A comprehensive model for analysis of real-time optical performance of a solar power tower with a multi-tube cavity receiver

A comprehensive model and corresponding code named after SPTOPTIC for analysis of the real-time optical performance of a Solar Power Tower (SPT) with a Multi-Tube Cavity Receiver (MTCR) were developed using Monte Carlo Ray Tracing (MCRT) method. After validation, the model was used to study the optical performance of the DAHAN plant. The model-obtained results show that the solar flux in the MTCR exhibits a significant non-uniformity, showing a maximum flux of 5.141×105Wm−2 on the tubes. A comparison of the tracking models indicates that it is a good practice to treat the tracking errors as the random errors of the tracking angles when considering the random effect on the solar flux distribution. Study also indicates that multi-point aiming strategy of tracking helps homogenizing the flux and reducing the energy maldistribution among the tubes. Additionally, time-dependent optical efficiencies were investigated, and the yearly efficiency for the energy absorbed by the tubes was found to be 65.9%. At the end of the study, the cavity effect on the efficiency was revealed quantitatively, which indicates that the optical loss can be reduced significantly by the cavity effect, especially when the coating absorptivity is relatively low. It is concluded that the present model is reliable and suitable for predicting both the detailed real-time solar flux and the real-time efficiency of SPT.

[1]  Wang Fuqiang,et al.  Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube , 2016 .

[2]  Ming-Jia Li,et al.  Modeling a hybrid methodology for evaluating and forecasting regional energy efficiency in China , 2017 .

[3]  Ming-Jia Li,et al.  Thermal analysis of solar central receiver tube with porous inserts and non-uniform heat flux , 2017 .

[4]  Y. Qiu,et al.  Non-uniform characteristics of solar flux distribution in the concentrating solar power systems and its corresponding solutions: A review , 2016 .

[5]  Ya-Ling He,et al.  A MCRT and FVM coupled simulation method for energy conversion process in parabolic trough solar collector , 2011 .

[6]  Liu Damping.  The Development of a Software for Solar Radiation and its Verification by the Measurement Results on the Spot , 2002 .

[7]  Ya-Ling He,et al.  A comprehensive model for optical and thermal characterization of a linear Fresnel solar reflector with a trapezoidal cavity receiver , 2016 .

[8]  C. L. Pitman,et al.  Real-time computation and control of solar flux density on a central receiver (Solar Two) (preheat) , 1996 .

[9]  Raya Al-Dadah,et al.  The effect of receiver geometry on the optical performance of a small-scale solar cavity receiver for parabolic dish applications , 2016 .

[10]  Robert Pitz-Paal,et al.  A New Fast Ray Tracing Tool for High-Precision Simulation of Heliostat Fields , 2009 .

[11]  Ya-Ling He,et al.  A new modelling method and unified code with MCRT for concentrating solar collectors and its applications , 2013 .

[12]  Peiwen Li,et al.  Vapor pressure and corrosivity of ternary metal-chloride molten-salt based heat transfer fluids for use in concentrating solar power systems , 2015 .

[13]  Viorel Badescu,et al.  Theoretical derivation of heliostat tracking errors distribution , 2008 .

[14]  Wang Fuqiang,et al.  Transient thermal performance response characteristics of porous-medium receiver heated by multi-dish concentrator , 2016 .

[15]  Ya-Ling He,et al.  Analysis of thermal stress and fatigue fracture for the solar tower molten salt receiver , 2016 .

[16]  Ming-Jia Li,et al.  Thermal performance analysis of a parabolic trough solar collector using supercritical CO2 as heat transfer fluid under non-uniform solar flux , 2017 .

[17]  Eric Hu,et al.  Impact of start-up and shut-down losses on the economic benefit of an integrated hybrid solar cavity receiver and combustor , 2016 .

[18]  Saad Mahmoud,et al.  The optical efficiency of three different geometries of a small scale cavity receiver for concentrated solar applications , 2016 .

[19]  Jon T. Van Lew,et al.  Generalized charts of energy storage effectiveness for thermocline heat storage tank design and calibration , 2011 .

[20]  Wang Fuqiang,et al.  Parabolic trough receiver with corrugated tube for improving heat transfer and thermal deformation characteristics , 2016 .

[21]  Yinshi Li,et al.  A liquid-electrolyte-free anion-exchange membrane direct formate-peroxide fuel cell , 2016 .

[22]  Zhifeng Wang,et al.  Energy and exergy analysis of solar power tower plants , 2011 .

[23]  Ya-Ling He,et al.  Study on optical and thermal performance of a linear Fresnel solar reflector using molten salt as HTF with MCRT and FVM methods , 2015 .

[24]  Clifford K. Ho,et al.  Solar optical codes evaluation for modeling and analyzing complex solar receiver geometries , 2014, Optics & Photonics - Optical Engineering + Applications.

