A comparison of initial spray characteristics produced by agricultural nozzles

Pesticides are commonly applied by using hydraulic nozzles to generate droplets. The properties of these spray droplets can influence the effectiveness and risks associated with the use of pesticides. Initial spray characteristics (initial droplet size and velocity, fan angle and spray liquid density) were therefore measured for a range of hydraulic nozzles and spray mixtures. Particle Image Velocimetry (PIV) was used to measure the spray sheet velocity.There was a significant difference between a standard hydraulic nozzle, Turbo TeeJet® and air induction nozzle for all measured spray characteristics. The standard hydraulic nozzle generated the smallest droplet sizes, the highest velocity and the highest spray liquid density. The air induction nozzle generated the largest droplet size, the slowest velocity and the lowest spray liquid density. The type of air induction nozzle and spray formulation was also found to influence spray characteristics.This work has demonstrated that initial spray characteristics such as droplet size and velocity, liquid density, fan angle and included air can vary depending on nozzle design, operating parameters and spray formulations. Initial droplet velocity was found to be significantly correlated to droplet size (Dv0.5) and spray pressure.

[1]  P. Spanoghe,et al.  Influence of agricultural adjuvants on droplet spectra. , 2007, Pest management science.

[2]  Milton E. Teske,et al.  CONVERSION OF DROPLET SIZE DISTRIBUTIONS FROM PMS OPTICAL ARRAY PROBE TO MALVERN LASER DIFFRACTION , 2002 .

[3]  B. E. Lee,et al.  A model for the capture of aerially sprayed pesticide by barley , 2000 .

[4]  David Nuyttens,et al.  Effects on pesticide spray drift of the physicochemical properties of the spray liquid , 2009, Precision Agriculture.

[5]  Steven G. Perry,et al.  Off‐Target Deposition of Pesticides from Agricultural Aerial Spray Applications , 1996 .

[6]  M. M. Sidahmed,et al.  DROP-SIZE/VELOCITY CORRELATIONS AT FORMATION OF SPRAYS FROM FAN NOZZLES , 1999 .

[7]  David Nuyttens,et al.  Effect of nozzle type, size and pressure on spray droplet characteristics , 2007 .

[8]  David R Johnson,et al.  Development of the Spray Drift Task force database for aerial applications , 2002, Environmental toxicology and chemistry.

[9]  Markus Raffel,et al.  Particle Image Velocimetry: A Practical Guide , 2002 .

[10]  David Nuyttens,et al.  Predicting drift from field spraying by means of a 3D computational fluid dynamics model , 2007 .

[11]  Jean-Marie Buchlin,et al.  Detailed single spray experimental measurements and one-dimensional modelling , 1994 .

[12]  Sabine Beulke,et al.  How does crop type influence risk from pesticides to the aquatic environment? , 2007, Environmental toxicology and chemistry.

[13]  Jim Hanan,et al.  Spray deposition on plant surfaces: a modelling approach. , 2008, Functional plant biology : FPB.

[14]  N. Woods,et al.  A simple guide to predicting aircraft spray drift , 1998 .

[15]  A. R. Frost,et al.  The significance of drop velocity to the determination of drop size distributions of agricultural sprays , 1981 .

[16]  A simplified heavy particle random-walk model for the prediction of drift from agricultural sprays , 1991 .

[17]  J. Combellack,et al.  A comparison of the drift potential of a novel twin fluid nozzle with conventional low volume flat fan nozzles when using a range of adjuvants , 1996 .

[18]  David Nuyttens,et al.  The influence of operator-controlled variables on spray drift from field crop sprayers , 2007 .

[19]  M. C. Butler Ellis,et al.  PM—Power and Machinery: Design Factors affecting Spray Characteristics and Drift Performance of Air Induction Nozzles , 2002 .

[20]  H. Ganzelmeier,et al.  The International (BCPC) spray classification system including a drift potential factor , 1998 .

[21]  M. M. Sidahmed.  A Model for Predicting the Droplet Size from Liquid Sheets in Airstreams , 1996 .

[22]  Yang Yu,et al.  SPRAY CHARACTERISTICS AND DRIFT REDUCTION POTENTIAL WITH AIR INDUCTION AND CONVENTIONAL FLAT-FAN NOZZLES , 2007 .

[23]  D. Nuyttens,et al.  Droplet Size and Velocity Characteristics of Agricultural Sprays , 2009 .

[24]  David H. Bache,et al.  Microclimate and spray dispersion , 1992 .

[25]  M. M. Sidahmed.  A Theory for Predicting the Size and Velocity of Droplets from Pressure Nozzles , 1996 .

[26]  P. J. Rice,et al.  Advances in pesticide environmental fate and exposure assessments. , 2007, Journal of agricultural and food chemistry.

[27]  M. B. Ellis,et al.  Effects of formulation on spray nozzle performance for applications from ground-based boom sprayers , 2000 .