Recent Progress in Manufacturing Techniques of Printed and Flexible Sensors: A Review

This review provides an outlook on some of the significant research work done on printed and flexible sensors. Printed sensors fabricated on flexible platforms such as paper, plastic and textiles have been implemented for wearable applications in the biomedical, defense, food, and environmental industries. This review discusses the materials, characterization methods, and fabrication methods implemented for the development of the printed and flexible sensors. The applications, challenges faced and future opportunities for the printed and flexible sensors are also presented in this review.

[1]  Maryam Shojaei Baghini,et al.  An Auto-Calibrated Resistive Measurement System With Low Noise Instrumentation ASIC , 2020, IEEE Journal of Solid-State Circuits.

[2]  Gerhard Neumann,et al.  Directly Printable Flexible Strain Sensors for Bending and Contact Feedback of Soft Actuators , 2018, Front. Robot. AI.

[3]  Lokendra Pal,et al.  Cellulose and nanocellulose-based flexible-hybrid printed electronics and conductive composites - A review. , 2018, Carbohydrate polymers.

[4]  Shogo Nakata,et al.  Wearable, Flexible, and Multifunctional Healthcare Device with an ISFET Chemical Sensor for Simultaneous Sweat pH and Skin Temperature Monitoring. , 2017, ACS sensors.

[5]  B. B. Narakathu,et al.  Screen printing of flexible piezoelectric based device on polyethylene terephthalate (PET) and paper for touch and force sensing applications , 2017 .

[6]  Julien Bras,et al.  Use of nanocellulose in printed electronics: a review. , 2016, Nanoscale.

[7]  B. B. Narakathu,et al.  Flexible Capacitive Pressure Sensor Based on PDMS Substrate and Ga–In Liquid Metal , 2019, IEEE Sensors Journal.

[8]  Caofeng Pan,et al.  Fabrication of Large‐Area Bimodal Sensors by All‐Inkjet‐Printing , 2019, Advanced Materials Technologies.

[9]  A. K. Bose,et al.  Highly Sensitive Screen Printed Strain Gauge for Micro-Strain Detection , 2019, 2019 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS).

[10]  Massood Z. Atashbar,et al.  Fully printed organic thin film transistors (OTFT) based flexible humidity sensors , 2013, 2013 IEEE SENSORS.

[11]  B. B. Narakathu,et al.  Incorporating a Novel Hexaazatriphenylene Derivative to a Flexible Screen-Printed Electrochemical Sensor for Copper Ion Detection in Water Samples , 2020, IEEE Sensors Journal.

[12]  Rosa Villa,et al.  Inkjet-printed electrochemical sensors , 2017 .

[13]  Jae-Yoon Sim,et al.  Wireless smart contact lens for diabetic diagnosis and therapy , 2020, Science Advances.

[14]  A. Schenning,et al.  Air-Curable, High-Resolution Patternable Oxetane-Based Liquid Crystalline Photonic Films via Flexographic Printing , 2019, ACS applied materials & interfaces.

[15]  Yong Zhu,et al.  Gravure Printing of Water-based Silver Nanowire ink on Plastic Substrate for Flexible Electronics , 2018, Scientific Reports.

[16]  Bradley J. Bazuin,et al.  A novel flexographic printed strain gauge on paper platform , 2015, 2015 IEEE SENSORS.

[17]  B. B. Narakathu,et al.  A screen printed and flexible piezoelectric-based AC magnetic field sensor , 2017 .

[18]  Arved C. Hübler,et al.  Fully mass printed loudspeakers on paper , 2012 .

[19]  P. D. Fleming,et al.  Inkjet Printing and Sintering of Nano Copper Ink , 2012, NIP & Digital Fabrication Conference.

[20]  B. B. Narakathu,et al.  A highly sensitive printed humidity sensor based on a functionalized MWCNT/HEC composite for flexible electronics application , 2019, Nanoscale advances.

[21]  D. Deganello,et al.  Direct patterning of gold nanoparticles using flexographic printing for biosensing applications , 2015, Nanoscale Research Letters.

[22]  B. B. Narakathu,et al.  Screen Printing of Multilayered Hybrid Printed Circuit Boards on Different Substrates , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[23]  John A Rogers,et al.  Stretchable ferroelectric nanoribbons with wavy configurations on elastomeric substrates. , 2011, ACS nano.

