Weldability of powder bed fusion fabricated stainless steel 316L sheets to cold rolled sheet metal

Lappeenranta University of Technology LUT School of Energy Systems LUT Mechanical Engineering

[1]  Deyong You,et al.  Monitoring of high-power laser welding using high-speed photographing and image processing , 2014 .

[2]  Chandrika Kamath,et al.  Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W , 2014 .

[3]  Thomas Tröster,et al.  On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting , 2014 .

[4]  Lucas Dembinski,et al.  The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder , 2013 .

[5]  Li Wang,et al.  Balling behavior of stainless steel and nickel powder during selective laser melting process , 2012 .

[6]  Subodh Kumar,et al.  Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints , 2011 .

[7]  R. Fabbro,et al.  Melt pool and keyhole behaviour analysis for deep penetration laser welding , 2010 .

[8]  Li Wang,et al.  Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting , 2010 .

[9]  Yifu Shen,et al.  Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods , 2009 .

[10]  Abdolreza Simchi,et al.  Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features , 2006 .

[11]  A. Kumar,et al.  Tailoring complex weld geometry through reliable heat-transfer and fluid-flow calculations and a genetic algorithm , 2005 .

[12]  J. Lippold,et al.  Nature and evolution of the fusion boundary in ferritic-austenitic dissimilar weld metals : Part 1 - Nucleation and growth , 1999 .

[13]  J. M. Vitek,et al.  Effect of rapid solidification on stainless steel weld metal microstructures and its implications on the Schaeffler diagram , 1987 .

[14]  V. Kujanpää.  Thick-section Laser and Hybrid Welding of Austenitic Stainless Steels , 2014 .

[15]  Antti Salminen,et al.  Characterization of Process Efficiency Improvement in Laser Additive Manufacturing , 2014 .

[16]  N. Arivazhagan,et al.  Micro-segregation Studies on the Continuous Nd: YAG Laser Beam Welded AISI 316L , 2014 .

[17]  Welding Variables and Microfissuring in Austenitic Stainless Steel Weld Metal , 2013 .

[18]  Rudolf Weber,et al.  Effects of Welding Parameters Onto Keyhole Geometry for Partial Penetration Laser Welding , 2013 .

[19]  H. W. Kerr,et al.  The Ferrite to Austenite Transformation in Stainless Steels , 2013 .

[20]  Antti Salminen,et al.  Temperature profile and imaging analysis of laser additive manufacturing of stainless steel , 2013 .

[21]  Corrosion Resistance of Stainless Steel Weldments , 2013 .

[22]  Seiji Katayama,et al.  Fiber laser welding of AISI 304 stainless steel plates , 2009 .

[23]  J. Vitek.  The Sigma Phase Transformation in Austenitic Stainless Steel , 1986 .

[24]  R. Castro,et al.  Welding metallurgy of stainless and heat-resisting steels , 1975 .