Applications of the matrix-assisted pulsed laser evaporation method for the deposition of organic, biological and nanoparticle thin films: a review

The matrix-assisted pulsed laser evaporation (MAPLE) technique offers an efficient mechanism to transfer soft materials from the condensed to the vapor phase, preserving the versatility, ease of use and high deposition rates of the pulsed laser deposition (PLD) technique. The materials of interest (polymers, biological cells, proteins, …) are diluted in a volatile solvent. Then the solution is frozen and irradiated with a pulsed laser beam. Here, important results of MAPLE deposition of polymer, biomaterials and nanoparticle films are summarized. Finally, the MAPLE mechanism is discussed. A review of experimental and theoretical works points out that the simple model of individual molecule evaporation must be abandoned. Solute concentration, solubility, evaporation temperature of solvents, laser pulse power density and laser penetration depth emerge as important parameters to explain the morphology of the MAPLE-deposited films.

[1]  R. A. McGill,et al.  The effect of the matrix on film properties in matrix-assisted pulsed laser evaporation , 2002 .

[2]  M. Karas,et al.  Matrix-assisted ultraviolet laser desorption of non-volatile compounds , 1987 .

[3]  I. Păun,et al.  Thin films of polymer blends for controlled drug delivery deposited by matrix-assisted pulsed laser evaporation , 2010 .

[4]  E. Nappi,et al.  Ion-beam sputtering deposition of CsI thin films , 2005 .

[5]  Dapeng Yu,et al.  Ultraviolet-emitting ZnO nanowires synthesized by a physical vapor deposition approach , 2001 .

[6]  I. Stamatin,et al.  Deposition of biopolymer thin films by matrix assisted pulsed laser evaporation , 2004 .

[7]  I. Mihailescu,et al.  Advanced Biomimetic Implants Based on Nanostructured Coatings Synthesized by Pulsed Laser Technologies , 2010 .

[8]  J. Werckmann,et al.  Study of the gradual interface between hydroxyapatite thin films PLD grown onto Ti-controlled sublayers , 2007 .

[9]  A. Luches,et al.  Reactive laser deposition of high quality YBaCuO and ErBaCuO films , 1996 .

[10]  J. Park,et al.  Hybrid LCVD of micro-metallic lines for TFT-LCD circuit repair , 2006 .

[11]  T. Chong,et al.  Growth of β-Ga2O3 nanoparticles by pulsed laser ablation technique , 2004 .

[12]  A. Luches,et al.  Laser deposition of semiconductor thin films based on iron oxides , 2007 .

[13]  A. Boccaccini,et al.  Matrix-assisted pulsed laser evaporation of poly(D,L-lactide) for biomedical applications: effect of near infrared radiation. , 2008, Journal of biomedical optics.

[14]  R. A. McGill,et al.  Performance optimization of surface acoustic wave chemical sensors , 1998 .

[15]  Kevin M. Smith,et al.  Synthesis and Functionalization of Germanium Triphenylcorrolate: The First Example of a Partially Brominated Corrole , 2007 .

[16]  Peidong Yang,et al.  One-step patterning of aligned nanowire arrays by programmed dip coating. , 2007, Angewandte Chemie.

[17]  R. A. McGill,et al.  Deposition Of Nanotubes and Nanotube Composites Using Matrix-Assisted Pulsed Laser Evaporation , 2000 .

[18]  G. Lanza,et al.  Ultra-short pulse laser ablation of Al70Cu20Fe10 alloy: Nanoparticles generation and thin films deposition , 2009 .

[19]  A. Voevodin,et al.  Development of matrix-assisted pulsed laser evaporation (MAPLE) for deposition of disperse films of carbon nanoparticles and gold/nanoparticle composite films , 2008 .

[20]  Paolo M. Ossi,et al.  Laser-Surface Interactions for New Materials Production , 2010 .

[21]  A. Luches,et al.  Titanium carbide film deposition on silicon wafers by pulsed KrF laser ablation of titanium in low-pressure CH4 and C2H2 atmospheres , 2004 .

[22]  M. Anni,et al.  Pulsed laser deposition of organic and biological materials , 2009 .

[23]  Recent progress in CAD/CAM laser direct-writing of biomaterials , 2008 .

[24]  Christoph Dellago,et al.  Structural and Morphological Transitions in Gold Nanorods: A Computer Simulation Study , 2003 .

[25]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[26]  Donal D. C. Bradley,et al.  High brightness and efficiency blue light-emitting polymer diodes , 1998 .

[27]  A. Luches,et al.  Characterization of thin indium tin oxide films deposited by pulsed XeCl laser ablation , 2001 .

[28]  R. Cingolani,et al.  Microscopic investigation of the poly(9,9-dioctylfluorene) photoluminescence dependence on the deposition conditions by confocal laser microscopy , 2006 .

