Phase and mechanical characterization of poly(ether imide)/polyarylate injection moulded blends

[1]  J. Eguiazábal,et al.  Phase behaviour, morphology and properties of poly(ether imide)/polyarylate blends , 1996 .

[2]  J. Eguiazábal,et al.  Compatibility in immiscible poly(ether ether ketone)/poly(ether sulfone) blends , 1995 .

[3]  A. Donald,et al.  Measurement of the interfacial tension between polyethersulfone and a thermotropic liquid‐crystalline copolyester , 1993 .

[4]  Guo Qipeng,et al.  Tensile properties of blends of poly(ether sulphone) with a poly(ether imide) , 1992 .

[5]  J. Eguiazábal,et al.  Phase behavior and mechanical properties of injection molded poly(ethylene terephthalate)/polyarylate blends , 1992 .

[6]  G. Groeninckx,et al.  Melt‐spinning of in‐situ composites of a thermotropic liquid crystalline polyester in a miscible matrix of poly(ether ether ketone) and poly(ether imide) , 1992 .

[7]  J. Nazábal,et al.  Effects of injection temperature on the mixing level and properties of injection‐mixed PMMA–phenoxy blends , 1992 .

[8]  A. Zaldua,et al.  Slit die flow measurements of a liquid crystalline polyesteramide and its blends with polyarylate , 1992 .

[9]  J. Eguiazábal,et al.  Phase behaviour and mechanical properties of poly(ether ether ketone)-poly(ether sulphone) blends , 1991 .

[10]  Gilbert F. Lee,et al.  TENSILE YIELD IN POLY(CHLOROTRIFLUOROETHYLENE) AND POLY(VINYLIDENE FLUORIDE) , 1991 .

[11]  L. Utracki,et al.  Polymer Alloys and Blends , 1990 .

[12]  L. Nicolais,et al.  Improvement of the processability of advanced polymers , 1990 .

[13]  P. N. Chen,et al.  Film and membrane properties of polybenzimidazole (PBI) and polyarylate alloys , 1990 .

[14]  B. D. Favis,et al.  Influence of composition on the morphology of polypropylene/polycarbonate blends , 1988 .

[15]  L. Robeson,et al.  Miscible blends of poly(aryl ether ketone)s and polyetherimides , 1988 .

[16]  H. V. Oene,et al.  The phase behavior and mechanical properties of polyarylate and polycarbonate blends , 1987 .

[17]  J. Manson,et al.  Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks , 1986 .

[18]  I. Mondragon,et al.  Tensile properties of polyarylate‐polycarbonate blends , 1985 .

[19]  M. Kimura,et al.  Blends of poly(butylene terephthalate) and a polyarylate before and after transesterification , 1983 .

[20]  A. Rudin.  Copolymers in Polymer Blends , 1980 .

[21]  F. E. Karasz,et al.  Compatibility of Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)/Poly(styrene-co-4-chlorostyrene) Blends. 1. Differential Scanning Calorimetry and Density Studies , 1978 .