Microstructure and strengthening behavior in high content SiC nanowires reinforced SiC composites

[1]  Shikuan Sun,et al.  Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control , 2023, Journal of the European Ceramic Society.

[2]  Shengchuan Wu,et al.  In-situ characterization on crack propagation behavior of SiCf/SiC composites during monotonic tensile loading , 2022, Journal of the European Ceramic Society.

[3]  Y. Hua,et al.  Properties of super heat-resistant silicon carbide fibres with in situ BN coating , 2022, Journal of the European Ceramic Society.

[4]  Yang Liu,et al.  Dense SiC ceramics prepared by using amorphous sintering additives , 2022, Ceramics International.

[5]  Dequan Shi,et al.  Microstructure control of SiCw/SiC composites based on SLS technology , 2022, Journal of the European Ceramic Society.

[6]  Jianjun Chen,et al.  Microstructure and mechanical properties of hot-pressed SiC nanofiber reinforced SiC composites , 2022, Ceramics International.

[7]  Z. Ding,et al.  Property evolution of geopolymer composites with SiC whiskers loaded with BN coating at elevated temperatures , 2021, Construction and Building Materials.

[8]  Weijie Li,et al.  Effect of pyrocarbon interphase texture and thickness on tensile damage and fracture in T‐700 TM C/SiC minicomposites , 2021, Journal of the American Ceramic Society.

[9]  H. Bang,et al.  Influence of pyrolysis and melt infiltration temperatures on the mechanical properties of SiCf/SiC composites , 2021, Ceramics International.

[10]  R. Luo,et al.  Mechanical properties evolution of SiCf/SiC composites with a BN/SiC multilayer interface oxidized at elevated temperature , 2021 .

[11]  Jiawei Fu,et al.  Strengthening mechanism of SiC nanowires on microhardness of AZ91D-based composites , 2021 .

[12]  D. Fang,et al.  Progress and challenges towards additive manufacturing of SiC ceramic , 2021, Journal of Advanced Ceramics.

[13]  R. Luo,et al.  Effect of SiC nanowires on the mechanical properties and thermal conductivity of 3D-SiCf/SiC composites prepared via precursor infiltration pyrolysis , 2021 .

[14]  J. Zhang,et al.  Joining of Cf/SiC composites and Si3N4 ceramic with Y2O3–Al2O3–SiO2 glass filler for high-temperature applications , 2021 .

[15]  Ai-min Pang,et al.  Mechanical properties and strengthening mechanism of SiCf/SiC mini-composites modified by SiC nanowires , 2021 .

[16]  Lai-fei Cheng,et al.  A novel strategy to prepare BN interface and its effects on microstructure and properties of SiCw/BN/SiC composites , 2020 .

[17]  Qin Shan,et al.  More effective crack self‐healing capability of SiC f /SiC‐B 4 C with Al 2 O 3 modified under wet environment , 2020 .

[18]  Lai-fei Cheng,et al.  Pressure-less joining of SiCf/SiC composites by Y2O3–Al2O3–SiO2 glass: Microstructure and properties , 2020 .

[19]  Rongzheng Liu,et al.  Preparation of SiC@Al2O3–Y2O3 core-shell nanoparticles by a slow precipitation method for dense SiC sintering , 2020 .

[20]  H. Klemm,et al.  Wet chemical deposition of BN, SiC and Si3N4 interphases on SiC fibers , 2020 .

[21]  K. Zhou,et al.  3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions , 2020 .

[22]  Aijun Li,et al.  Influence of pressure on chemical vapor deposition of boron nitride from BCl3/NH3/H2 gas mixtures , 2020 .

[23]  Yazheng Yang,et al.  Stereolithography‐based additive manufacturing of gray‐colored SiC ceramic green body , 2019, Journal of the American Ceramic Society.

[24]  Yiguang Wang,et al.  Effect of temperature on the growth of boron nitride interfacial coatings on SiC fibers by chemical vapor infiltration , 2019, Ceramics International.

[25]  Hejun Li,et al.  Surface modification for carbon/carbon composites with Mg-CaP coating reinforced by SiC nanowire‑carbon nanotube hybrid for biological application , 2019, Applied Surface Science.

[26]  Q. Fu,et al.  Effects of flexural fatigue cycles on the internal friction behavior of SiCnws-C/C composites , 2019, Ceramics International.

[27]  H. Kishimoto,et al.  Appropriate thickness of pyrolytic carbon coating on SiC fiber reinforcement to secure reasonable quasi-ductility on NITE SiC/SiC composites , 2018, Ceramics International.

[28]  Hejun Li,et al.  Effects of pyrocarbon on morphology stability of SiC nanowires at high temperatures , 2018 .

[29]  Hong Liu,et al.  Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering , 2017 .

[30]  G. Reddy,et al.  Pressureless sintering of (ZrB2–SiC–B4C) composites with (Y2O3 + Al2O3) additions , 2015 .

[31]  Robert O. Ritchie,et al.  Cyclic Fatigue–Crack Propagation Behavior in Silicon Carbide: Long‐ and Small‐Crack Behavior , 2001 .

[32]  Charles M. Lieber,et al.  Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes , 1997 .

[33]  M. Harmer,et al.  Effect of Pore Distribution on Microstructure Development: I, Matrix Pores , 1988 .

[34]  H. Seifert,et al.  Liquid phase formation in the system SiC, Al2O3, Y2O3 , 2011 .