[29]  C. Hansen.  Hansen Solubility Parameters: A User's Handbook , 1999 .

[30]  R. A. McGill,et al.  Matrix-assisted laser deposition of a sorbent oligomer using an infrared laser , 2004 .

[31]  A. P. Caricato,et al.  Films of brookite TiO2 nanorods/nanoparticles deposited by matrix-assisted pulsed laser evaporation as NO2 gas-sensing layers , 2011 .

[32]  Anna Paola Caricato,et al.  Nanoparticle Thin Films for Gas Sensors Prepared by Matrix Assisted Pulsed Laser Evaporation , 2009, Sensors.

[33]  J. M. Fitz-Gerald,et al.  Pulsed laser deposition vs. matrix assisted pulsed laser evaporation for growth of biodegradable polymer thin films , 2005 .

[34]  T. Karabacak,et al.  Low temperature melting of copper nanorod arrays , 2006 .

[35]  S. Acquaviva,et al.  Transfer of stoichiometry during pulsed laser ablation of multicomponent magnetic targets , 2005 .

[36]  L. Zhigilei,et al.  Molecular dynamics simulation study of the ejection and transport of polymer molecules in matrix-assisted pulsed laser evaporation , 2007 .

[37]  Markus Kuhr,et al.  Coatings on plastics with the PICVD technology , 2003 .

[38]  R. A. McGill,et al.  Novel Laser-Based Deposition of Active Protein Thin Films , 2001 .

[39]  Donal D. C. Bradley,et al.  Exciton migration in β -phase poly(9,9-dioctylfluorene) , 2003 .

[40]  H. Qi,et al.  Al2O3/SiO2 films prepared by electron-beam evaporation as UV antireflection coatings on 4H-SiC , 2008 .

[41]  Tatiana Itina,et al.  Microscopic Mechanisms of Matrix Assisted Laser Desorption of Analyte Molecules: Insights from Molecular Dynamics Simulation , 2002 .

[42]  F. J. Adrian,et al.  Metal deposition from a supported metal film using an excimer laser , 1986 .

[43]  Reinhard Schwödiauer,et al.  Charge stability of pulsed-laser deposited polytetrafluoroethylene film electrets , 1998 .

[44]  T. Uchiyama,et al.  Superconductivity in silver boron intermetallic compound , 2004 .

[45]  I. Stamatin,et al.  Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems , 2006 .

[46]  M. Schnaiter,et al.  Coating of soot and (NH4)2SO4 particles by ozonolysis products of α-pinene , 2003 .

[47]  Tatiana Itina,et al.  Matrix-assisted pulsed laser evaporation of polymeric materials: a molecular dynamics study , 2001 .

[48]  D. Chrisey,et al.  Laser direct writing of phosphor screens for high-definition displays , 2000 .

[49]  D. M. Bubb,et al.  Assessing the effect of the matrix in resonant infrared MAPLE , 2007 .

[50]  D. Chrisey,et al.  Functionalized polysiloxane thin films deposited by matrix-assisted pulsed laser evaporation for advanced chemical sensor applications , 2006 .

[51]  K. Stebe,et al.  Spontaneous pattern formation by dip coating of colloidal suspensions on homogeneous surfaces. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[52]  M. Yudasaka,et al.  Polyperinaphthalene film formation by pulsed laser deposition with a target of perylenetetracarboxylic dianhydride , 1994 .

[53]  I. Stamatin,et al.  Matrix assisted pulsed laser evaporation of poly( D, L-lactide) thin films for controlled-release drug systems , 2007 .

[54]  Vincenzo Grillo,et al.  Nonhydrolytic synthesis of high-quality anisotropically shaped brookite TiO2 nanocrystals. , 2008, Journal of the American Chemical Society.

[55]  Feng Gu,et al.  Synthesis and luminescence properties of SnO2 nanoparticles , 2003 .

[56]  G. Barucca,et al.  Morphological and structural characterizations of CrSi2 nanometric films deposited by laser ablation , 2007 .

[57]  R. A. McGill,et al.  Laser deposition of polymer and biomaterial films. , 2003, Chemical reviews.

[58]  R. A. McGill,et al.  CHOOSING POLYMER COATINGS FOR CHEMICAL SENSORS , 1994 .

[59]  U. K. Laemmli,et al.  Cleavage of Structural Proteins during the Assembly of the Head of Bacteriophage T4 , 1970, Nature.

[60]  J. Schou,et al.  Surface morphology of polyethylene glycol films produced by matrix-assisted pulsed laser evaporation (MAPLE): Dependence on substrate temperature , 2006 .

[61]  A. Köhler,et al.  Morphology-dependent energy transfer within polyfluorene thin films , 2004 .

