magnetron sputtering

A high performance photocatalytic TiO thin film was successfully obtained by reactive DC magnetron sputtering. The film was 2 deposited onto SiO -coated glass at a substrate temperature of 220 C using a titanium metal target in O 100% atmosphere. The 2 2 film showed good uniformity of thickness in a large area with the optical transmittance of 80% in the visible region. The Ž . decomposition ability of acetaldehyde CH CHO of the film under UV irradiation was almost the same as that of the 3 sol gel-derived TiO thin film but the sputtered film showed a much higher mechanical durability. The characterization of the 2 films was carried out using XRD, SEM, AFM, XPS and SIMS, and the electronic structures of the films were calculated using a first-principle calculation method based on the density functional theory. It was found that the amount of incorporated 18O into the film was larger for the films with lower photocatalytic activity when the films were annealed in 18O N atmosphere. This 2 2 result indicates that the amount of oxygen vacancies, which were occupied by incorporated 18O, was larger for the films with lower photocatalytic activity. Furthermore, the introduction of structural defects associated with oxygen vacancies was found to create some energy levels around the mid-gap, indicating that they could work as recombination centers of photo-induced holes and electrons, causing the decrease in photocatalytic activity. Therefore, the decrease in the structural defects associated with oxygen vacancies is important for improving the photocatalytic activity of the films. 2001 Elsevier Science B.V. All rights reserved.