENT AT METAL/MOLD(CHILL) INTERFACE DURING CASTING , 1999 .

[17]  Taegyu Kim,et al.  Time-varying Heat Transfer Coefficients between Tube-Shaped Casting and Metal Mold , 1997 .

[18]  D. Caulk,et al.  A New Method for Thermal Analysis of Die Casting , 1993 .

[19]  B. Blackwell,et al.  Inverse Heat Conduction: Ill-Posed Problems , 1985 .