[24]  Kye-Si Kwon,et al.  A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors , 2015, Scientific Reports.

[25]  B. B. Narakathu,et al.  Novel fully screen printed flexible electrochemical sensor for the investigation of electron transfer between thiol functionalized viologen and gold clusters , 2013 .

[26]  Alexandra Pekarovicova,et al.  Printed electronics at Western Michigan University , 2007 .

[27]  Wen-Yang Chang,et al.  A Large Area Flexible Array Sensors Using Screen Printing Technology , 2009, Journal of Display Technology.

[28]  Ying-Chih Liao,et al.  Adhesive Stretchable Printed Conductive Thin Film Patterns on PDMS Surface with an Atmospheric Plasma Treatment. , 2016, ACS applied materials & interfaces.

[29]  A. K. Bose,et al.  A Polyimide Based Force Sensor Fabricated Using Additive Screen-Printing Process for Flexible Electronics , 2020, IEEE Access.

[30]  Nadine Eberhardt,et al.  Sensor Technology Handbook , 2016 .

[31]  B. B. Narakathu,et al.  A novel fully printed and flexible capacitive pressure sensor , 2012, 2012 IEEE Sensors.

[32]  J. Yook,et al.  All inkjet-printed flexible wireless power transfer module: PI/Ag hybrid spiral coil built into 3D NiZn-ferrite trench structure with a resonance capacitor , 2019, Nano Energy.

[33]  M. Mäntysalo,et al.  Graphene / PEDOT : PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate , 2016 .

[34]  Christoph Gerhard,et al.  Low-temperature atmospheric pressure argon plasma treatment and hybrid laser-plasma ablation of barite crown and heavy flint glass. , 2012, Applied optics.

[35]  D. Baran,et al.  Digital Inkjet Printing of High‐Efficiency Large‐Area Nonfullerene Organic Solar Cells , 2019, Advanced Materials Technologies.

[36]  G. de With,et al.  Electrical conductivity of compacts of graphene, multi-wall carbon nanotubes, carbon black, and graphite powder , 2012 .

[37]  B. B. Narakathu,et al.  Development of a printed impedance based electrochemical sensor on paper substrate , 2016, 2016 IEEE SENSORS.

[38]  Hongwei Jiang,et al.  Screen printing insulator coatings for electrofluidic display devices , 2015 .

[39]  R. Dahiya,et al.  High-performance printed electronics based on inorganic semiconducting nano to chip scale structures , 2020, Nano Convergence.

[40]  G. Jabbour,et al.  Recent developments and directions in printed nanomaterials. , 2015, Nanoscale.

[41]  Han‐Ki Kim,et al.  Cost-effective stretchable Ag nanoparticles electrodes fabrication by screen printing for wearable strain sensors , 2020 .

[42]  Xiaodong Zhuang,et al.  Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing. , 2017, ACS nano.

[43]  Zhiqiang Fang,et al.  A gravure printed antenna on shape-stable transparent nanopaper. , 2014, Nanoscale.

[44]  Jonathan P. Metters,et al.  New directions in screen printed electroanalytical sensors: an overview of recent developments. , 2011, The Analyst.

[45]  Joseph Wang,et al.  Wearable Electrochemical Sensors and Biosensors: A Review , 2013 .

[46]  B. B. Narakathu,et al.  Printed strain sensor based on silver nanowire/silver flake composite on flexible and stretchable TPU substrate , 2018 .

[47]  A. Lymberis,et al.  Smart wearables for remote health monitoring, from prevention to rehabilitation: current R&D, future challenges , 2003, 4th International IEEE EMBS Special Topic Conference on Information Technology Applications in Biomedicine, 2003..

[48]  Xiaoxi Zhu,et al.  Functional inks and printing of two-dimensional materials. , 2018, Chemical Society reviews.

[49]  B. Meng,et al.  A fully inkjet-printed transparent humidity sensor based on a Ti3C2/Ag hybrid for touchless sensing of finger motion. , 2019, Nanoscale.

