Real world application of angular scan pulse-echo ultrasonic propagation imager for damage tolerance evaluation of full-scale composite fuselage

Composite structures are assertively used for new airframe designs and manufacturing in military aircrafts because of superior strength-to-weight ratios and fatigue resistance. Because the composites have different fatigue failure characteristics compared with metals, it is necessary to develop different approaches for the composite fatigue design and testing. In this study, we propose an in situ damage evaluation technology with high spatial resolution during full-scale fatigue testing of composite aircraft structures. For real composite structure development considering composite fatigue characteristics, full-scale fatigue and damage tolerance tests of the composite fuselage structure were conducted to evaluate the structural characteristics. In the meantime, the laser ultrasonic nondestructive inspection method, called an angular scan pulse-echo ultrasonic propagation imager, which is fully noncontact, real-time, and portable to position it in between the complex test rigs, is used to observe in situ damage growth of the composite. Finally, the verification procedure assisted by the angular scan pulse-echo ultrasonic propagation imager assures no growth of the initial impact damages after lifetime operation and proves the damage tolerance capability of the developed composite fuselage structure.

[1]  Jung-Ryul Lee,et al.  Development of single channeled serial-connected piezoelectric sensor array and damage visualization based on multi-source wave propagation imaging , 2016 .

[2]  Jeong-Beom Ihn,et al.  In-situ NDE of Composite Repair Patch and Thick Panel with Substructures using Mobile Pulse-Echo Ultrasonic Propagation Imager , 2017 .

[3]  Lloyd V. Smith,et al.  An investigation of matrix damage in composite laminates using continuum damage mechanics , 2015 .

[4]  Robert C. Wetherhold,et al.  Damage and Failure of Composite Materials , 2014 .

[5]  A. Thionnet.  From Fracture to Damage Mechanics: A behavior law for microcracked composites using the concept of Crack Opening Mode , 2010 .

[6]  Jung-Ryul Lee,et al.  In situ non-destructive evaluation of an aircraft UHF antenna radome based on pulse-echo ultrasonic propagation imaging , 2017 .

[7]  Jung-Ryul Lee,et al.  Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: Algorithm , 2012 .

[8]  A. Varvani-Farahani,et al.  Damage Assessment of CFRP [90/±45/0] Composite Laminates over Fatigue Cycles , 2011 .

[9]  Ramesh Talreja,et al.  Damage and fatigue in composites – A personal account , 2008 .

[10]  Jung-Ryul Lee,et al.  High-speed angular-scan pulse-echo ultrasonic propagation imager for in situ non-destructive evaluation , 2018 .

[11]  Rinze Benedictus,et al.  Methods for the prediction of fatigue delamination growth in composites and adhesive bonds: A critical review , 2013 .

[12]  Pedro P. Camanho,et al.  Matrix cracking and delamination in laminated composites. Part I: Ply constitutive law, first ply failure and onset of delamination , 2011 .