Experimental investigation on the convective heat transfer of nanofluid flow inside vertical helically coiled tubes under uniform wall temperature condition

Abstract In this study, heat transfer enhancement of a nanofluid flow inside vertical helically coiled tubes has been investigated experimentally in the thermal entrance region. The temperature of the tube wall was kept constant at around 95 °C to have isothermal boundary condition. Experiments were conducted for fluid flow inside straight and helical tubes. In these experiments, the effects of a wide range of different parameters such as Reynolds and Dean numbers, geometrical parameters and nanofluid weight fractions have been studied. In order to investigate the effect of the fluid type on the heat transfer, pure heat transfer oil and nanofluids with weight concentrations of 0.1, 0.2 and 0.4% were utilized as the working fluid. The thermo-physical properties of the working fluids were extremely temperature dependent; therefore, rough correlations were proposed to predict their properties. Based on the experimental data, utilizing helical coiled tubes instead of straight ones enhances the heat transfer rate remarkably. Besides, nanofluid flows showed much higher Nusselt numbers compared to the base fluid flow. Finally, it was observed that combination of the two enhancing methods has a noticeably high capability to the heat transfer rate.

[1]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[2]  Huaqing Xie,et al.  Investigation of thermal conductivity and viscosity of ethylene glycol based ZnO nanofluid , 2009 .

[3]  Yang Li,et al.  Investigation on the thermal transport properties of ethylene glycol-based nanofluids containing copper nanoparticles , 2010 .

[4]  Paisarn Naphon,et al.  Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins , 2007 .

[5]  Mohammad Reza Salimpour,et al.  Heat transfer characteristics of a temperature-dependent-property fluid in shell and coiled tube heat exchangers , 2008 .

[6]  Saeed Zeinali Heris,et al.  EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER OF AL2O3/WATER NANOFLUID IN CIRCULAR TUBE , 2007 .

[7]  S. Kakaç,et al.  Review of convective heat transfer enhancement with nanofluids , 2009 .

[8]  S. J. Kline,et al.  Describing Uncertainties in Single-Sample Experiments , 1953 .

[9]  C. J. Hoogendoorn,et al.  Laminar convective heat transfer in helical coiled tubes , 1978 .

[10]  E. Grulke,et al.  Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow , 2005 .

[11]  M. Esfahany,et al.  Experimental study of turbulent convective heat transfer and pressure drop of dilute CuO/water nanofluid inside a circular tube , 2010 .

[12]  Edward W. Merrill,et al.  Effect of secondary fluid motion on laminar flow heat transfer in helically coiled tubes , 1971 .

[13]  P. Naphon,et al.  Effect of curvature ratios on the heat transfer and flow developments in the horizontal spirally coiled tubes , 2007 .

[14]  S. Suresh,et al.  Experimental investigations and theoretical determination of thermal conductivity and viscosity of Al2O3/water nanofluid , 2010 .

[15]  Junming Li,et al.  Experimental viscosity measurements for copper oxide nanoparticle suspensions , 2002 .

[16]  E. Grulke,et al.  Anomalous thermal conductivity enhancement in nanotube suspensions , 2001 .