[50]  B. B. Narakathu,et al.  Nickel Based RTD Fabricated via Additive Screen Printing Process for Flexible Electronics , 2019, IEEE Access.

[51]  Wei Shen,et al.  Liquid marble for gas sensing. , 2010, Chemical communications.

[52]  S. A. Lawal,et al.  Surface Roughness Characteristics in Finish Electro-Discharge Machining Process , 2014 .

[53]  B. B. Narakathu,et al.  Development of a Microfluidic Sensing Platform by Integrating PCB Technology and Inkjet Printing Process , 2015, IEEE Sensors Journal.

[54]  B. B. Narakathu,et al.  A carbon nanotube based NTC thermistor using additive print manufacturing processes , 2018, Sensors and Actuators A: Physical.

[55]  Yonggang Huang,et al.  Stretchable and Foldable Silicon Integrated Circuits , 2008, Science.

[56]  A. Arias,et al.  Materials and applications for large area electronics: solution-based approaches. , 2010, Chemical reviews.

[57]  S. Cinti,et al.  Graphene-based screen-printed electrochemical (bio)sensors and their applications: Efforts and criticisms. , 2017, Biosensors & bioelectronics.

[58]  G. Kiriakidis,et al.  Large‐Area All‐Printed Temperature Sensing Surfaces Using Novel Composite Thermistor Materials , 2018, Advanced Electronic Materials.

[59]  B. B. Narakathu,et al.  A Gravure Printed Flexible Electrochemical Sensor for the Detection of Heavy Metal Compounds , 2018, Proceedings.

[60]  Babak Ziaie,et al.  A manufacturable smart dressing with oxygen delivery and sensing capability for chronic wound management , 2018, Defense + Security.

[61]  P. D. Fleming,et al.  Surface Free Energy Estimation: A New Methodology for Solid Surfaces , 2020, Advanced Materials Interfaces.

[62]  S. Magdassi,et al.  Conductive nanomaterials for printed electronics. , 2014, Small.

[63]  Jan G. Korvink,et al.  Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials , 2010 .

[64]  Yong Zhu,et al.  Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications , 2019, Advanced Materials Technologies.

[65]  Yu Cao,et al.  Screen printing as a scalable and low-cost approach for rigid and flexible thin-film transistors using separated carbon nanotubes. , 2014, ACS nano.

[66]  Ji Li,et al.  Integration of additive manufacturing and inkjet printed electronics: a potential route to parts with embedded multifunctionality , 2016 .

[67]  Ronn Andriessen,et al.  High efficiency, fully inkjet printed organic solar cells with freedom of design , 2015 .

[68]  J. Rothstein,et al.  Ink transfer of non-Newtonian fluids from an idealized gravure cell: The effect of shear and extensional deformation , 2017 .

[69]  Zhiqiang Fang,et al.  A new photoelectric ink based on nanocellulose/CdS quantum dots for screen-printing. , 2016, Carbohydrate polymers.

[70]  B. B. Narakathu,et al.  Fully Printed Flexible Humidity Sensor , 2011 .

[71]  Hak-Sung Kim,et al.  Inkjet printed electronics using copper nanoparticle ink , 2010 .

[72]  S. Magdassi,et al.  Effect of carboxylic acids on conductivity of metallic films formed by inks based on copper@silver core-shell particles , 2017 .

[73]  Jing Liu,et al.  Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications , 2016, Micromachines.

[74]  Katsuaki Suganuma,et al.  Introduction to Printed Electronics , 2014, Springer Briefs in Electrical and Computer Engineering.

[75]  Ali Eshkeiti,et al.  Novel Stretchable Printed Wearable Sensor for Monitoring Body Movement, Temperature and Electrocardiogram, along with the Readout Circuit , 2015 .

[76]  B. B. Narakathu,et al.  Synthesis of a novel hexaazatriphenylene derivative for the selective detection of copper ions in aqueous solution , 2019, RSC advances.

[77]  P. Lund,et al.  Rheological characterization of liquid electrolytes for drop-on-demand inkjet printing , 2016 .

[78]  Nemai Chandra Karmakar,et al.  Microwave performance of flexo-printed chipless RFID tags , 2019, Flexible and Printed Electronics.

[79]  B. Derby.  Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .

[80]  George M Whitesides,et al.  Inkjet Printing of Conductive Inks with High Lateral Resolution on Omniphobic “RF Paper” for Paper‐Based Electronics and MEMS , 2014, Advanced materials.

[81]  P. H. Lau,et al.  Fully printed, high performance carbon nanotube thin-film transistors on flexible substrates. , 2013, Nano letters.

[82]  I. Hutchings,et al.  Inkjet printing - the physics of manipulating liquid jets and drops , 2008 .

[83]  K. Daoulas,et al.  Ink Formulation for Printed Organic Electronics: Investigating Effects of Aggregation on Structure and Rheology of Functional Inks Based on Conjugated Polymers in Mixed Solvents , 2020, Advanced Materials Technologies.

[84]  Hongliang Ren,et al.  A Review of Printable Flexible and Stretchable Tactile Sensors , 2019, Research.

[85]  D. Maddipatla.  Development of Fully Printed and Flexible Strain, Pressure and Electrochemical Sensors , 2016 .

[86]  S. Kishimoto,et al.  High-Mobility, Flexible Carbon Nanotube Thin-Film Transistors Fabricated by Transfer and High-Speed Flexographic Printing Techniques , 2013 .

[87]  J. Brennan,et al.  Deposited Nanoparticles Can Promote Air Clogging of Piezoelectric Inkjet Printhead Nozzles. , 2019, Langmuir : the ACS journal of surfaces and colloids.

[88]  B. B. Narakathu,et al.  Integrated sensing and delivery of oxygen for next-generation smart wound dressings , 2020, Microsystems & nanoengineering.

[89]  B. B. Narakathu,et al.  A Screen Printed Phenanthroline-Based Flexible Electrochemical Sensor for Selective Detection of Toxic Heavy Metal Ions , 2016, IEEE Sensors Journal.

[90]  A. Javey,et al.  Roll-to-Roll Gravure Printed Electrochemical Sensors for Wearable and Medical Devices. , 2018, ACS nano.

[91]  Atif Shamim,et al.  A Reconfigurable Inkjet-Printed Antenna on Paper Substrate for Wireless Applications , 2018, IEEE Antennas and Wireless Propagation Letters.

[92]  Sam Emaminejad,et al.  Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis , 2016, Nature.

[93]  P. D. Fleming,et al.  Impact of Substrate and Process on the Electrical Performance of Screen-Printed Nickel Electrodes: Fundamental Mechanism of Ink Film Roughness , 2018, ACS Applied Energy Materials.

[94]  Woo Jin Hyun,et al.  Inkjet-printed, self-aligned organic Schottky diodes on imprinted plastic substrates , 2020, Flexible and Printed Electronics.

[95]  Gyoujin Cho,et al.  Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging , 2014, Scientific Reports.

[96]  David T. Gethin,et al.  Large-area printed supercapacitor technology for low-cost domestic green energy storage , 2017 .

[97]  Huanyu Cheng,et al.  Dissolvable tattoo sensors: from science fiction to a viable technology , 2016 .

[98]  Wei Wu,et al.  All-printed, low-cost, tunable sensing range strain sensors based on Ag nanodendrite conductive inks for wearable electronics , 2019, Journal of Materials Chemistry C.

[99]  B. B. Narakathu,et al.  Detection of heavy metal compounds using a novel inkjet printed surface enhanced Raman spectroscopy (SERS) substrate , 2012 .

[100]  Suresh Kumar Garlapati,et al.  Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices , 2018, Advanced materials.

[101]  B. B. Narakathu,et al.  Development of a novel carbon nanotube based printed and flexible pressure sensor , 2017, 2017 IEEE Sensors Applications Symposium (SAS).

[102]  Rita Faddoul,et al.  Formulation and screen printing of water based conductive flake silver pastes onto green ceramic tapes for electronic applications , 2012 .

[103]  Nagaraj P. Shetti,et al.  Skin-Patchable Electrodes for Biosensor Applications: A Review. , 2020, ACS biomaterials science & engineering.

[104]  A. K. Bose,et al.  Screen-Printed Strain Gauge for Micro-Strain Detection Applications , 2020, IEEE Sensors Journal.

[105]  Arno Thielens,et al.  A New Frontier of Printed Electronics: Flexible Hybrid Electronics , 2019, Advanced materials.