[62]  S. Nishio,et al.  Control of structures of deposited polymer films by ablation laser wavelength: Polyacrylonitrile at 308, 248, and 193 nm , 1996 .

[63]  Jenq-Neng Hwang,et al.  Mechanisms of Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation , 2011 .

[64]  J. Schou,et al.  Particle emission from polymer-doped water ice matrices induced by non-linear absorption of laser light at 1064 nm , 2006 .

[65]  S. Shah,et al.  Laser Ablation and the Production of Polymer Films , 1993, Science.

[66]  Mauro Epifani,et al.  MAPLE deposition and characterization of SnO2 colloidal nanoparticle thin films , 2009 .

[67]  D. M. Bubb,et al.  The influence of solvent parameters upon the surface roughness of matrix assisted laser deposited thin polymer films , 2007 .

[68]  M. El-Sayed,et al.  Laser-Induced Shape Changes of Colloidal Gold Nanorods Using Femtosecond and Nanosecond Laser Pulses , 2000 .

[69]  M. Cross,et al.  Radiative melting of crystalline ruthenium oxide nanorods , 2008, Nanotechnology.

[70]  D. Krizman,et al.  Picoliter‐Scale Protein Microarrays by Laser Direct Write , 2002, Biotechnology progress.

[71]  R. A. McGill,et al.  Laser processing of polymer thin films for chemical sensor applications , 2003 .

[72]  G. Horowitz,et al.  Growth of polyalkylthiophene films by matrix assisted pulsed laser evaporation , 2004 .

[73]  B R Ringeisen,et al.  Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer. , 2002, Biomaterials.

[74]  M. Ferrari,et al.  Chalcogenide glass thin film waveguides deposited by excimer laser ablation , 2003 .

[75]  J. Schou,et al.  High laser-fluence deposition of organic materials in water ice matrices by “MAPLE” , 2005 .

[76]  L. Zhigilei,et al.  Substrate-Assisted Laser-Initiated Ejection of Proteins Embedded in Water Films , 2003 .

[77]  G. Haidemenopoulos,et al.  Deposition of refractory coatings by LCVD , 1995 .

[78]  I. Stamatin,et al.  Polycaprolactone biopolymer thin films obtained by matrix assisted pulsed laser evaporation , 2007 .

[79]  James J. O'Brien,et al.  Progress with Light‐Emitting Polymers , 2000 .

[80]  R. A. McGill,et al.  Growth of organic thin films by the matrix assisted pulsed laser evaporation (MAPLE) technique , 1999 .

[81]  Zhengjun Zhang,et al.  Melting and optical properties of ZnO nanorods , 2006 .

[82]  C. Muratore,et al.  Electrostatic quadrupole plasma mass spectrometer measurements during thin film depositions using simultaneous matrix assisted pulsed laser evaporation and magnetron sputtering , 2010 .

[83]  L. Vicari,et al.  Biomaterial thin film deposition and characterization by means of MAPLE technique , 2007 .

[84]  R. A. McGill,et al.  Processing of functional polymers and organic thin films by the matrix-assisted pulsed laser evaporation (MAPLE) technique , 2002 .

[85]  S. Berg,et al.  Fundamental understanding and modeling of reactive sputtering processes , 2005 .

[86]  Paulo J. G. Coutinho,et al.  Characterization of TiO2 Nanoparticles in Langmuir-Blodgett Films , 2006, Journal of Fluorescence.

[87]  I. Mihailescu,et al.  Comparative study on Pulsed Laser Deposition and Matrix Assisted Pulsed Laser Evaporation of urease thin films , 2009 .

[88]  Steven G. Hansen,et al.  Arrival time measurements of films formed by pulsed laser evaporation of polycarbonate and selenium , 1988 .

[89]  Pietro Siciliano,et al.  Synthesis of SnO2 and ZnO Colloidal Nanocrystals from the Decomposition of Tin(II) 2-Ethylhexanoate and Zinc(II) 2-Ethylhexanoate , 2005 .

[90]  Jørgen Schou,et al.  UV and RIR matrix assisted pulsed laser deposition of organic MEH-PPV films , 2004 .

[91]  T. Egawa,et al.  Formation Mechanism for High-Surface-Area Anatase Titania Nanoparticles Prepared by Metalorganic Chemical Vapor Deposition , 2004 .

[92]  Patrick T. Underhill,et al.  Spin coating of thin and ultrathin polymer films , 1998 .

[93]  Hiroyuki Honda,et al.  Tissue engineering using magnetite nanoparticles and magnetic force: heterotypic layers of cocultured hepatocytes and endothelial cells. , 2004, Tissue engineering.

[94]  A. Luches,et al.  Cubic boron nitride deposition on silicon substrates at room temperature by KrF excimer laser ablation of h-BN , 2000 .

