Angle diversity receiver for indoor MIMO visible light communications

In indoor visible light communication systems, transmitters are usually within the line of sight of the receiver. In order to enjoy the benefits of using multiple-input-multiple-output (MIMO) system, the technique for reducing channel correlation is important. This paper proposes a MIMO system using an angle diversity receiver (ADR) to achieve high spatial multiplexing gain. In our proposed system, receiver consists of multiple photodetectors (PDs) whose normals are pointing toward different directions. As a result, the incident angles from the same light emitting diode (LED) are different for different PDs and hence, channel correlation can be reduced. The spatial separation among PDs is small and no imaging lens is required. The proposed receiver is suitable for mounting on small devices like smartphones. Performance comparisons, in terms of analytical, simulated and experimental bit error rates (BER), are carried out for a MIMO system with 4 LED transmitters and 5 PD receivers. Results show that the proposed receiver performs better than other existing non-imaging receiver designs. Our proposed MIMO system is a practically feasible solution to enjoy low channel correlation and support mobility at receiver.

[1]  Andrew R. Nix,et al.  Design and Performance Assessment of High-Capacity MIMO Architectures in the Presence of a Line-of-Sight Component , 2007, IEEE Transactions on Vehicular Technology.

[2]  Harald Haas,et al.  Performance Comparison of MIMO Techniques for Optical Wireless Communications in Indoor Environments , 2013, IEEE Transactions on Communications.

[3]  Harald Haas,et al.  Practical MIMO Capacity for Indoor Optical Wireless Communication with White LEDs , 2013, 2013 IEEE 77th Vehicular Technology Conference (VTC Spring).

[4]  Joseph M. Kahn,et al.  Angle diversity for nondirected wireless infrared communication , 1998, ICC '98. 1998 IEEE International Conference on Communications. Conference Record. Affiliated with SUPERCOMM'98 (Cat. No.98CH36220).

[5]  Thomas Q. Wang,et al.  Performance of indoor MIMO optical wireless system using linear receiver with prism array , 2014, 2014 Australian Communications Theory Workshop (AusCTW).

[6]  D. C. O'Brien,et al.  Visible Light Communications: Challenges and potential , 2011, IEEE Photonic Society 24th Annual Meeting.

[7]  Zabih Ghassemlooy,et al.  Design and analysis of an angular‐segmented full‐mobility visible light communications receiver , 2014, Trans. Emerg. Telecommun. Technol..

[8]  John G. Proakis,et al.  Digital Communications , 1983 .

[9]  Harald Haas,et al.  Indoor optical wireless communication: potential and state-of-the-art , 2011, IEEE Communications Magazine.

[10]  Geir E. Øien,et al.  Design of Optimal High-Rank Line-of-Sight MIMO Channels , 2007, IEEE Transactions on Wireless Communications.

[11]  Sang-Kook Han,et al.  Indoor Location Estimation Based on LED Visible Light Communication Using Multiple Optical Receivers , 2013, IEEE Communications Letters.

[12]  Dominic C. O'Brien,et al.  High data rate multiple input multiple output (MIMO) optical wireless communications using white led lighting , 2009, IEEE Journal on Selected Areas in Communications.