Short- and long-term performance of the “Tecnaria” stud connector for timber-concrete composite beams

The paper presents the results of some experimental tests performed on the shear stud connection system for timber-concrete composite beams manufactured by the Tecnaria Ltd. Some push-out specimens constructed using both normal weight (NW) and light weight (LW) concrete were subjected to collapse and long-term creep tests. During the collapse test, the connector exhibited significant strength and stiffness. In the creep test performed in constant environmental conditions, delayed (creep) deformations took place mainly during the first days after loading. The next part of the creep test, conducted under cycles of environmental relative humidity, was characterized by an increase in delayed deformations (the so-called mechano-sorptive effect) due to the hygroscopic behaviour of timber around the connector. The amount of delayed deformation depended upon the cycle duration and was negligible for short period (less than one week) cycles. The use of LW concrete instead of␣NW concrete was found not to significantly affect␣the performance of the connection system␣neither in the long-term, nor in the collapse tests.

[1]  R. G. Slutter,et al.  Shear Strength of Stud Connectors in Lightweight and Normal-Weight Concrete , 1971, Engineering Journal.

[2]  A. Hanhijärvi,et al.  Advances in the knowledge of the influence of moisture changes on the long-term mechanical performance of timber structures , 2000 .

[3]  Ario Ceccotti,et al.  Timber–concrete composite structures , 1995 .

[4]  M. Fragiacomo.  A finite element model for long-term analysis of timber-concrete composite beams , 2005 .

[5]  Roberto Capozucca.  Bond stress system of composite concrete—timber beams , 1998 .

[6]  Massimo Fragiacomo,et al.  Long-Term Behavior of Timber–Concrete Composite Beams. I: Finite Element Modeling and Validation , 2006 .

[7]  Antti Hanhijärvi.  Computational method for predicting the long-term performance of timber beams in variable climates , 2000 .

[8]  Massimo Fragiacomo.  Long-Term Behavior of Timber–Concrete Composite Beams. II: Numerical Analysis and Simplified Evaluation , 2006 .

[9]  Eric P. Steinberg,et al.  Connectors for Timber–Lightweight Concrete Composite Structures , 2003 .

[10]  T. Toratti.  Creep of Timber Beams in a Variable Environment , 1992 .

[11]  Julius Natterer,et al.  Investigation of Notched Composite Wood–Concrete Connections , 2004 .

[12]  Nilson Tadeu Mascia,et al.  Benefits of timber-concrete composite action in rural bridges , 2004 .

[13]  M. Fragiacomo,et al.  Finite-Element Model for Collapse and Long-Term Analysis of Steel–Concrete Composite Beams , 2004 .

[14]  Ezio Giuriani,et al.  Stud Shear Connection Design for Composite Concrete Slab and Wood Beams , 2002 .

[15]  A W Beeby,et al.  CONCISE EUROCODE FOR THE DESIGN OF CONCRETE BUILDINGS. BASED ON BSI PUBLICATION DD ENV 1992-1-1: 1992. EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 1: GENERAL RULES AND RULES FOR BUILDINGS , 1993 .