Titanium containing amorphous hydrogenated silicon carbon films (a-Si:C:H/Ti) for durable solar absorber coatings

Abstract By the incorporation of silicon into titanium-containing amorphous hydrogenated carbon films (a-C:H/Ti), the lifetime stability at 250°C in air can be strongly enhanced. A combined PVD/PECVD process for the vacuum deposition of these titanium-containing amorphous hydrogenated silicon carbon films (a-Si:C:H/Ti) is described. Elemental compositions of the deposited films have been determined by in situ core-level photoelectron spectroscopy (XPS). Optical constants for these films have been determined in the wavelength range from 400 to 2500 nm by means of spectrophotometry. Single layers of a-Si:C:H/Ti and a-C:H/Ti deposited on aluminum and copper substrates have been subjected to comparative aging tests. At 250°C in air, the stability of the a-Si:C:H/Ti films is significantly higher than that of the a-C:H/Ti films. If the silicon content is not too high, the aging properties under humid conditions do not suffer a lot from the incorporation of silicon. However, if the silicon content is clearly higher than the carbon content, the humidity resistance will decrease. For an absorber coating for flat plate solar collectors, the optimized silicon content is expected to be in the range where the high-temperature stability in air is already improved, and where the humidity resistance is still good. For vacuum collectors, a higher silicon content might be advantageous.

[1]  P. Oelhafen,et al.  In situ photoelectron spectroscopy of titanium-containing amorphous hydrogenated carbon films , 1999 .

[2]  W. A. Dench,et al.  Quantitative electron spectroscopy of surfaces: A standard data base for electron inelastic mean free paths in solids , 1979 .

[3]  M. Hansen,et al.  Constitution of Binary Alloys , 1958 .

[4]  W. Meng,et al.  Plasma-assisted deposition and characterization of Ti-containing diamondlike carbon coatings , 1998 .

[5]  Volker Wittwer,et al.  Optical materials technology for energy efficiency and solar energy conversion XIII : 18-22 April 1994, Freiburg, FRG , 1994 .

[6]  O. S. Heavens,et al.  Optical Properties of Thin Solid Films , 2011 .

[7]  P. Oelhafen,et al.  A photoelectron spectroscopy study of Ti/Cu interfaces , 1998 .

[8]  M. Braun,et al.  DLC multilayer coatings for wear protection , 1995 .

[9]  E. Palik.  Handbook of Optical Constants of Solids , 1997 .

[10]  D. A. Shirley,et al.  High-Resolution X-Ray Photoemission Spectrum of the Valence Bands of Gold , 1972 .

[11]  P. Oelhafen,et al.  Accelerated aging tests of chromium containing amorphous hydrogenated carbon coatings for solar collectors , 1998 .

[12]  Andreas Schüler,et al.  Application of titanium containing amorphous hydrogenated carbon films (a-C:H/Ti) as optical selective solar absorber coatings , 2000 .

[13]  K. Reichelt,et al.  Characterization of metal-containing amorphous hydrogenated carbon films , 1992 .

[14]  P. Oelhafen,et al.  Optical properties of titanium containing amorphous hydrogenated carbon films (a-C:H/Ti) , 2000 .

[15]  R. Hauert,et al.  Surface analysis and bioreactions of Ti‐ and V‐containing a‐C : H , 1999 .

[16]  M. Delplancke,et al.  Structure and composition of hydrogenated TixCy thin films prepared by reactive sputtering , 1995 .