[25]  Frédérik Thiery,et al.  Control of the flux distribution on a solar tower receiver using an optimized aiming point strategy: Application to THEMIS solar tower , 2013 .

[26]  Vassilis Belessiotis,et al.  Experimental and numerical investigation of a linear Fresnel solar collector with flat plate receiver , 2016 .

[27]  Xin Li,et al.  Modeling and dynamic simulation of the collector and receiver system of 1MWe DAHAN solar thermal power tower plant , 2012 .

[28]  Hongli Zhang,et al.  Modeling and simulation of 1 MWe solar tower plant's solar flux distribution on the central cavity receiver , 2012, Simul. Model. Pract. Theory.

[29]  M. R. Rodríguez-Sánchez,et al.  Thermal design guidelines of solar power towers , 2014 .

[30]  K. A. Antonopoulos,et al.  Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube , 2016 .

[31]  Ya-Ling He,et al.  Numerical simulation of solar radiation transmission process for the solar tower power plant: From the heliostat field to the pressurized volumetric receiver , 2013 .

[32]  Ahmet Murat Mecit,et al.  Optical analysis and thermal modeling of a window for a small particle solar receiver , 2014 .

[33]  Ya-Ling He,et al.  An entransy dissipation-based optimization principle for solar power tower plants , 2014 .

[34]  Rubén Abbas,et al.  Parabolic trough collector or linear Fresnel collector? A comparison of optical features including thermal quality based on commercial solutions , 2016 .

[35]  Yuwen Zhang,et al.  A novel integrated simulation approach couples MCRT and Gebhart methods to simulate solar radiation transfer in a solar power tower system with a cavity receiver , 2016 .

[36]  Ya-Ling He,et al.  Study on combined heat loss of a dish receiver with quartz glass cover , 2013 .

[37]  Giampaolo Manzolini,et al.  Comparison of Linear and Point Focus Collectors in Solar Power Plants , 2013 .

[38]  Ya-Ling He,et al.  Modeling of the Dish Receiver With the Effect of Inhomogeneous Radiation Flux Distribution , 2014 .

[39]  Ya-Ling He,et al.  Numerical investigations on coupled heat transfer and synthetical performance of a pressurized volumetric receiver with MCRT–FVM method , 2013 .

[40]  F. Collado.  One-point fitting of the flux density produced by a heliostat , 2010 .

[41]  Abdallah Khellaf,et al.  A review of studies on central receiver solar thermal power plants , 2013 .

[42]  Chuncheng Zang,et al.  Experimental and theoretical study of wind loads and mechanical performance analysis of heliostats , 2014 .

[43]  Qi Liang,et al.  Geometric optimization on optical performance of parabolic trough solar collector systems using particle swarm optimization algorithm , 2015 .

[44]  Ya-Ling He,et al.  Numerical optimization of catalyst configurations in a solar parabolic trough receiver–reactor with non-uniform heat flux , 2015 .

[45]  Josua P. Meyer,et al.  Finite-volume ray tracing using Computational Fluid Dynamics in linear focus CSP applications , 2016 .

[46]  Ayad Al Jubori,et al.  Development of three-dimensional optimization of a small-scale radial turbine for solar powered Brayton cycle application , 2017 .

[47]  W. Tao,et al.  A hybrid model for explaining the short-term dynamics of energy efficiency of China’s thermal power plants , 2016 .

[48]  Yu Qiu,et al.  A detailed nonuniform thermal model of a parabolic trough solar receiver with two halves and two inactive ends , 2015 .

[49]  Qiang Yu,et al.  Modeling and simulation of 1 MW DAHAN solar thermal power tower plant , 2011 .

[50]  Alvaro Sanchez-Gonzalez,et al.  Solar flux distribution on central receivers: A projection method from analytic function , 2015 .

[51]  Zhifeng Wang,et al.  Modeling and simulation of the pioneer 1 MW solar thermal central receiver system in China , 2009 .

[52]  Pierre Garcia,et al.  Codes for solar flux calculation dedicated to central receiver system applications : A comparative review , 2008 .

[53]  Qiang Yu,et al.  Simulation and analysis of the central cavity receiver’s performance of solar thermal power tower plant , 2012 .

[54]  P. Ekins,et al.  The geographical distribution of fossil fuels unused when limiting global warming to 2 °C , 2015, Nature.

[55]  David Sánchez,et al.  Comparison of Different Strategies for Heliostats Aiming Point in Cavity and External Tower Receivers , 2016 .

[56]  Yong Shuai,et al.  Thermal performance analysis of porous media receiver with concentrated solar irradiation , 2013 .

[57]  Robert Pitz-Paal,et al.  Assessment of the potential improvement due to multiple apertures in central receiver systems with secondary concentrators , 2006 .