[106]  Yong Zhu,et al.  Nanomaterial‐Enabled Wearable Sensors for Healthcare , 2018, Advanced healthcare materials.

[107]  D. Curtis,et al.  Control of morphological and electrical properties of flexographic printed electronics through tailored ink rheology , 2019, Organic Electronics.

[108]  B. B. Narakathu,et al.  Rapid prototyping of a novel and flexible paper based oxygen sensing patch via additive inkjet printing process , 2019, RSC advances.

[109]  Osman Dogan Yirmibesoglu,et al.  Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics , 2018 .

[110]  Jung Woo Lee,et al.  Rugged and breathable forms of stretchable electronics with adherent composite substrates for transcutaneous monitoring , 2014, Nature Communications.

[111]  Z. Cui,et al.  Printed Electronics: Materials, Technologies and Applications , 2016 .

[112]  A. K. Bose,et al.  Printed Carbon Nanotubes-Based Flexible Resistive Humidity Sensor , 2020, IEEE Sensors Journal.

[113]  K. Hokkirigawa,et al.  Dry sliding friction and Wear behavior of thermoplastic polyurethane against abrasive paper , 2020 .

[114]  Henning Sirringhaus,et al.  High yield, single droplet electrode arrays for nanoscale printed electronics. , 2010, ACS nano.

[115]  Clifford K. Ho,et al.  Overview of Sensors and Needs for Environmental Monitoring , 2005, Sensors (Basel, Switzerland).

[116]  Junaidi,et al.  High-Performance Silver Nanowire Film on Flexible Substrate Prepared by Meyer-rod Coating , 2017 .

[117]  Jing Chen,et al.  Printable, Highly Sensitive Flexible Temperature Sensors for Human Body Temperature Monitoring: A Review , 2020, Nanoscale Research Letters.

[118]  Rui Zhang,et al.  Printed electronics based on inorganic conductive nanomaterials and their applications in intelligent food packaging , 2019, RSC advances.

[119]  Helmut Kipphan,et al.  Handbook of Print Media: Technologies and Production Methods , 2006 .

[120]  K. Salama,et al.  A paper-based inkjet-printed PEDOT:PSS/ZnO sol-gel hydrazine sensor , 2020 .

[121]  T. Nishida,et al.  Airbrushing and surface modification for fabricating flexible electronics on polydimethylsiloxane , 2018, Journal of Micromechanics and Microengineering.

[122]  Wei Wu.  Inorganic nanomaterials for printed electronics: a review. , 2017, Nanoscale.

[123]  Fridtjov Irgens,et al.  Rheology and Non-Newtonian Fluids , 2013 .

[124]  Danick Briand,et al.  Fully inkjet printed SnO2 gas sensor on plastic substrate , 2016 .

[125]  Seok Hyun Yun,et al.  Contact Lens Sensors in Ocular Diagnostics , 2015, Advanced healthcare materials.

[126]  B. B. Narakathu,et al.  Development of a novel wrinkle-structure based SERS substrate for drug detection applications , 2019, Sensing and Bio-Sensing Research.

[127]  J. Tulliani,et al.  Carbon-Based Materials for Humidity Sensing: A Short Review , 2019, Micromachines.

[128]  Min Zhang,et al.  Flexible, Stretchable Sensors for Wearable Health Monitoring: Sensing Mechanisms, Materials, Fabrication Strategies and Features , 2018, Sensors.

[129]  Christian Kohler,et al.  Fabrication and Characterization of Fully Inkjet Printed Capacitors Based on Ceramic/Polymer Composite Dielectrics on Flexible Substrates , 2019, Scientific Reports.

[130]  D. Deganello,et al.  Facile fabrication of electrochemical ZnO nanowire glucose biosensor using roll to roll printing technique , 2017 .

[131]  J. D. Berry,et al.  Measurement of surface and interfacial tension using pendant drop tensiometry. , 2015, Journal of colloid and interface science.

[132]  Zhong Lin Wang,et al.  Screen-Printed Washable Electronic Textiles as Self-Powered Touch/Gesture Tribo-Sensors for Intelligent Human-Machine Interaction. , 2018, ACS nano.