Routing Metrics Used for Path Calculation in Low-Power and Lossy Networks

Low power and Lossy Networks (LLNs) have unique characteristics compared with traditional wired and ad-hoc networks that require the specification of new routing metrics and constraints. By contrast with typical Interior Gateway Protocol (IGP) routing metrics using hop counts or link metrics, this document specifies a set of link and node routing metrics and constraints suitable to LLNs.

[1]  Scott O. Bradner,et al.  Key words for use in RFCs to Indicate Requirement Levels , 1997, RFC.

[2]  Ross W. Callon,et al.  Use of OSI IS-IS for routing in TCP/IP and dual environments , 1990, RFC.

[3]  Thomas Narten,et al.  Guidelines for Writing an IANA Considerations Section in RFCs , 1998, RFC.

[4]  Kristofer S. J. Pister,et al.  Industrial Routing Requirements in Low-Power and Lossy Networks , 2009, RFC.

[5]  Pascal Thubert,et al.  Objective Function Zero for the Routing Protocol for Low-Power and Lossy Networks (RPL) , 2012, RFC.

[6]  John Moy,et al.  OSPF Version 2 , 1998, RFC.

[7]  Jp Vasseur,et al.  Terminology in Low power And Lossy Networks , 2008 .

[8]  Jakob Buron,et al.  Home Automation Routing Requirements in Low-Power and Lossy Networks , 2008, RFC.

[9]  A. Khanna,et al.  Performance of the revised routing metric in the ARPANET and MILNET , 1989, IEEE Military Communications Conference, 'Bridging the Gap. Interoperability, Survivability, Security'.

[10]  Daniel O. Awduche,et al.  Requirements for Traffic Engineering Over MPLS , 1999, RFC.

[11]  Vijay Srinivasan,et al.  RSVP-TE: Extensions to RSVP for LSP Tunnels , 2001, RFC.

[12]  Siarhei Kuryla,et al.  RPL: IPv6 Routing Protocol for Low power and Lossy Networks , 2010 .

[13]  Tim Winter,et al.  Routing Requirements for Urban Low-Power and Lossy Networks , 2009, RFC.

[14]  Jerald Martocci,et al.  Building Automation Routing Requirements in Low-Power and Lossy Networks , 2010, RFC.