[95]  Van Krevelen.  Properties of Polymers: Their Correlation with Chemical Structure; their Numerical Estimation and Prediction from Additive Group Contributions , 2009 .

[96]  C. Logofatu,et al.  Thin films of Cu(II)-o,o′-dihydroxy azobenzene nanoparticle-embedded polyacrylic acid (PAA) for nonlinear optical applications developed by matrix assisted pulsed laser evaporation (MAPLE) , 2009 .

[97]  R. A. McGill,et al.  Laser transfer of biomaterials: Matrix-assisted pulsed laser evaporation (MAPLE) and MAPLE Direct Write , 2003 .

[98]  A. Luches,et al.  Pulsed laser deposition of magnetic films by ablation of Co- and Fe-based amorphous alloys , 2004 .

[99]  L. Vicari,et al.  Matrix-Assisted Pulsed Laser Evaporation of polythiophene films , 2008 .

[100]  A. Luches,et al.  Matrix-assisted pulsed laser evaporation of polyfluorene thin films , 2007 .

[101]  R. A. McGill,et al.  The deposition, structure, pattern deposition, and activity of biomaterial thin-films by matrix-assisted pulsed-laser evaporation (MAPLE) and MAPLE direct write , 2001 .

[102]  I. Mihailescu,et al.  MAPLE prepared polymeric thin films for non-linear optic applications , 2009 .

[103]  I. Stamatin,et al.  Thin films of polymer mimics of cross-linking mussel adhesive proteins deposited by matrix assisted pulsed laser evaporation , 2009 .

[104]  J. Schou,et al.  Production of active lysozyme films by matrix assisted pulsed laser evaporation at 355 nm , 2007 .

[105]  A. Stiff-Roberts,et al.  The impact of laser-target absorption depth on the surface and internal morphology of matrix-assisted pulsed laser evaporated conjugated polymer thin films , 2009 .

[106]  Jian Xu,et al.  Harvest of near infrared light in PbSe nanocrystal-polymer hybrid photovoltaic cells , 2006 .

[107]  H. D. Wu,et al.  Direct writing of conformal mesoscopic electronic devices by MAPLE DW , 2000 .

[108]  M. Jelínek,et al.  Polypyrrole active layers of gas sensors prepared by MAPLE technology , 2007 .

[109]  P. R. Miller,et al.  Deposition of antibacterial of poly(1,3-bis-(p-carboxyphenoxy propane)-co-(sebacic anhydride)) 20:80/gentamicin sulfate composite coatings by MAPLE , 2011 .

[110]  P. Messersmith,et al.  Processing of mussel adhesive protein analog thin films by matrix assisted pulsed laser evaporation , 2005 .

[111]  Tx,et al.  Films of Mn12-acetate by pulsed laser evaporation , 2004, cond-mat/0409061.

[112]  Stephan Barcikowski,et al.  Pure colloidal metal and ceramic nanoparticles from high-power picosecond laser ablation in water and acetone , 2009, Nanotechnology.

[113]  W. Ahmed,et al.  An investigation of LPCVD and PECVD of in situ doped polycrystalline silicon for VLSI , 1992 .

[114]  R. A. McGill,et al.  Use of Matrix Assisted Pulsed Laser Evaporation (Maple) for the Growth of Organic Thin Films , 1998 .

[115]  M. Vrnata,et al.  Thin organic layers prepared by MAPLE for gas sensor application , 2006, 2006 Conference on Optoelectronic and Microelectronic Materials and Devices.

[116]  S. Shah,et al.  Deposition of polytetrafluoroethylene films by laser ablation , 1993 .

[117]  A. Stiff-Roberts,et al.  Resonant infrared matrix-assisted pulsed laser evaporation of CdSe colloidal quantum dot/poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-(1-cyano vinylene)phenylene] hybrid nanocomposite thin films , 2009 .

[118]  I. Mihailescu,et al.  Laser processing of natural mussel adhesive protein thin films , 2007 .

[119]  G. Blanchet.  Deposition of Poly(methyl methacrylate) Films by UV Laser Ablation , 1995 .

[120]  B. D. Malhotra,et al.  Vacuum‐deposited metal/polyaniline Schottky device , 1992 .

[121]  Richard F. Haglund,et al.  Properties of conductive polymer films deposited by infrared laser ablation , 2007 .

[122]  D. Modarelli,et al.  Photophysical properties of a series of free-base corroles. , 2005, The journal of physical chemistry. A.

[123]  M. G. Manera,et al.  Dependence of the surface roughness of MAPLE-deposited films on the solvent parameters , 2010 .

[124]  Robert W. Eason,et al.  Pulsed laser deposition of thin films : applications-led growth of functional materials , 2006 .

[125]  M. G. Manera,et al.  MAPLE deposition of methoxy Ge triphenylcorrole thin films , 2008 .